The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Co‐Percolating Graphene‐Wrapped Silver Nanowire Network for High Performance, Highly Stable, Transparent Conducting Electrodes
Abstract
Transparent conducting electrodes (TCEs) require high transparency and low sheet resistance for applications in photovoltaics, photodetectors, flat panel displays, touch screen devices and imagers. Indium tin oxide (ITO), or other transparent conductive oxides, have typically been used, and provide a baseline sheet resistance (RS) vs. transparency (T) relationship. However, ITO is relatively expensive (due to limited abundance of Indium), brittle, unstable, and inflexible; moreover, ITO transparency drops rapidly for wavelengths above 1000 nm. Motivated by a need for transparent conductors with comparable (or better) RS at a given T, as well as flexible structures, several alternative material systems have been investigated. Single‐layer graphene (SLG) or few‐layer graphene provide sufficiently high transparency (≈97% per layer) to be a potential replacement for ITO. However, large‐area synthesis approaches, including chemical vapor deposition (CVD), typically yield films with relatively high sheet resistance due to small grain sizes and high‐resistance grain boundaries (HGBs). In this paper, we report a hybrid structure employing a CVD SLG film and a network of silver nanowires (AgNWs): RS as low as 22 Ω/□ (stabilized to 13 Ω/□ after 4 months) have been observed at high transparency (88% at λ = 550 nm) in hybrid structures employing relatively low‐cost commercial graphene with a starting RS of 770 Ω/□. This sheet resistance is superior to typical reported values for ITO, comparable to the best reported TCEs employing graphene and/or random nanowire networks, and the film properties exhibit impressive stability under mechanical pressure, mechanical bending and over time. The design is inspired by the theory of a co‐percolating network where conduction bottlenecks of a 2D film (e.g., SLG, MoS 2) are circumvented by a 1D network (e.g., AgNWs, CNTs) and vice versa. The development of these high‐performance hybrid structures provides a route towards robust, scalable and low‐cost approaches for realizing high‐performance TCE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Cited by
Liang, J., Li, L., Tong, K., Ren, Z., Hu, W., Niu, X., Chen, Y., & Pei, Q. (2014) · ACS Nano · doi:10.1021/nn405887k · Cited by 673
The Role of Graphene and Other 2D Materials in Solar Photovoltaics
Das, S., Pandey, D., Thomas, J., & Roy, T. (2019) · Advanced Materials · doi:10.1002/adma.201802722 · Cited by 449
Self-citationDu, J., Pei, S., Ma, L., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201304135 · Cited by 400
Ricciardulli, A. G., Yang, S., Wetzelaer, G. A. H., Feng, X., & Blom, P. W. M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706010 · Cited by 267
Ultralight Conductive Silver Nanowire Aerogels
Qian, F., Lan, P. C., Freyman, M. C., Chen, W., Kou, T., Olson, T. Y., Zhu, C., Worsley, M. A., Duoss, E. B., Spadaccini, C. M., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02790 · Cited by 207
Metadata
- Authors
- Chen, R., Das, S. R., Jeong, C., Khan, M. R., Janes, D. B., & Alam, M. A.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2013-04-25
- Volume
- 23
- Issue
- 41
- Pages
- 5150-5158
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2051272760
- Cited by
- 250
- References
- 2
- FWCI
- 20.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.