The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Engineering Solar Cell Absorbers by Exploring the Band Alignment and Defect Disparity: The Case of Cu‐ and Ag‐Based Kesterite Compounds
Abstract
The development of kesterite Cu 2 ZnSn(S,Se)4 thin‐film solar cells is currently hindered by the large deficit of open‐circuit voltage (Voc), which results from the easy formation of Cu Zn antisite acceptor defects. Suppressing the formation of Cu Zn defects, especially near the absorber/buffer interface, is thus critical for the further improvement of kesterite solar cells. In this paper, it is shown that there is a large disparity between the defects in Cu‐ and Ag‐based kesterite semiconductors, i.e., the Cu Zn or Cu Cd acceptor defects have high concentration and are the dominant defects in Cu 2 ZnSn(S,Se)4 or Cu 2 CdSnS 4, but the Ag Zn acceptor has only a low concentration and the dominant defects are donors in Ag 2 ZnSnS 4. Therefore, the Cu‐based kesterites always show p‐type conductivity, while the Ag‐based kesterites show either intrinsic or weak n‐type conductivity. Based on this defect disparity and calculated band alignment, it is proposed that the Voc limit of the kesterite solar cells can be overcome by alloying Cu 2 ZnSn(S,Se)4 with Ag 2 ZnSn(S,Se)4, and the composition‐graded (Cu,Ag)2 ZnSn(S,Se)4 alloys should be ideal light‐absorber materials for achieving higher efficiency kesterite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency
Wang, W., Winkler, M. T., Gunawan, O., Gokmen, T., Todorov, T. K., Zhu, Y., & Mitzi, D. B. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301465 · Cited by 3,183
Solar cell efficiency tables (Version 45)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2573 · Cited by 2,440
Defect physics of theCuInSe2chalcopyrite semiconductor
Zhang, S. B., Wei, S.-H., Zunger, A., & Katayama-Yoshida, H. (1998) · Physical Review B · doi:10.1103/physrevb.57.9642 · Cited by 1,407
Self-citationLany, S., & Zunger, A. (2008) · Physical Review B · doi:10.1103/physrevb.78.235104 · Cited by 1,257
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
Development of CZTS-based thin film solar cells
Katagiri, H., Jimbo, K., Maw, W. S., Oishi, K., Yamazaki, M., Araki, H., & Takeuchi, A. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.11.002 · Cited by 1,124
Materials interface engineering for solution-processed photovoltaics
Graetzel, M., Janssen, R. A. J., Mitzi, D. B., & Sargent, E. H. (2012) · Nature · doi:10.1038/nature11476 · Cited by 1,112
Cited by
Yan, C., Huang, J., Sun, K., Johnston, S., Zhang, Y., Sun, H., Pu, A., He, M., Liu, F., Eder, K., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0206-0 · Cited by 861
Self-citationProgress and Perspectives of Thin Film Kesterite Photovoltaic Technology: A Critical Review
Giraldo, S., Jehl, Z., Placidi, M., Izquierdo‐Roca, V., Pérez‐Rodríguez, A., & Saucedo, E. (2019) · Advanced Materials · doi:10.1002/adma.201806692 · Cited by 464
Defect Engineering in Multinary Earth‐Abundant Chalcogenide Photovoltaic Materials
Shin, D., Saparov, B., & Mitzi, D. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602366 · Cited by 357
Metadata
- Authors
- Yuan, Z., Chen, S., Xiang, H., Gong, X., Walsh, A., Park, J., Repins, I., & Wei, S.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2015-10-19
- Volume
- 25
- Issue
- 43
- Pages
- 6733-6743
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2152237787
- Cited by
- 370
- References
- 38
- FWCI
- 12.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Engineering Solar Cell Absorbers by Exploring the Band Alignment and Defect Disparity: The Case of Cu‐ and Ag‐Based Kesterite Compounds. https://app.cochat.ai/papers/10.1002/adfm.201502272
- The paper
- Yuan, Z., Chen, S., Xiang, H., Gong, X., Walsh, A., Park, J., Repins, I., & Wei, S. (2015). Engineering Solar Cell Absorbers by Exploring the Band Alignment and Defect Disparity: The Case of Cu‐ and Ag‐Based Kesterite Compounds. Advanced Functional Materials. https://doi.org/10.1002/adfm.201502272
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.