The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Abstract
Graphene aerogel microlattices (GAMs) hold great prospects for many multifunctional applications due to their low density, high porosity, designed lattice structures, good elasticity, and tunable electrical conductivity. Previous 3D printing approaches to fabricate GAMs require either high content of additives or complex processes, limiting their wide applications. Here, a facile ion‐induced gelation method is demonstrated to directly print GAMs from graphene oxide (GO) based ink. With trace addition of Ca 2+ ions as gelators, aqueous GO sol converts to printable gel ink. Self‐standing 3D structures with programmable microlattices are directly printed just in air at room temperature. The rich hierarchical pores and high electrical conductivity of GAMs bring admirable capacitive performance for supercapacitors. The gravimetric capacitance (Cs) of GAMs is 213 F g−1 at 0.5 A g−1 and 183 F g−1 at 100 A g−1, and retains over 90% after 50 000 cycles. The facile, direct 3D printing of neat graphene oxide can promote wide applications of GAMs from energy storage to tissue engineering scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Graphene-Based Supercapacitor with an Ultrahigh Energy Density
Liu, C., Yu, Z., Neff, D., Zhamu, A., & Jang, B. Z. (2010) · Nano Letters · doi:10.1021/nl102661q · Cited by 3,207
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Self-citationLiquid-Mediated Dense Integration of Graphene Materials for Compact Capacitive Energy Storage
Yang, X., Cheng, C., Wang, Y., Qiu, L., & Li, D. (2013) · Science · doi:10.1126/science.1239089 · Cited by 1,838
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Pei, S., Zhao, J., Du, J., Ren, W., & Cheng, H.-M. (2010) · Carbon · doi:10.1016/j.carbon.2010.08.006 · Cited by 1,621
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Biomimetic superelastic graphene-based cellular monoliths
Qiu, L., Liu, J. Z., Chang, S. L. Y., Wu, Y., & Li, D. (2012) · Nature Communications · doi:10.1038/ncomms2251 · Cited by 1,250
Ultrathin Planar Graphene Supercapacitors
Yoo, J. J., Balakrishnan, K., Huang, J., Meunier, V., Sumpter, B. G., Srivastava, A., Conway, M., Mohana Reddy, A. L., Yu, J., Vajtai, R., et al. (2011) · Nano Letters · doi:10.1021/nl200225j · Cited by 1,236
Synthesis of Graphene Aerogel with High Electrical Conductivity
Worsley, M. A., Pauzauskie, P. J., Olson, T. Y., Biener, J., Satcher, J. H., & Baumann, T. F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1072299 · Cited by 1,216
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Flexible Solid-State Supercapacitors Based on Three-Dimensional Graphene Hydrogel Films
Xu, Y., Lin, Z., Huang, X., Liu, Y., Huang, Y., & Duan, X. (2013) · ACS Nano · doi:10.1021/nn4000836 · Cited by 1,118
Self-citationGraphene chiral liquid crystals and macroscopic assembled fibres
Xu, Z., & Gao, C. (2011) · Nature Communications · doi:10.1038/ncomms1583 · Cited by 1,112
Self-citationYang, X., Zhu, J., Qiu, L., & Li, D. (2011) · Advanced Materials · doi:10.1002/adma.201100261 · Cited by 1,030
Applications of dip-pen nanolithography
Salaita, K., Wang, Y., & Mirkin, C. A. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.39 · Cited by 845
Beidaghi, M., & Wang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201292 · Cited by 812
Super-Compressible Foamlike Carbon Nanotube Films
Cao, A., Dickrell, P. L., Sawyer, W. G., Ghasemi-Nejhad, M. N., & Ajayan, P. M. (2005) · Science · doi:10.1126/science.1118957 · Cited by 785
High-Performance Supercapacitors Based on Poly(ionic liquid)-Modified Graphene Electrodes
