The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electrochromic Effect in Titanium Carbide MXene Thin Films Produced by Dip‐Coating
Abstract
MXenes, a large family of 2D transition metal carbides and nitrides, have shown potential in energy storage and optoelectronic applications. Here, the optoelectronic and pseudocapacitive properties of titanium carbide (Ti 3 C 2 Tx) are combined to create a MXene electrochromic device, with a visible absorption peak shift from 770 to 670 nm and a 12% reversible change in transmittance with a switching rate of <1 s when cycled in an acidic electrolyte under applied potentials of less than 1 V. By probing the electrochromic effect in different electrolytes, it is shown that acidic electrolytes (H 3 PO 4 and H 2 SO 4) lead to larger absorption peak shifts and a higher change of transmittance than the neutral electrolyte (MgSO 4) (Δλ is 100 nm vs 35 nm and Δ T770 nm is ≈12% vs ≈3%, respectively), hinting at the surface redox mechanism involved. Further investigation of the mechanism by in situ X‐ray diffraction and Raman spectroscopy reveals that the reversible shift of the absorption peak is attributed to protonation/deprotonation of oxide‐like surface functionalities. As a proof of concept, it is shown that Ti 3 C 2 Tx MXene, dip‐coated on a glass substrate, functions as both transparent conductive coating and active material in an electrochromic device, opening avenues for further research into optoelectronic and photonic applications of MXenes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured Tungsten Oxide – Properties, Synthesis, and Applications
Zheng, H., Ou, J. Z., Strano, M. S., Kaner, R. B., Mitchell, A., & Kalantar‐zadeh, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002477 · Cited by 1,479
Cited by
MXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationModified MAX Phase Synthesis for Environmentally Stable and Highly Conductive Ti 3 C 2 MXene
Mathis, T. S., Maleski, K., Goad, A., Sarycheva, A., Anayee, M., Foucher, A. C., Hantanasirisakul, K., Shuck, C. E., Stach, E. A., & Gogotsi, Y. (2021) · ACS Nano · doi:10.1021/acsnano.0c08357 · Cited by 1,001
Self-citationScalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Self-citationEmerging 2D MXenes for supercapacitors: status, challenges and prospects
Hu, M., Zhang, H., Hu, T., Fan, B., Wang, X., & Li, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00175a · Cited by 828
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citation
Metadata
- Authors
- Salles, P., Pinto, D., Hantanasirisakul, K., Maleski, K., Shuck, C. E., & Gogotsi, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-03-03
- Volume
- 29
- Issue
- 17
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2919535980
- Cited by
- 215
- References
- 1
- FWCI
- 8.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.