The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Abstract
Graphene aerogel microlattices (GAMs) hold great prospects for many multifunctional applications due to their low density, high porosity, designed lattice structures, good elasticity, and tunable electrical conductivity. Previous 3D printing approaches to fabricate GAMs require either high content of additives or complex processes, limiting their wide applications. Here, a facile ion‐induced gelation method is demonstrated to directly print GAMs from graphene oxide (GO) based ink. With trace addition of Ca 2+ ions as gelators, aqueous GO sol converts to printable gel ink. Self‐standing 3D structures with programmable microlattices are directly printed just in air at room temperature. The rich hierarchical pores and high electrical conductivity of GAMs bring admirable capacitive performance for supercapacitors. The gravimetric capacitance (Cs) of GAMs is 213 F g−1 at 0.5 A g−1 and 183 F g−1 at 100 A g−1, and retains over 90% after 50 000 cycles. The facile, direct 3D printing of neat graphene oxide can promote wide applications of GAMs from energy storage to tissue engineering scaffolds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Graphene-Based Supercapacitor with an Ultrahigh Energy Density
Liu, C., Yu, Z., Neff, D., Zhamu, A., & Jang, B. Z. (2010) · Nano Letters · doi:10.1021/nl102661q · Cited by 3,207
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Multifunctional, Ultra‐Flyweight, Synergistically Assembled Carbon Aerogels
Sun, H., Xu, Z., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201204576 · Cited by 1,888
Self-citation
Research works printed but not linked: 8
- 10.1002/anie.201207760 · doi:10.1002/anie.201207760
- 10.1021/acsnano.6b01059 · DOI
- 10.1021/acsnano.7b03480 · doi:10.1021/acsnano.7b03480
- 10.1006/jcis.2002.8557 · doi:10.1006/jcis.2002.8557
- 10.1021/nn101187z · DOI · Paper page
- 10.1039/C4TA06533F · doi:10.1039/c4ta06533f
- Li C., 2017, Adv. Mater., 29, 7
- 10.1088/0957-4484/25/5/055401 · doi:10.1088/0957-4484/25/5/055401
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Additive manufacturing of silica aerogels
Zhao, S., Siqueira, G., Drdova, S., Norris, D., Ubert, C., Bonnin, A., Galmarini, S., Ganobjak, M., Pan, Z., Brunner, S., et al. (2020) · Nature · doi:10.1038/s41586-020-2594-0 · Cited by 676
Emerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Zhi, D., Li, T., Li, J., Ren, H., & Meng, F. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108642 · Cited by 375
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Self-citationAdditive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 290
The Road Towards Planar Microbatteries and Micro‐Supercapacitors: From 2D to 3D Device Geometries
Zheng, S., Shi, X., Das, P., Wu, Z., & Bao, X. (2019) · Advanced Materials · doi:10.1002/adma.201900583 · Cited by 275
A Review on Plant Cellulose Nanofibre-Based Aerogels for Biomedical Applications
Abdul Khalil, H. P. S., Adnan, A. S., Yahya, E. B., Olaiya, N. G., Safrida, S., Hossain, M. S., Balakrishnan, V., Gopakumar, D. A., Abdullah, C. K., Oyekanmi, A. A., et al. (2020) · Polymers · doi:10.3390/polym12081759 · Cited by 273
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
Light-induced levitation of ultralight carbon aerogels via temperature control
Yanagi, R., Takemoto, R., Ono, K., & Ueno, T. (2021) · Scientific Reports · doi:10.1038/s41598-021-91918-5 · Cited by 8
Metadata
- Authors
- Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-02-19
- Volume
- 28
- Issue
- 16
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2792640832
- Cited by
- 370
- References
- 44
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- National Natural Science Foundation of China (21325417, 51533008, 51603183)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.