The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Enhanced Stability of Perovskite Solar Cells with Low‐Temperature Hydrothermally Grown SnO2 Electron Transport Layers
Abstract
Perovskite solar cells (PSCs) may offer huge potential in photovoltaic conversion, yet their practical applications face one major obstacle: their low stability, or quick degradation of their initial efficiencies. Here, a new design scheme is presented to enhance the PSC stability by using low‐temperature hydrothermally grown hierarchical nano‐SnO 2 electron transport layers (ETLs). The ETL contains a thin compact SnO 2 layer underneath a mesoporous layer of SnO 2 nanosheets. The mesoporous layer plays multiple roles of enhancing photon collection, preventing moisture penetration and improving the long‐term stability. Through such simple approaches, PSCs with power conversion efficiencies of ≈13% can be readily obtained, with the highest efficiency to be 16.17%. A prototypical PSC preserves 90% of its initial efficiency even after storage in air at room temperature for 130 d without encapsulation. This study demonstrates that hierarchical SnO 2 is a potential ETL for fabricating low‐cost and efficient PSCs with long‐term stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Jiang, Q., Zhang, X., & You, J. (2018) · Small · doi:10.1002/smll.201801154 · Cited by 924
Review on the Application of SnO2 in Perovskite Solar Cells
Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802757 · Cited by 653
Self-citationImpact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Tin oxide for optoelectronic, photovoltaic and energy storage devices: a review
Dalapati, G. K., Sharma, H., Guchhait, A., Chakrabarty, N., Bamola, P., Liu, Q., Saianand, G., Sai Krishna, A. M., Mukhopadhyay, S., Dey, A., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta01291f · Cited by 406
Self-citationTin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Metadata
- Authors
- Liu, Q., Qin, M., Ke, W., Zheng, X., Chen, Z., Qin, P., Xiong, L., Lei, H., Wan, J., Wen, J., Yang, G., Ma, J., Zhang, Z., & Fang, G.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2016-06-20
- Volume
- 26
- Issue
- 33
- Pages
- 6069-6075
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2460428017
- Cited by
- 176
- References
- 1
- FWCI
- 12.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced Stability of Perovskite Solar Cells with Low‐Temperature Hydrothermally Grown SnO2 Electron Transport Layers. https://app.cochat.ai/papers/10.1002/adfm.201600910
- The paper
- Liu, Q., Qin, M., Ke, W., Zheng, X., Chen, Z., Qin, P., Xiong, L., Lei, H., Wan, J., Wen, J., Yang, G., Ma, J., Zhang, Z., & Fang, G. (2016). Enhanced Stability of Perovskite Solar Cells with Low‐Temperature Hydrothermally Grown SnO2 Electron Transport Layers. Advanced Functional Materials. https://doi.org/10.1002/adfm.201600910
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.