The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Encapsulation of Printable Mesoscopic Perovskite Solar Cells Enables High Temperature and Long‐Term Outdoor Stability
Abstract
Perovskite solar cells (PSCs) have achieved high power conversion efficiency on the lab scale, rivaling the other commercialized photovoltaic technologies. However, stability issues have made it difficult for PSCs to achieve comparable or practical lifetimes in outdoor applications. Here, three different types of hot melt films (polyurethane, PU; polyolefin, POE; and ethylene vinyl acetate, EVA) together with glass sheets are employed to encapsulate printable PSCs. The influence of thermal stress and the encapsulation (lamination) process on cell performance is investigated. It is found that POE and EVA, which are the typical encapsulants for silicon and thin film solar cells, are not suitable for the encapsulation of PSCs due to a high laminating temperature (>130 °C) or corrosion of the perovskite absorber. By contrast, encapsulation with PU can be carried out at a relatively mild temperature of 80 °C, and significantly enhance the thermal stability of the cells. When this encapsulation method is applied to large‐area (substrate area 100 cm 2) printable PSC submodules, the submodules can maintain 97.52% of the initial efficiency after 2136 h under outdoor conditions (location: 39°19′48″N 114°37′26″E). This work demonstrates the potential of industrially relevant encapsulation techniques to enable the commercial viability of PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Self-citation
Cited by
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Review of degradation and failure phenomena in photovoltaic modules
Aghaei, M., Fairbrother, A., Gok, A., Ahmad, S., Kazim, S., Lobato, K., Oreski, G., Reinders, A., Schmitz, J., Theelen, M., et al. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112160 · Cited by 636
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Development of encapsulation strategies towards the commercialization of perovskite solar cells
Ma, S., Yuan, G., Zhang, Y., Yang, N., Li, Y., & Chen, Q. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02882k · Cited by 395
Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking
Mei, A., Sheng, Y., Ming, Y., Hu, Y., Rong, Y., Zhang, W., Luo, S., Na, G., Tian, C., Hou, X., et al. (2020) · Joule · doi:10.1016/j.joule.2020.09.010 · Cited by 386
Self-citation
Metadata
- Authors
- Fu, Z., Xu, M., Sheng, Y., Yan, Z., Meng, J., Tong, C., Li, D., Wan, Z., Ming, Y., Mei, A., Hu, Y., Rong, Y., & Han, H.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-02-10
- Volume
- 29
- Issue
- 16
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2911563152
- Cited by
- 211
- References
- 1
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.