The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Tailoring Rod‐Like FeSe2 Coated with Nitrogen‐Doped Carbon for High‐Performance Sodium Storage
Abstract
Designing potential anodes for sodium‐ion battery with both remarkable durability and high‐rate capability has captured enormous attention so far. The engineering of size and morphology is deemed as an effective manner to boost the electrochemical properties. Owing to the anisotropic self‐assembly of iron selenide, rod‐like FeSe 2 coates with nitrogen‐doped carbon is prepared through the thermal reaction of Prussian blue with selenium. Notably, the cyano groups are effectively transformed into N‐doped carbon with FeNC bonds, which uniformly coats FeSe 2, prompting Na+ transportations. Interestingly, the particle size is tailored by heating rates, along with increased carbon content, leading to broadened energy levels for redox reaction. Bestowed by these advantages, the FeSe 2/N‐C as Na‐storage anode delivers impressive electrochemical properties. Even at a rather high rate of 10.0 A g−1, a considerable capacity of 308 mAh g−1 is yielded over 10 000 loops. Supported by the detailed analysis of kinetic features, reduced size of particles could bring about the enhanced contributions of pseudocapacitive and quickening rate of ions transferring. The phase evolutions are further investigated by in situ EIS and ex‐situ technologies. The work is expected to provide a new strategy to prepare metal‐selenide with controllable size and induce the faster kinetic of high‐rate materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Simultaneous Nitrogen Doping and Reduction of Graphene Oxide
Li, X., Wang, H., Robinson, J. T., Sanchez, H., Diankov, G., & Dai, H. (2009) · Journal of the American Chemical Society · doi:10.1021/ja907098f · Cited by 1,801
Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance
Chao, D., Zhu, C., Yang, P., Xia, X., Liu, J., Wang, J., Fan, X., Savilov, S. V., Lin, J., Fan, H. J., et al. (2016) · Nature Communications · doi:10.1038/ncomms12122 · Cited by 1,447
Hou, H., Banks, C. E., Jing, M., Zhang, Y., & Ji, X. (2015) · Advanced Materials · doi:10.1002/adma.201503816 · Cited by 1,214
Self-citationNanostructured metal sulfides for energy storage
Rui, X., Tan, H., & Yan, Q. (2014) · Nanoscale · doi:10.1039/c4nr03057e · Cited by 1,003
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
Chao, D., Liang, P., Chen, Z., Bai, L., Shen, H., Liu, X., Xia, X., Zhao, Y., Savilov, S. V., Lin, J., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b05566 · Cited by 973
Hu, Z., Liu, Q., Chou, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201700606 · Cited by 911
High-Performance Sodium-Ion Pseudocapacitors Based on Hierarchically Porous Nanowire Composites
Chen, Z., Augustyn, V., Jia, X., Xiao, Q., Dunn, B., & Lu, Y. (2012) · ACS Nano · doi:10.1021/nn300920e · Cited by 772
FeSe2 Microspheres as a High‐Performance Anode Material for Na‐Ion Batteries
Zhang, K., Hu, Z., Liu, X., Tao, Z., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201500196 · Cited by 638
Wang, S., Xia, L., Yu, L., Zhang, L., Wang, H., & Lou, X. W. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201502217 · Cited by 527
An Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries
Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08601a · Cited by 447
Guo, Q., Ma, Y., Chen, T., Xia, Q., Yang, M., Xia, H., & Yu, Y. (2017) · ACS Nano · doi:10.1021/acsnano.7b07132 · Cited by 421
Luo, W., Schardt, J., Bommier, C., Wang, B., Razink, J., Simonsen, J., & Ji, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12389h · Cited by 364
Self-citationAdvances in Structure and Property Optimizations of Battery Electrode Materials
Meng, J., Guo, H., Niu, C., Zhao, Y., Xu, L., Li, Q., & Mai, L. (2017) · Joule · doi:10.1016/j.joule.2017.08.001 · Cited by 312
Li, B., Xi, B., Feng, Z., Lin, Y., Liu, J., Feng, J., Qian, Y., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201705788 · Cited by 302
Nanocomposite Materials for the Sodium–Ion Battery: A Review
Liang, Y., Lai, W., Miao, Z., & Chou, S. (2018) · Small · doi:10.1002/smll.201702514 · Cited by 299
Ge, P., Zhang, C., Hou, H., Wu, B., Zhou, L., Li, S., Wu, T., Hu, J., Mai, L., & Ji, X. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.04.018 · Cited by 275
Self-citationWu, C., Jiang, Y., Kopold, P., van Aken, P. A., Maier, J., & Yu, Y. (2016) · Advanced Materials · doi:10.1002/adma.201600964 · Cited by 266
Recent progress in rational design of anode materials for high-performance Na-ion batteries
Cui, J., Yao, S., & Kim, J.-K. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.12.005 · Cited by 261
