Formation and Movement of Cationic Defects During Forming and Resistive Switching in SrTiO3 Thin Film Devices
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The resistance switching phenomenon in many transition metal oxides is described by ion motion leading to the formation of oxygen‐deficient, highly electron‐doped filaments. In this paper, the interface and subinterface region of electroformed and switched metal–insulator–metal structures fabricated from a thin Fe‐doped SrTiO 3 (STO) film on n‐conducting Nb‐doped SrTiO 3 crystals are investigated by photoemission electron microscopy, transmission electron microscopy, and hard X‐ray photoelectron spectroscopy in order to gain a deeper understanding of cation movement in this specific system. During electroforming, the segregation of Sr to the top interface and the generation of defect‐rich cones in the film are observed, apparently growing from the anode toward the cathode during electroforming. An unusual binding energy component of the Sr 3d emission line is observed which can be assigned to defect complexes by performing ab initio calculations. Since this Sr component can be reversibly affected by an external electrical bias, the movement of both oxygen and Sr point defects and the formation of defect complexes during resistive switching are suggested. These findings are discussed with regard to the point defect structure of the film and the local oxidation of the donor‐doped substrate. In particular, the apparent dichotomy between the observation of acceptor‐type defects and increased electronic conductivity in STO is addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Self-citationNanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Self-citationOrigin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches
Menzel, S., Waters, M., Marchewka, A., Böttger, U., Dittmann, R., & Waser, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101117 · Cited by 348
Self-citation
Cited by
Li, Y., Zhang, W., Zheng, Y., Chen, J., Yu, B., Chen, Y., & Liu, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00120g · Cited by 376
Robust Ag/ZrO 2 /WS 2 /Pt Memristor for Neuromorphic Computing
Yan, X., Qin, C., Lu, C., Zhao, J., Zhao, R., Ren, D., Zhou, Z., Wang, H., Wang, J., Zhang, L., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17160 · Cited by 217
Kwon, J. U., Song, Y. G., Kim, J. E., Chun, S. Y., Kim, G. H., Noh, G., Kwak, J. Y., Hur, S., Kang, C.-Y., Jeong, D. S., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c12247 · Cited by 44
Programmable, electroforming-free TiO x /TaO x heterojunction-based non-volatile memory devices
Srivastava, S., Thomas, J. P., & Leung, K. T. (2019) · Nanoscale · doi:10.1039/c9nr06403f · Cited by 27
Metadata
- Authors
- Lenser, C., Koehl, A., Slipukhina, I., Du, H., Patt, M., Feyer, V., Schneider, C. M., Lezaic, M., Waser, R., & Dittmann, R.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-05-18
- Volume
- 25
- Issue
- 40
- Pages
- 6360-6368
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1898939874
- Cited by
- 66
- References
- 4
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Formation and Movement of Cationic Defects During Forming and Resistive Switching in SrTiO3 Thin Film Devices. https://app.cochat.ai/papers/10.1002/adfm.201500851
- The paper
- Lenser, C., Koehl, A., Slipukhina, I., Du, H., Patt, M., Feyer, V., Schneider, C. M., Lezaic, M., Waser, R., & Dittmann, R. (2015). Formation and Movement of Cationic Defects During Forming and Resistive Switching in SrTiO3 Thin Film Devices. Advanced Functional Materials. https://doi.org/10.1002/adfm.201500851
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.