The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels
Abstract
Despite extensive progress to engineer hydrogels for a broad range of technologies, practical applications have remained elusive due to their (until recently) poor mechanical properties and lack of fabrication approaches, which constrain active structures to simple geometries. This study demonstrates a family of ionic composite hydrogels with excellent mechanical properties that can be rapidly 3D‐printed at high resolution using commercial stereolithography technology. The new material design leverages the dynamic and reversible nature of ionic interactions present in the system with the reinforcement ability of nanoparticles. The composite hydrogels combine within a single platform tunable stiffness, toughness, extensibility, and resiliency behavior not reported previously in other engineered hydrogels. In addition to their excellent mechanical performance, the ionic composites exhibit fast gelling under near‐UV exposure, remarkable conductivity, and fast osmotically driven actuation. The design of such ionic composites, which combine a range of tunable properties and can be readily 3D‐printed into complex architectures, provides opportunities for a variety of practical applications such as artificial tissue, soft actuators, compliant conductors, and sensors for soft robotics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Highly stretchable electroluminescent skin for optical signaling and tactile sensing
Larson, C., Peele, B., Li, S., Robinson, S., Totaro, M., Beccai, L., Mazzolai, B., & Shepherd, R. (2016) · Science · doi:10.1126/science.aac5082 · Cited by 1,393
Self-citationThoniyot, P., Tan, M. J., Karim, A. A., Young, D. J., & Loh, X. J. (2015) · Advanced Science · doi:10.1002/advs.201400010 · Cited by 928
Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt
Bai, Y., Chen, B., Xiang, F., Zhou, J., Wang, H., & Suo, Z. (2014) · Applied Physics Letters · doi:10.1063/1.4898189 · Cited by 383
Cited by
Highly Stretchable, Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics
Zhou, Y., Wan, C., Yang, Y., Yang, H., Wang, S., Dai, Z., Ji, K., Jiang, H., Chen, X., & Long, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806220 · Cited by 933
Ye, Y., Zhang, Y., Chen, Y., Han, X., & Jiang, F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003430 · Cited by 826
Lei, Z., & Wu, P. (2019) · Nature Communications · doi:10.1038/s41467-019-11364-w · Cited by 432
3D Printing of Multifunctional Hydrogels
Chen, Z., Zhao, D., Liu, B., Nian, G., Li, X., Yin, J., Qu, S., & Yang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900971 · Cited by 398
3D printing of electrically conductive hydrogels for tissue engineering and biosensors – A review
Distler, T., & Boccaccini, A. R. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.044 · Cited by 326
Metadata
- Authors
- Odent, J., Wallin, T. J., Pan, W., Kruemplestaedter, K., Shepherd, R. F., & Giannelis, E. P.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2017-07-17
- Volume
- 27
- Issue
- 33
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2735536331
- Cited by
- 218
- References
- 4
- FWCI
- 7.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels. https://app.cochat.ai/papers/10.1002/adfm.201701807
- The paper
- Odent, J., Wallin, T. J., Pan, W., Kruemplestaedter, K., Shepherd, R. F., & Giannelis, E. P. (2017). Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels. Advanced Functional Materials. https://doi.org/10.1002/adfm.201701807
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.