Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Open accessThe DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
3D printing of renewable building blocks like cellulose nanocrystals offers an attractive pathway for fabricating sustainable structures. Here, viscoelastic inks composed of anisotropic cellulose nanocrystals (CNC) that enable patterning of 3D objects by direct ink writing are designed and formulated. These concentrated inks are composed of CNC particles suspended in either water or a photopolymerizable monomer solution. The shear‐induced alignment of these anisotropic building blocks during printing is quantified by atomic force microscopy, polarized light microscopy, and 2D wide‐angle X‐ray scattering measurements. Akin to the microreinforcing effect in plant cell walls, the alignment of CNC particles during direct writing yields textured composites with enhanced stiffness along the printing direction. The observations serve as an important step forward toward the development of sustainable materials for 3D printing of cellular architectures with tailored mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“In contrast to cellulose nanofiber and carbon nanotubes, previously used in inks 36–38, fibronectin-coated gelatin fibers contain arginine–glycine–aspartic (RGD) acid peptide binding domains that promote matrix-cell adhesion through integrins39.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [37]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citation3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Self-citationBeck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Self-citationLiquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A. (2008) · Journal of Materials Chemistry · doi:10.1039/b809212e · Cited by 672
Research works printed but not linked: 1
- Favier V., 1995, Abstr. Pap. Am. Chem. Soc., 209, 29
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Mujtaba, M., Fernandes Fraceto, L., Fazeli, M., Mukherjee, S., Savassa, S. M., Araujo de Medeiros, G., do Espírito Santo Pereira, A., Mancini, S. D., Lipponen, J., & Vilaplana, F. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136815 · Cited by 1,192
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Nanofibrils in nature and materials engineering
Ling, S., Kaplan, D. L., & Buehler, M. J. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.16 · Cited by 730
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Self-citationHemicellulose: Structure, chemical modification, and application
Rao, J., Lv, Z., Chen, G., & Peng, F. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101675 · Cited by 508
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
From Shape to Function: The Next Step in Bioprinting
Levato, R., Jungst, T., Scheuring, R. G., Blunk, T., Groll, J., & Malda, J. (2020) · Advanced Materials · doi:10.1002/adma.201906423 · Cited by 476
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Surface nanogrooving of carbon microtubes
Nasri-Nasrabadi, B., Kaynak, A., Komeily-Nia, Z., Adams, S. D., Li, J., & Kouzani, A. Z. (2018) · Scientific Reports · doi:10.1038/s41598-018-28313-0 · Cited by 393
Synthesis and applications of anisotropic nanoparticles with precisely defined dimensions
Pearce, A. K., Wilks, T. R., Arno, M. C., & O’Reilly, R. K. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-020-00232-7 · Cited by 389
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels
Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm-Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 347
3D printing technologies: techniques, materials, and post-processing
Karakurt, I., & Lin, L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.001 · Cited by 346
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., et al. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101078 · Cited by 337
3D printing with cellulose materials
Wang, Q., Sun, J., Yao, Q., Ji, C., Liu, J., & Zhu, Q. (2018) · Cellulose · doi:10.1007/s10570-018-1888-y · Cited by 324
Rheology of nanocellulose-rich aqueous suspensions: A Review
Hubbe, M. A., Tayeb, P., Joyce, M., Tyagi, P., Kehoe, M., Dimic-Misic, K., & Pal, L. (2017) · BioResources · doi:10.15376/biores.12.4.hubbe · Cited by 289
De France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Self-citation3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Nanocellulose Processing Properties and Potential Applications
Dufresne, A. (2019) · Current Forestry Reports · doi:10.1007/s40725-019-00088-1 · Cited by 279
Xiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Nguyen, D. T., Meyers, C., Yee, T. D., Dudukovic, N. A., Destino, J. F., Zhu, C., Duoss, E. B., Baumann, T. F., Suratwala, T., Smay, J. E., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701181 · Cited by 273
Frey, M., Widner, D., Segmehl, J. S., Casdorff, K., Keplinger, T., & Burgert, I. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18646 · Cited by 271
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Functionalized Cellulose for Water Purification, Antimicrobial Applications, and Sensors
Bethke, K., Palantöken, S., Andrei, V., Roß, M., Raghuwanshi, V. S., Kettemann, F., Greis, K., Ingber, T. T. K., Stückrath, J. B., Valiyaveettil, S., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800409 · Cited by 269
Acoustic Holographic Cell Patterning in a Biocompatible Hydrogel
Ma, Z., Holle, A. W., Melde, K., Qiu, T., Poeppel, K., Kadiri, V. M., & Fischer, P. (2020) · Advanced Materials · doi:10.1002/adma.201904181 · Cited by 269
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jang, J., Park, J. Y., Gao, G., & Cho, D.-W. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254
Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Valorisation of lignocellulosic biomass: a new generation in biorefinery and biomaterials
Pandey, A., Verma, N., Jain, S., Bose, S. K., & Yadava, P. (2025) · Biotechnology for Sustainable Materials · doi:10.1186/s44316-025-00042-1 · Cited by 19
Metadata
- Authors
- Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R.
- Affiliations
- Empa (CH)
- ETH Zurich (CH)
- Harvard University (US)
- Corresponding author
- Zimmermann, Tanja
- Lewis, Jennifer A.
- Studart, André R.
- ORCID
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-02-07
- Volume
- 27
- Issue
- 12
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2587752517
- Cited by
- 580
- References
- 29
- Citations by year
- 2026: 20 · 2025: 48 · 2024: 61 · 2023: 69 · 2022: 71 · 2021: 84 · 2020: 71 · 2019: 73 · 2018: 58 · 2017: 24
- FWCI
- 22.24
- Type
- journal article
- Language
- en
- Open access
- green
- www.dora.lib4ri.ch
- Licence
- Locations
- Advanced Functional Materials (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion, other-oa)
- Repository for Publications and Research Data (ETH Zurich) (submittedVersion, other-oa)
- ETH Zürich Research Collection
- Funders
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (200021‐159906/1)
- Air Force Office of Scientific Research (FA9550‐16‐1‐0007)
- Kompetenzzentrum für Energie und Mobilität
- Army Research Office (W911NF‐13‐0489)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Keywords
- cellulose nanocrystals, 3D printing inks, direct ink writing, anisotropic particles, shear alignment, photopolymerizable monomers, anisotropic stiffness, sustainable materials, cellular architecture
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.