The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing
Open accessAbstract
Active, programmable control of interfacial adhesion is an important, desired feature of many existing and envisioned systems, including medical tapes, releasable joints, and stamps for transfer printing. Here a design for an elastomeric surface that offers switchable adhesion strength through a combination of peel‐rate dependent effects and actuation of sub‐surface fluid chambers is presented. Microchannels and open reservoirs positioned under a thin surface membrane can be pressurized in a controlled manner to induce various levels of surface deformation via inflation. These pressurized structures demonstrate utility in controllably decreasing the strength of adhesion of flat, solid objects to the elastomeric surface, particularly in the limit of low peel‐rates. Experimental and theoretical studies of these systems reveal the key mechanisms, and guide optimized geometries for broad control over adhesion, in a programmable and reversible manner. Implementing these concepts in stamps for transfer printing enables new modes for deterministic assembly of micro‐ and nanoscale materials onto diverse types of substrates. Collections of silicon plates delivered onto plastic, paper and other surfaces with single or multiply addressable stamps illustrate some of the capabilities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Self-citationNanowire active-matrix circuitry for low-voltage macroscale artificial skin
Takei, K., Takahashi, T., Ho, J. C., Ko, H., Gillies, A. G., Leu, P. W., Fearing, R. S., & Javey, A. (2010) · Nature Materials · doi:10.1038/nmat2835 · Cited by 1,274
Cited by
Advances in Colloidal Assembly: The Design of Structure and Hierarchy in Two and Three Dimensions
Vogel, N., Retsch, M., Fustin, C.-A., del Campo, A., & Jonas, U. (2015) · Chemical Reviews · doi:10.1021/cr400081d · Cited by 767
Synthesis, assembly and applications of semiconductor nanomembranes
Rogers, J. A., Lagally, M. G., & Nuzzo, R. G. (2011) · Nature · doi:10.1038/nature10381 · Cited by 715
Self-citationTransfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
Progress in 2D photonic crystal Fano resonance photonics
Zhou, W., Zhao, D., Shuai, Y.-C., Yang, H., Chuwongin, S., Chadha, A., Seo, J.-H., Wang, K. X., Liu, V., Ma, Z., et al. (2014) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2014.01.001 · Cited by 298
Metadata
- Authors
- Carlson, A., Wang, S., Elvikis, P., Ferreira, P. M., Huang, Y., & Rogers, J. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2012-06-20
- Volume
- 22
- Issue
- 21
- Pages
- 4476-4484
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2096018761
- Cited by
- 175
- References
- 2
- FWCI
- 8.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing. https://app.cochat.ai/papers/10.1002/adfm.201201023
- The paper
- Carlson, A., Wang, S., Elvikis, P., Ferreira, P. M., Huang, Y., & Rogers, J. A. (2012). Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing. Advanced Functional Materials. https://doi.org/10.1002/adfm.201201023
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.