Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
3D printing of renewable building blocks like cellulose nanocrystals offers an attractive pathway for fabricating sustainable structures. Here, viscoelastic inks composed of anisotropic cellulose nanocrystals (CNC) that enable patterning of 3D objects by direct ink writing are designed and formulated. These concentrated inks are composed of CNC particles suspended in either water or a photopolymerizable monomer solution. The shear‐induced alignment of these anisotropic building blocks during printing is quantified by atomic force microscopy, polarized light microscopy, and 2D wide‐angle X‐ray scattering measurements. Akin to the microreinforcing effect in plant cell walls, the alignment of CNC particles during direct writing yields textured composites with enhanced stiffness along the printing direction. The observations serve as an important step forward toward the development of sustainable materials for 3D printing of cellular architectures with tailored mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [37]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Self-citationBeck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Self-citationLiquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672
Introduction to the principles of ceramic processing
Laughner, J. W. (1989) · Materials Science and Engineering: A · doi:10.1016/0921-5093(89)90869-1 · Cited by 466
New Nanocomposite Materials Reinforced with Flax Cellulose Nanocrystals in Waterborne Polyurethane
Cao, X., Dong, H., & Li, C. M. (2007) · Biomacromolecules · doi:10.1021/bm0610368 · Cited by 462
Nanocellulose: From Nature to High Performance Tailored Materials
Dufresne, A. (2012) · De Gruyter eBooks · doi:10.1515/9783110254600 · Cited by 420
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Self-citationMorandi, G., Heath, L., & Thielemans, W. (2009) · Langmuir · doi:10.1021/la900452a · Cited by 405
Preparation of homogeneous dispersions of tunicate cellulose whiskers in organic solvents
van den Berg, O., Capadona, J. R., & Weder, C. (2007) · Biomacromolecules · doi:10.1021/bm061104q · Cited by 278
Orientation of cellulose microcrystals by strong magnetic fields
Sugiyama, J., Chanzy, H., & Maret, G. (1992) · Macromolecules · doi:10.1021/ma00042a032 · Cited by 254
Torres‐Rendon, J. G., Femmer, T., De Laporte, L., Tigges, T., Rahimi, K., Gremse, F., Zafarnia, S., Lederle, W., Ifuku, S., Wessling, M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405873 · Cited by 226
Orientation of Native Cellulose in an Electric Field
Bordel, D., Putaux, J.-L., & Heux, L. (2006) · Langmuir · doi:10.1021/la0600402 · Cited by 197
Cellulose Microcrystal Film of High Uniaxial Orientation
Yoshiharu, N., Shigenori, K., Masahisa, W., & Takeshi, O. (1997) · Macromolecules · doi:10.1021/ma970503y · Cited by 193
Thermal Expansion of Self-Organized and Shear-Oriented Cellulose Nanocrystal Films
Diaz, J. A., Wu, X., Martini, A., Youngblood, J. P., & Moon, R. J. (2013) · Biomacromolecules · doi:10.1021/bm400794e · Cited by 169
Bendahou, A., Habibi, Y., Kaddami, H., & Dufresne, A. (2009) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2009.1011 · Cited by 165
Chen, S., Schueneman, G., Pipes, R. B., Youngblood, J. P., & Moon, R. J. (2014) · Biomacromolecules · doi:10.1021/bm501161v · Cited by 118
Pullawan, T., Wilkinson, A. N., & Eichhorn, S. J. (2012) · Biomacromolecules · doi:10.1021/bm300746r · Cited by 117
Phase Behavior and Rheological Properties of Polyelectrolyte Inks for Direct-Write Assembly
Gratson, G. M., & Lewis, J. A. (2004) · Langmuir · doi:10.1021/la048228d · Cited by 97
Self-citationBioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Wang, B., Benítez, A., Lossada, F., Merindol, R., & Walther, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511512 · Cited by 79
Herrera, N., Mathew, A. P., Wang, L. Y., & Oksman, K. (2011) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/174328911x12988622800891 · Cited by 36
Gelling of cellulose nanowhiskers in aqueous suspension
Goff, K. J. L., Jouanneau, D., Garnier, C., & Aubry, T. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40676 · Cited by 13
Cellulose Whisker/Epoxy Resin Nanocomposites
Tang, L., & Weder, C. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100954n · Cited by 13
Research works printed but not linked: 1
- Favier V., 1995, Abstr. Pap. Am. Chem. Soc., 209, 29
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Mujtaba, M., Fernandes Fraceto, L., Fazeli, M., Mukherjee, S., Savassa, S. M., Araujo de Medeiros, G., do Espírito Santo Pereira, A., Mancini, S. D., Lipponen, J., & Vilaplana, F. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136815 · Cited by 1,192
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Metadata
- Authors
- Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R.
- Affiliations
- Empa (CH)
- ETH Zurich (CH)
- Harvard University (US)
- Corresponding author
- Zimmermann, Tanja
- Lewis, Jennifer A.
- Studart, André R.
- ORCID
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-02-07
- Volume
- 27
- Issue
- 12
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2587752517
- Cited by
- 580
- References
- 29
- Citations by year
- 2026: 20 · 2025: 48 · 2024: 61 · 2023: 69 · 2022: 71 · 2021: 84 · 2020: 71 · 2019: 73 · 2018: 58 · 2017: 24
- FWCI
- 22.24
- Type
- journal article
- Language
- en
- Open access
- green
- www.dora.lib4ri.ch
- Licence
- Locations
- Advanced Functional Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion, other-oa)
- Repository for Publications and Research Data (ETH Zurich) (submittedVersion, other-oa)
- ETH Zürich Research Collection
- Funders
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (200021‐159906/1)
- Air Force Office of Scientific Research (FA9550‐16‐1‐0007)
- Kompetenzzentrum für Energie und Mobilität
- Army Research Office (W911NF‐13‐0489)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- cellulose nanocrystals, 3D printing inks, direct ink writing, anisotropic particles, shear alignment, photopolymerizable monomers, anisotropic stiffness, sustainable materials, cellular architecture
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.