The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Structured Reduced Graphene Oxide/Polymer Composites for Ultra‐Efficient Electromagnetic Interference Shielding
Abstract
A high‐performance electromagnetic interference shielding composite based on reduced graphene oxide (rGO) and polystyrene (PS) is realized via high‐pressure solid‐phase compression molding. Superior shielding effectiveness of 45.1 dB, the highest value among rGO based polymer composite, is achieved with only 3.47 vol% rGO loading owning to multi‐facet segregated architecture with rGO selectively located on the boundaries among PS multi‐facets. This special architecture not only provides many interfaces to absorb the electromagnetic waves, but also dramatically reduces the loading of rGO by confining the rGO at the interfaces. Moreover, the mechanical strength of the segregated composite is dramatically enhanced using high pressure at 350 MPa, overcoming the major disadvantage of the composite made by conventional‐pressure (5 MPa). The composite prepared by the higher pressure shows 94% and 40% increment in compressive strength and compressive modulus, respectively. These results demonstrate a promising method to fabricate an economical, robust, and highly efficient EMI shielding material.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Chen, Z., Xu, C., Ma, C., Ren, W., & Cheng, H. (2013) · Advanced Materials · doi:10.1002/adma.201204196 · Cited by 1,986
Electromagnetic interference shielding of graphene/epoxy composites
Liang, J., Wang, Y., Huang, Y., Ma, Y., Liu, Z., Cai, J., Zhang, C., Gao, H., & Chen, Y. (2009) · Carbon · doi:10.1016/j.carbon.2008.12.038 · Cited by 1,334
Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials
Thomassin, J.-M., Jérôme, C., Pardoen, T., Bailly, C., Huynen, I., & Detrembleur, C. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.06.001 · Cited by 1,228
Tough Graphene−Polymer Microcellular Foams for Electromagnetic Interference Shielding
Zhang, H.-B., Yan, Q., Zheng, W.-G., He, Z., & Yu, Z.-Z. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200021v · Cited by 1,096
Ling, J., Zhai, W., Feng, W., Shen, B., Zhang, J., & Zheng, W. G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am303289m · Cited by 771
Shen, B., Zhai, W., Tao, M., Ling, J., & Zheng, W. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4036527 · Cited by 629
Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite
Yan, D.-X., Ren, P.-G., Pang, H., Fu, Q., Yang, M.-B., & Li, Z.-M. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32692b · Cited by 589
Self-citationTunneling and nonuniversal conductivity in composite materials
Balberg, I. (1987) · Physical Review Letters · doi:10.1103/physrevlett.59.1305 · Cited by 547
Developing Polymer Composite Materials: Carbon Nanotubes or Graphene?
Sun, X., Sun, H., Li, H., & Peng, H. (2013) · Advanced Materials · doi:10.1002/adma.201301926 · Cited by 495
Highly Conductive Multifunctional Graphene Polycarbonate Nanocomposites
Yoonessi, M., & Gaier, J. R. (2010) · ACS Nano · doi:10.1021/nn1019626 · Cited by 335
Zhang, H.-B., Zheng, W.-G., Yan, Q., Jiang, Z.-G., & Yu, Z.-Z. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.052 · Cited by 332
An electrically conducting polymer/graphene composite with a very low percolation threshold
Pang, H., Chen, T., Zhang, G., Zeng, B., & Li, Z.-M. (2010) · Materials Letters · doi:10.1016/j.matlet.2010.07.001 · Cited by 306
Self-citationHsiao, S.-T., Ma, C.-C. M., Tien, H.-W., Liao, W.-H., Wang, Y.-S., Li, S.-M., & Huang, Y.-C. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.056 · Cited by 298
Zhan, Y., Lavorgna, M., Buonocore, G., & Xia, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31293j · Cited by 287
Gelves, G. A., Al-Saleh, M. H., & Sundararaj, U. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02546a · Cited by 278
Enhanced Electrical Conductivity in Polystyrene Nanocomposites at Ultra-Low Graphene Content
Qi, X.-Y., Yan, D., Jiang, Z., Cao, Y.-K., Yu, Z.-Z., Yavari, F., & Koratkar, N. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200628c · Cited by 273
Self-citationPham, V. H., Dang, T. T., Hur, S. H., Kim, E. J., & Chung, J. S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300297j · Cited by 265
Singh, A. P., Garg, P., Alam, F., Singh, K., Mathur, R. B., Tandon, R. P., Chandra, A., & Dhawan, S. K. (2012) · Carbon · doi:10.1016/j.carbon.2012.04.030 · Cited by 257
Wu, C., Huang, X., Wang, G., Lv, L., Chen, G., Li, G., & Jiang, P. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201231 · Cited by 229
Controlling electrical percolation in multicomponent carbon nanotube dispersions
Kyrylyuk, A. V., Hermant, M. C., Schilling, T., Klumperman, B., Koning, C. E., & van der Schoot, P. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.40 · Cited by 207
Heaney, M. B. (1995) · Physical Review B · doi:10.1103/physrevb.52.12477 · Cited by 181
Jurewicz, I., Worajittiphon, P., King, A. A. K., Sellin, P. J., Keddie, J. L., & Dalton, A. Β. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp111998p · Cited by 102
Shrivastava, N. K., & Khatua, B. B. (2011) · Carbon · doi:10.1016/j.carbon.2011.06.070 · Cited by 92
Ou, R., Gupta, S., Parker, C. A., & Gerhardt, R. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp064498o · Cited by 89
Moriarty, G. P., Whittemore, J. H., Sun, K. A., Rawlins, J. W., & Grunlan, J. C. (2011) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.22344 · Cited by 32
Cited by
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Anomalous absorption of electromagnetic waves by 2D transition metal carbonitride Ti 3 CNT x (MXene)
Iqbal, A., Shahzad, F., Hantanasirisakul, K., Kim, M.-K., Kwon, J., Hong, J., Kim, H., Kim, D., Gogotsi, Y., & Koo, C. M. (2020) · Science · doi:10.1126/science.aba7977 · Cited by 1,511
Dimensional Design and Core–Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption
Wu, Z., Cheng, H., Jin, C., Yang, B., Xu, C., Pei, K., Zhang, H., Yang, Z., & Che, R. (2022) · Advanced Materials · doi:10.1002/adma.202107538 · Cited by 1,059
Han, M., Yin, X., Wu, H., Hou, Z., Song, C., Li, X., Zhang, L., & Cheng, L. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06455 · Cited by 996
Cao, M.-S., Cai, Y.-Z., He, P., Shu, J.-C., Cao, W.-Q., & Yuan, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.051 · Cited by 979
Metadata
- Authors
- Yan, D., Pang, H., Li, B., Vajtai, R., Xu, L., Ren, P., Wang, J., & Li, Z.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2014-12-02
- Volume
- 25
- Issue
- 4
- Pages
- 559-566
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2099848957
- Cited by
- 1,194
- References
- 28
- FWCI
- 18.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.