The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization
Abstract
Silica aerogels are amongst the lightest mesoporous solids known and well recognized for their superinsulating properties, but the weak mechanical properties of the inorganic network structure has often narrowed their field of application. Here, the inherent brittleness of dried inorganic gels is tackled through the elaboration of a strong mesoporous silica aerogel interpenetrated with a silylated nanocellulosic scaffold. To this avail, a functionalized scaffold is synthesized by freeze‐drying an aqueous suspension of nanofibrillated cellulose (NFC)—a bio‐based nanomaterial mechanically isolated from renewable resources—in the presence of methyltrimethoxysilane sol. The silylated NFC scaffold displays a high porosity (>98%), high flexibility, and reduced thermal conductivity (λ) compared with classical cellulosic structures. The polysiloxane layer decorating the nanocellulosic scaffold is exploited to promote the attachment of the mesoporous silica matrix onto the nanofibrillated cellulose scaffold (NFCS), leading to a reinforced silica hybrid aerogel with improved thermomechanical properties. The highly porous (>93%) silica‐NFC hybrids displays meso‐ and macroporosity with pore diameters controllable by the NFCS mass fraction, reduced linear shrinkage, improved compressive properties (55% and 126% increase in Young's modulus and tensile strength, respectively), while maintaining superinsulating properties (λ ≤ 20 mW (m K)–1). This study details a new direction for the synthesis of multiscale hybrid silica aerogel structures with tailored properties through the use of alkyltrialkoxysilane prefunctionalized nanocellulosic scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microfibrillated cellulose and new nanocomposite materials: a review
Siró, I., & Plackett, D. (2010) · Cellulose · doi:10.1007/s10570-010-9405-y · Cited by 2,883
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Coherent Expanded Aerogels and Jellies
KISTLER, S. S. (1931) · Nature · doi:10.1038/127741a0 · Cited by 2,103
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Self-citationCellulose fibrils for polymer reinforcement
Zimmermann, T., Pöhler, E., & Geiger, T. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200400097 · Cited by 598
(2011) · Springer eBooks · doi:10.1007/978-1-4419-7589-8 · Cited by 576
Hrubesh, L. W. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00135-5 · Cited by 572
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Li, Y., Liu, X., Nie, X., Yang, W., Wang, Y., Yu, R., & Shui, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807624 · Cited by 850
Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications
Zhao, S., Malfait, W. J., Guerrero‐Alburquerque, N., Koebel, M. M., & Nyström, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709014 · Cited by 755
Self-citationChen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
New insights and perspectives into biological materials for flexible electronics
Wang, L., Chen, D., Jiang, K., & Shen, G. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00278e · Cited by 410
Thermally Insulating Nanocellulose‐Based Materials
Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2021) · Advanced Materials · doi:10.1002/adma.202001839 · Cited by 394
Synthesis and biomedical applications of aerogels: Possibilities and challenges
Maleki, H., Durães, L., García-González, C. A., del Gaudio, P., Portugal, A., & Mahmoudi, M. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.011 · Cited by 386
Zhang, X., Zhao, X., Xue, T., Yang, F., Fan, W., & Liu, T. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123963 · Cited by 368
Linhares, T., Pessoa de Amorim, M. T., & Durães, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04811a · Cited by 366
Ultralight, scalable, and high-temperature–resilient ceramic nanofiber sponges
Wang, H., Zhang, X., Wang, N., Li, Y., Feng, X., Huang, Y., Zhao, C., Liu, Z., Fang, M., Ou, G., et al. (2017) · Science Advances · doi:10.1126/sciadv.1603170 · Cited by 332
Yu, Z.-L., Yang, N., Zhou, L.-C., Ma, Z.-Y., Zhu, Y.-B., Lu, Y.-Y., Qin, B., Xing, W.-Y., Ma, T., Li, S.-C., et al. (2018) · Science Advances · doi:10.1126/sciadv.aat7223 · Cited by 310
Zhang, X., Wang, F., Dou, L., Cheng, X., Si, Y., Yu, J., & Ding, B. (2020) · ACS Nano · doi:10.1021/acsnano.0c06423 · Cited by 300
Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review
Ahankari, S., Paliwal, P., Subhedar, A., & Kargarzadeh, H. (2021) · ACS Nano · doi:10.1021/acsnano.0c09678 · Cited by 281
Low density and high strength nanofibrillated cellulose aerogel for thermal insulation application
Gupta, P., Singh, B., Agrawal, A. K., & Maji, P. K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.031 · Cited by 262
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Silica Centered Aerogels as Advanced Functional Material and Their Applications: A Review
Ahmad, S., Ahmad, S., & Sheikh, J. N. (2023) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2023.122322 · Cited by 97
Metadata
- Authors
- Zhao, S., Zhang, Z., Sèbe, G., Wu, R., Rivera Virtudazo, R. V., Tingaut, P., & Koebel, M. M.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-03-16
- Volume
- 25
- Issue
- 15
- Pages
- 2326-2334
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2032882264
- Cited by
- 307
- References
- 42
- FWCI
- 12.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.