Kim, T. Y., Lee, H. W., Stoller, M., Dreyer, D. R., Bielawski, C. W., Ruoff, R. S., & Suh, K. S. (2011) · ACS Nano · doi:10.1021/nn101968p · Cited by 725
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Jakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Liang, H., Guan, Q., Chen, L., Zhu, Z., Zhang, W., & Yu, S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201200710 · Cited by 673
On the Gelation of Graphene Oxide
Bai, H., Li, C., Wang, X., & Shi, G. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1120299 · Cited by 668
Folded Structured Graphene Paper for High Performance Electrode Materials
Liu, F., Song, S., Xue, D., & Zhang, H. (2012) · Advanced Materials · doi:10.1002/adma.201104691 · Cited by 657
Functionalized Graphene Hydrogel‐Based High‐Performance Supercapacitors
Xu, Y., Lin, Z., Huang, X., Wang, Y., Huang, Y., & Duan, X. (2013) · Advanced Materials · doi:10.1002/adma.201301928 · Cited by 633
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Ultralight Multiwalled Carbon Nanotube Aerogel
Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L. (2010) · ACS Nano · doi:10.1021/nn102246a · Cited by 509
Graphene Hydrogels Deposited in Nickel Foams for High‐Rate Electrochemical Capacitors
Chen, J., Sheng, K., Luo, P., Li, C., & Shi, G. (2012) · Advanced Materials · doi:10.1002/adma.201201978 · Cited by 438
Design and tailoring of a hierarchical graphene-carbon nanotube architecture for supercapacitors
Yang, S.-Y., Chang, K.-H., Tien, H.-W., Lee, Y.-F., Li, S.-M., Wang, Y.-S., Wang, J.-Y., Ma, C.-C. M., & Hu, C.-C. (2011) · J. Mater. Chem. · doi:10.1039/c0jm03199b · Cited by 407
Carbon Nanotubes with Temperature-Invariant Viscoelasticity from –196° to 1000°C
Xu, M., Futaba, D. N., Yamada, T., Yumura, M., & Hata, K. (2010) · Science · doi:10.1126/science.1194865 · Cited by 374
Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions
Hashim, D. P., Narayanan, N. T., Romo-Herrera, J. M., Cullen, D. A., Hahm, M. G., Lezzi, P., Suttle, J. R., Kelkhoff, D., Muñoz-Sandoval, E., Ganguli, S., et al. (2012) · Scientific Reports · doi:10.1038/srep00363 · Cited by 372
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Collapse of flexible polyelectrolytes in multivalent salt solutions
Solis, F. J., & de la Cruz, M. O. (2000) · The Journal of Chemical Physics · doi:10.1063/1.480763 · Cited by 211
Nanoparticle Inks for Directed Assembly of Three‐Dimensional Periodic Structures
Li, Q., & Lewis, J. A. (2003) · Advanced Materials · doi:10.1002/adma.200305413 · Cited by 168
Versatile Graphene Oxide Putty‐Like Material
Jiang, Y., Shao, H., Li, C., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603284 · Cited by 80
Self-citation
Research works printed but not linked: 8
- 10.1002/anie.201207760 · doi:10.1002/anie.201207760
- 10.1021/acsnano.6b01059 · DOI
- 10.1021/acsnano.7b03480 · doi:10.1021/acsnano.7b03480
- 10.1006/jcis.2002.8557 · doi:10.1006/jcis.2002.8557
- 10.1021/nn101187z · DOI · Paper page
- 10.1039/C4TA06533F · doi:10.1039/c4ta06533f
- Li C., 2017, Adv. Mater., 29, 7
- 10.1088/0957-4484/25/5/055401 · doi:10.1088/0957-4484/25/5/055401
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Emerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
Metadata
- Authors
- Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-02-19
- Volume
- 28
- Issue
- 16
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2792640832
- Cited by
- 370
- References
- 44
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- National Natural Science Foundation of China (21325417, 51533008, 51603183)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.