The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Standards for the Characterization of Endurance in Resistive Switching Devices
Open accessAbstract
Abstract Resistive switching (RS) devices are emerging electronic components that could have applications in multiple types of integrated circuits, including electronic memories, true random number generators, radiofrequency switches, neuromorphic vision sensors, and artificial neural networks. The main factor hindering the massive employment of RS devices in commercial circuits is related to variability and reliability issues, which are usually evaluated through switching endurance tests. However, we note that most studies that claimed high endurances >106 cycles were based on resistance versus cycle plots that contain very few data points (in many cases even <20), and which are collected in only one device. We recommend not to use such a characterization method because it is highly inaccurate and unreliable (i.e., it cannot reliably demonstrate that the device effectively switches in every cycle and it ignores cycle-to-cycle and device-to-device variability). This has created a blurry vision of the real performance of RS devices and in many cases has exaggerated their potential. This article proposes and describes a method for the correct characterization of switching endurance in RS devices; this method aims to construct endurance plots showing one data point per cycle and resistive state and combine data from multiple devices. Adopting this recommended method should result in more reliable literature in the field of RS technologies, which should accelerate their integration in commercial products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298 · cited 2×
“12,13 Therefore, the conductance in LRS (after set) and in HRS (after reset) can be very di ff erent after each RS cycle (Figure 2a,b), 39,40 and the switching voltages, times, and energies may also be slightly di ff erent in each cycle, 33 which is why it is often said that the RS is a stochastic…”
Self-citationLee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228
Fully hardware-implemented memristor convolutional neural network
Yao, P., Wu, H., Gao, B., Tang, J., Zhang, Q., Zhang, W., Yang, J. J., & Qian, H. (2020) · Nature · doi:10.1038/s41586-020-1942-4 · Cited by 2,179
Self-citationYu, S., Wu, Y., Jeyasingh, R., Kuzum, D., & Wong, H.-S. P. (2011) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2011.2147791 · Cited by 805
A fully integrated reprogrammable memristor–CMOS system for efficient multiply–accumulate operations
Cai, F., Correll, J. M., Lee, S. H., Lim, Y., Bothra, V., Zhang, Z., Flynn, M. P., & Lu, W. D. (2019) · Nature Electronics · doi:10.1038/s41928-019-0270-x · Cited by 728
Nanoscale Memory Elements Based on Solid-State Electrolytes
Kozicki, M. N., Park, M., & Mitkova, M. (2005) · IEEE Transactions On Nanotechnology · doi:10.1109/tnano.2005.846936 · Cited by 540
Stochastic memristive devices for computing and neuromorphic applications
Gaba, S., Sheridan, P., Zhou, J., Choi, S., & Lu, W. (2013) · Nanoscale · doi:10.1039/c3nr01176c · Cited by 307
High speed resistive switching in Pt∕TiO2∕TiN film for nonvolatile memory application
Yoshida, C., Tsunoda, K., Noshiro, H., & Sugiyama, Y. (2007) · Applied Physics Letters · doi:10.1063/1.2818691 · Cited by 271
Nanoscale resistive memory with intrinsic diode characteristics and long endurance
Kim, K.-H., Hyun Jo, S., Gaba, S., & Lu, W. (2010) · Applied Physics Letters · doi:10.1063/1.3294625 · Cited by 187
Cited by
Memristive technologies for data storage, computation, encryption, and radio-frequency communication
Lanza, M., Sebastian, A., Lu, W. D., Le Gallo, M., Chang, M.-F., Akinwande, D., Puglisi, F. M., Alshareef, H. N., Liu, M., & Roldan, J. B. (2022) · Science · doi:10.1126/science.abj9979 · Cited by 708
Self-citationHybrid 2D–CMOS microchips for memristive applications
Zhu, K., Pazos, S., Aguirre, F., Shen, Y., Yuan, Y., Zheng, W., Alharbi, O., Villena, M. A., Fang, B., Li, X., et al. (2023) · Nature · doi:10.1038/s41586-023-05973-1 · Cited by 324
Self-citationIn-Depth Physical Mechanism Analysis and Wearable Applications of HfOx-Based Flexible Memristors
Zhu, S., Sun, B., Zhou, G., Guo, T., Ke, C., Chen, Y., Yang, F., Zhang, Y., Shao, J., & Zhao, Y. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16569 · Cited by 76
Yoon, J. H., Song, Y.-W., Ham, W., Park, J.-M., & Kwon, J.-Y. (2023) · APL Materials · doi:10.1063/5.0149393 · Cited by 74
Metadata
- Authors
- Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., Wiefels, S., Menzel, S., Valov, I., Villena, M. A., Miranda, E., Jing, X., Campabadal, F., Gonzalez, M. B., Aguirre, F., Palumbo, F., Zhu, K., Roldan, J. B., Puglisi, F. M., Larcher, L., Hou, T.-H., Prodromakis, T., Yang, Y., Huang, P., Wan, T., Chai, Y., Pey, K. L., Raghavan, N., Dueñas, S., Wang, T., Xia, Q., & Pazos, S.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-11-03
- Volume
- 15
- Issue
- 11
- Pages
- 17214-17231
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3210512841
- Cited by
- 262
- References
- 15
- FWCI
- 12.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Standards for the Characterization of Endurance in Resistive Switching Devices. https://app.cochat.ai/papers/10.1021/acsnano.1c06980
- The paper
- Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., Wiefels, S., Menzel, S., Valov, I., Villena, M. A., Miranda, E., Jing, X., Campabadal, F., Gonzalez, M. B., Aguirre, F., . . . Pazos, S. (2021). Standards for the Characterization of Endurance in Resistive Switching Devices. ACS Nano. https://doi.org/10.1021/acsnano.1c06980
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.