The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
Abstract
Composites play an important role as structural materials in a range of engineering fields due to their potential to combine the best mechanical properties of their constituents. In biology, composites are ubiquitous and exhibit fascinating and precise architectures at fine length scales; bone, hexactinellid sponges and nacreous abalone shells are prime examples. Here, typical biological composite topologies are emulated with multi‐material 3D printing at micrometer resolution. From base materials that are brittle and exhibit catastrophic failure, synthetic composites are created with superior fracture mechanical properties exhibiting deformation and fracture mechanisms reminiscent of mineralized biological composites. This complementary computational model predictions of fracture mechanisms and trends in mechanical properties are in good agreement with the experimental findings. The reported findings confirm that specific topological arrangements of soft and stiff phases as a design mechanism enhances the mechanical behavior in composites. This study demonstrates 3D printing as a means to create fracture resistant composites. Moreover, these results indicate that one can use computer models to design composite materials to exhibit tailored fracture properties and then use 3D printing to synthesize materials with such mechanical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Self-assembly of DNA into nanoscale three-dimensional shapes
Douglas, S. M., Dietz, H., Liedl, T., Högberg, B., Graf, F., & Shih, W. M. (2009) · Nature · doi:10.1038/nature08016 · Cited by 2,571
Bioinspired Surfaces with Special Wettability
Sun, T., Feng, L., Gao, X., & Jiang, L. (2005) · Accounts of Chemical Research · doi:10.1021/ar040224c · Cited by 2,044
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
Structure and mechanical quality of the collagen–mineral nano-composite in bone
Fratzl, P., Gupta, H. S., Paschalis, E. P., & Roschger, P. (2004) · J. Mater. Chem. · doi:10.1039/b402005g · Cited by 1,222
Skeleton of Euplectella sp.: Structural Hierarchy from the Nanoscale to the Macroscale
Aizenberg, J., Weaver, J. C., Thanawala, M. S., Sundar, V. C., Morse, D. E., & Fratzl, P. (2005) · Science · doi:10.1126/science.1112255 · Cited by 1,144
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Metadata
- Authors
- Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2013-06-17
- Volume
- 23
- Issue
- 36
- Pages
- 4629-4638
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2030977129
- Cited by
- 385
- References
- 33
- FWCI
- 8.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing. https://app.cochat.ai/papers/10.1002/adfm.201300215
- The paper
- Dimas, L. S., Bratzel, G. H., Eylon, I., & Buehler, M. J. (2013). Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing. Advanced Functional Materials. https://doi.org/10.1002/adfm.201300215
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.