Novel Direct Nanopatterning Approach to Fabricate Periodically Nanostructured Perovskite for Optoelectronic Applications
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
While indirectly patterned organic–inorganic hybrid perovskite nanostructures have been extensively studied for use in perovskite optoelectronic devices, it is still challenging to directly pattern perovskite thin films because perovskite is very sensitive to polar solvents and high‐temperature environments. Here, a simple and low‐cost approach is proposed to directly pattern perovskite solid‐state films into periodic nanostructures. The approach is basically perovskite recrystallization through phase transformation with the presence of a periodic mold on an as‐prepared solid‐state perovskite film. Interestingly, this study simultaneously achieves not only periodically patterned perovskite nanostructures but also better crystallized perovskites and improved optical properties, as compared to its thin film counterpart. The improved optical properties can be attributed to the light extraction and increased spontaneous emission rate of perovskite gratings. By fabricating light‐emitting diodes using the periodic perovskite nanostructure as the emission layers, approximately twofold higher radiance and lower threshold than the reference planar devices are achieved. This work opens up a new and simple way to fabricate highly crystalline and large‐area perovskite periodic nanostructures for low‐cost production of high‐performance optoelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Lead iodide perovskite light-emitting field-effect transistor
Chin, X. Y., Cortecchia, D., Yin, J., Bruno, A., & Soci, C. (2015) · Nature Communications · doi:10.1038/ncomms8383 · Cited by 767
Structured Organic–Inorganic Perovskite toward a Distributed Feedback Laser
Saliba, M., Wood, S. M., Patel, J. B., Nayak, P. K., Huang, J., Alexander‐Webber, J. A., Wenger, B., Stranks, S. D., Hörantner, M. T., Wang, J. T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201502608 · Cited by 297
Diode-Pumped Organo-Lead Halide Perovskite Lasing in a Metal-Clad Distributed Feedback Resonator
Jia, Y., Kerner, R. A., Grede, A. J., Brigeman, A. N., Rand, B. P., & Giebink, N. C. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01946 · Cited by 216
Cited by
Zhang, Y., Lim, C.-K., Dai, Z., Yu, G., Haus, J. W., Zhang, H., & Prasad, P. N. (2019) · Physics Reports · doi:10.1016/j.physrep.2019.01.005 · Cited by 337
Self-citationABX3 Perovskites for Tandem Solar Cells
Anaya, M., Lozano, G., Calvo, M. E., & Míguez, H. (2017) · Joule · doi:10.1016/j.joule.2017.09.017 · Cited by 286
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Self-citationRecent Advances in Perovskite Photodetectors for Image Sensing
Li, L., Ye, S., Qu, J., Zhou, F., Song, J., & Shen, G. (2021) · Small · doi:10.1002/smll.202005606 · Cited by 235
Micro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Metadata
- Authors
- Mao, J., Sha, W. E. I., Zhang, H., Ren, X., Zhuang, J., Roy, V. A. L., Wong, K. S., & Choy, W. C. H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-01-24
- Volume
- 27
- Issue
- 10
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2581301862
- Cited by
- 131
- References
- 4
- FWCI
- 5.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.