Fan, H., Yu, H., Zhang, Y., Guo, J., Wang, Z., Wang, H., Zhao, N., Zheng, Y., Du, C., Dai, Z., et al. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.006 · Cited by 259
He, G., Qiao, M., Li, W., Lu, Y., Zhao, T., Zou, R., Li, B., Darr, J. A., Hu, J., Titirici, M., et al. (2017) · Advanced Science · doi:10.1002/advs.201600214 · Cited by 241
Ge, P., Hou, H., Banks, C. E., Foster, C. W., Li, S., Zhang, Y., He, J., Zhang, C., & Ji, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.012 · Cited by 225
Self-citationElectrospun carbon-based nanostructured electrodes for advanced energy storage – A review
Li, X., Chen, Y., Huang, H., Mai, Y., & Zhou, L. (2016) · Energy storage materials · doi:10.1016/j.ensm.2016.06.002 · Cited by 224
Nitrogen-Rich Mesoporous Carbon as Anode Material for High-Performance Sodium-Ion Batteries
Liu, H., Jia, M., Sun, N., Cao, B., Chen, R., Zhu, Q., Wu, F., Qiao, N., & Xu, B. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06898 · Cited by 208
Wang, M., Yang, Y., Yang, Z., Gu, L., Chen, Q., & Yu, Y. (2017) · Advanced Science · doi:10.1002/advs.201600468 · Cited by 206
Na Storage Capability Investigation of a Carbon Nanotube-Encapsulated Fe1–xS Composite
Xiao, Y., Hwang, J.-Y., Belharouak, I., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00660 · Cited by 199
Ou, X., Li, J., Zheng, F., Wu, P., Pan, Q., Xiong, X., Yang, C., & Liu, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.097 · Cited by 183
Structural design of anode materials for sodium-ion batteries
Wang, W., Li, W., Wang, S., Miao, Z., Liu, H. K., & Chou, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10823k · Cited by 166
Improved Sodium-Ion Storage Performance of Ultrasmall Iron Selenide Nanoparticles
Zhao, F., Shen, S., Cheng, L., Ma, L., Zhou, J., Ye, H., Han, N., Wu, T., Li, Y., & Lu, J. B. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00915 · Cited by 152
Cho, J. S., Lee, J.-K., & Kang, Y. C. (2016) · Scientific Reports · doi:10.1038/srep23699 · Cited by 148
Yu, B., Qi, F., Zheng, B., Hou, W., Zhang, W., Li, Y., & Chen, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08955d · Cited by 140
Self-citationYang, X., Zhang, J., Wang, Z., Wang, H., Zhi, C., Yu, D. Y. W., & Rogach, A. L. (2017) · Small · doi:10.1002/smll.201702669 · Cited by 134
Ge, P., Hou, H., Cao, X., Li, S., Zhao, G., Guo, T., Wang, C., & Ji, X. (2018) · Advanced Science · doi:10.1002/advs.201800080 · Cited by 134
Self-citationTailoring pseudocapacitive materials from a mechanistic perspective
Eftekhari, A., & Mohamedi, M. (2017) · Materials Today Energy · doi:10.1016/j.mtener.2017.10.009 · Cited by 133
Choi, S. H., & Kang, Y. C. (2016) · Nanoscale · doi:10.1039/c5nr07733h · Cited by 131
FeSe2 clusters with excellent cyclability and rate capability for sodium-ion batteries
Wei, X., Tang, C., An, Q., Yan, M., Wang, X., Hu, P., Cai, X., & Mai, L. (2017) · Nano Research · doi:10.1007/s12274-017-1537-z · Cited by 109
Ou, X., Liang, X., Zheng, F., Wu, P., Pan, Q., Xiong, X., Yang, C., & Liu, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.11.198 · Cited by 80
Park, G. D., Kim, J., & Kang, Y. C. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.09.019 · Cited by 71
Lu, X., Wang, P., Liu, K., Niu, C., & Wang, H. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.022 · Cited by 57
High-rate sodium ion anodes assisted by N-doped carbon sheets
Ge, P., Hou, H., Liu, N., Qiu, X., Zeng, Q., Wang, C., Shao, L., & Ji, X. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00134g · Cited by 28
Self-citation
Cited by
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Ni, S., Qu, H., Xu, Z., Zhu, X., Xing, H., Wang, L., Yu, J., Liu, H., Chen, C., & Yang, L. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120638 · Cited by 401
Self-citationCarbon quantum dot micelles tailored hollow carbon anode for fast potassium and sodium storage
Hong, W., Zhang, Y., Yang, L., Tian, Y., Ge, P., Hu, J., Wei, W., Zou, G., Hou, H., & Ji, X. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104038 · Cited by 296
Self-citationTransition metal chalcogenide anodes for sodium storage
Ali, Z., Zhang, T., Asif, M., Zhao, L., Yu, Y., & Hou, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.008 · Cited by 280
Zhong, M., Kong, L., Li, N., Liu, Y.-Y., Zhu, J., & Bu, X.-H. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.02.029 · Cited by 269
Metadata
- Authors
- Ge, P., Hou, H., Li, S., Yang, L., & Ji, X.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-06-04
- Volume
- 28
- Issue
- 30
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2806442355
- Cited by
- 373
- References
- 43
- FWCI
- 16.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.