The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Review on the Application of SnO2 in Perovskite Solar Cells
Abstract
SnO 2 has been well investigated in many successful state‐of‐the‐art perovskite solar cells (PSCs) due to its favorable attributes such as high mobility, wide bandgap, and deep conduction band and valence band. Several independent studies show the performances of PSCs with SnO 2 are higher than that with TiO 2, especially in device stability. In 2015, the first planar PSCs were reported with a power conversion efficiency over 17% using a low temperature sol‐derived SnO 2 nanocrystal electron transport layer (ETL). Since then, many other groups have also reported high performance PSCs based on SnO 2 ETLs. SnO 2 planar PSCs show currently the highest performance in planar configuration devices (21.6%) and are close to the record holder of TiO 2 mesoporous PSCs, suggesting their high potential as ETLs in PSCs. The main concerns with the application of SnO 2 as ETL are that it suffers from degradation in high temperature processes and that its much lower conduction band compared to perovskite may result in a voltage loss of PSCs. Here, notable achievements to date are outlined, the unique attributes of SnO 2 as ETLs in PSCs are described, and the challenges facing the successful development of PSCs and approaches to the problems are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Cited by
Tin oxide for optoelectronic, photovoltaic and energy storage devices: a review
Dalapati, G. K., Sharma, H., Guchhait, A., Chakrabarty, N., Bamola, P., Liu, Q., Saianand, G., Sai Krishna, A. M., Mukhopadhyay, S., Dey, A., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta01291f · Cited by 406
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Hui, W., Yang, Y., Xu, Q., Gu, H., Feng, S., Su, Z., Zhang, M., Wang, J., Li, X., Fang, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201906374 · Cited by 316
Metadata
- Authors
- Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-07-20
- Volume
- 28
- Issue
- 35
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2884081437
- Cited by
- 653
- References
- 102
- FWCI
- 22.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review on the Application of SnO2 in Perovskite Solar Cells. https://app.cochat.ai/papers/10.1002/adfm.201802757
- The paper
- Xiong, L., Guo, Y., Wen, J., Liu, H., Yang, G., Qin, P., & Fang, G. (2018). Review on the Application of SnO2 in Perovskite Solar Cells. Advanced Functional Materials. https://doi.org/10.1002/adfm.201802757
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.