The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ionic Additive Engineering Toward High‐Efficiency Perovskite Solar Cells with Reduced Grain Boundaries and Trap Density
Abstract
Organic–inorganic hybrid perovskite solar cells have emerged as one of the promising photovoltaic candidates to generate renewable energy. However, the large amounts of grain boundaries and trap states that exist in the bulk or interfacial regions of perovskite films limit further enhancement of device efficiency. Herein, an additive engineering strategy is introduced employing trimethylammonium chloride in the methylammonium iodide precursor solution to prepare methylammonium lead iodide perovskite films with reduced grain boundaries and trap densities. This leads to an increased charge carrier diffusion coefficient and diffusion length, as evaluated by impedance and voltage decay measurements, intensity‐modulated photovoltage, and photocurrent spectroscopies. The proportion of nonradiative recombination processes is significantly reduced, consequently increasing device efficiency from 19.1% to 20.9% in these perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
The Role of Grain Boundaries in Perovskite Solar Cells
Castro‐Méndez, A., Hidalgo, J., & Correa‐Baena, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901489 · Cited by 330
Zhang, H., Nazeeruddin, M. K., & Choy, W. C. H. (2019) · Advanced Materials · doi:10.1002/adma.201805702 · Cited by 275
Verification and mitigation of ion migration in perovskite solar cells
Lee, J.-W., Kim, S.-G., Yang, J.-M., Yang, Y., & Park, N.-G. (2019) · APL Materials · doi:10.1063/1.5085643 · Cited by 271
Metadata
- Authors
- Cai, F., Yan, Y., Yao, J., Wang, P., Wang, H., Gurney, R. S., Liu, D., & Wang, T.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2018-06-22
- Volume
- 28
- Issue
- 34
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2809671945
- Cited by
- 182
- References
- 1
- FWCI
- 10.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.