The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Knittable and Washable Multifunctional MXene‐Coated Cellulose Yarns
Open accessAbstract
Textile‐based electronics enable the next generation of wearable devices, which have the potential to transform the architecture of consumer electronics. Highly conductive yarns that can be manufactured using industrial‐scale processing and be washed like everyday yarns are needed to fulfill the promise and rapid growth of the smart textile industry. By coating cellulose yarns with Ti 3 C 2 Tx MXene, highly conductive and electroactive yarns are produced, which can be knitted into textiles using an industrial knitting machine. It is shown that yarns with MXene loading of ≈77 wt% (≈2.2 mg cm−1) have conductivity of up to 440 S cm−1. After washing for 45 cycles at temperatures ranging from 30 to 80 °C, MXene‐coated cotton yarns exhibit a minimal increase in resistance while maintaining constant MXene loading. The MXene‐coated cotton yarn electrode offers a specific capacitance of 759.5 mF cm−1 at 2 mV s−1. A fully knitted textile‐based capacitive pressure sensor is also prepared, which offers high sensitivity (gauge factor of ≈6.02), wide sensing range of up to ≈20% compression, and excellent cycling stability (2000 cycles at ≈14% compression strain). This work provides new and practical insights toward the development of platform technology that can integrate MXene in cellulose‐based yarns for textile‐based devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationCation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Self-citationSkin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Self-citationBest practice methods for determining an electrode material's performance for ultracapacitors
Stoller, M. D., & Ruoff, R. S. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00074d · Cited by 2,282
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Self-citationOxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationYu, D., Goh, K., Wang, H., Wei, L., Jiang, W., Zhang, Q., Dai, L., & Chen, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.93 · Cited by 1,436
Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance
Zhao, M., Ren, C. E., Ling, Z., Lukatskaya, M. R., Zhang, C., Van Aken, K. L., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404140 · Cited by 1,426
Self-citationStrong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity
Behabtu, N., Young, C. C., Tsentalovich, D. E., Kleinerman, O., Wang, X., Ma, A. W. K., Bengio, E. A., ter Waarbeek, R. F., de Jong, J. J., Hoogerwerf, R. E., et al. (2013) · Science · doi:10.1126/science.1228061 · Cited by 1,354
Two-Dimensional Ultrathin MXene Ceramic Nanosheets for Photothermal Conversion
Lin, H., Wang, X., Yu, L., Chen, Y., & Shi, J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04339 · Cited by 1,314
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Self-citationZhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
Self-citationConductive Fiber‐Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics
Lee, J., Kwon, H., Seo, J., Shin, S., Koo, J. H., Pang, C., Son, S., Kim, J. H., Jang, Y. H., Kim, D. E., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500009 · Cited by 1,152
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Yetisen, A. K., Qu, H., Manbachi, A., Butt, H., Dokmeci, M. R., Hinestroza, J. P., Skorobogatiy, M., Khademhosseini, A., & Yun, S. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b08176 · Cited by 752
All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage
Peng, Y.-Y., Akuzum, B., Kurra, N., Zhao, M.-Q., Alhabeb, M., Anasori, B., Kumbur, E. C., Alshareef, H. N., Ger, M.-D., & Gogotsi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01717g · Cited by 697
Self-citationLukatskaya, M. R., Bak, S., Yu, X., Yang, X., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500589 · Cited by 689
Self-citationLiu, L., Yu, Y., Yan, C., Li, K., & Zheng, Z. (2015) · Nature Communications · doi:10.1038/ncomms8260 · Cited by 671
Fiber-Based All-Solid-State Flexible Supercapacitors for Self-Powered Systems
Xiao, X., Li, T., Yang, P., Gao, Y., Jin, H., Ni, W., Zhan, W., Zhang, X., Cao, Y., Zhong, J., et al. (2012) · ACS Nano · doi:10.1021/nn303530k · Cited by 640
Oxidation stability of Ti3C2Tx MXene nanosheets in solvents and composite films
Habib, T., Zhao, X., Shah, S. A., Chen, Y., Sun, W., An, H., Lutkenhaus, J. L., Radović, M., & Green, M. J. (2019) · npj 2D Materials and Applications · doi:10.1038/s41699-019-0089-3 · Cited by 629
Weng, W., Chen, P., He, S., Sun, X., & Peng, H. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201507333 · Cited by 577
True solutions of single-walled carbon nanotubes for assembly into macroscopic materials
Davis, V. A., Parra-Vasquez, A. N. G., Green, M. J., Rai, P. K., Behabtu, N., Prieto, V., Booker, R. D., Schmidt, J., Kesselman, E., Zhou, W., et al. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2009.302 · Cited by 559
Knitted and screen printed carbon-fiber supercapacitors for applications in wearable electronics
Jost, K., Stenger, D., Perez, C. R., McDonough, J. K., Lian, K., Gogotsi, Y., & Dion, G. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40515j · Cited by 556
Self-citationEmergence of fiber supercapacitors
Yu, D., Qian, Q., Wei, L., Jiang, W., Goh, K., Wei, J., Zhang, J., & Chen, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00286e · Cited by 547
Carbon coated textiles for flexible energy storage
Jost, K., Perez, C. R., McDonough, J. K., Presser, V., Heon, M., Dion, G., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02421c · Cited by 545
Self-citationInfluences from solvents on charge storage in titanium carbide MXenes
Wang, X., Mathis, T. S., Li, K., Lin, Z., Vlcek, L., Torita, T., Osti, N. C., Hatter, C., Urbankowski, P., Sarycheva, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0339-9 · Cited by 539
Self-citationTextile energy storage in perspective
Jost, K., Dion, G., & Gogotsi, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00203b · Cited by 534
Self-citationCoaxial Fiber Supercapacitor Using All-Carbon Material Electrodes
Le, V. T., Kim, H., Ghosh, A., Kim, J., Chang, J., Vu, Q. A., Pham, D. T., Lee, J.-H., Kim, S.-W., & Lee, Y. H. (2013) · ACS Nano · doi:10.1021/nn4016345 · Cited by 527
MXene‐on‐Paper Coplanar Microsupercapacitors
Kurra, N., Ahmed, B., Gogotsi, Y., & Alshareef, H. N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601372 · Cited by 480
Self-citationSize-Dependent Physical and Electrochemical Properties of Two-Dimensional MXene Flakes
Maleski, K., Ren, C. E., Zhao, M.-Q., Anasori, B., & Gogotsi, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04662 · Cited by 461
Self-citationAn Integrated “Energy Wire” for both Photoelectric Conversion and Energy Storage
Chen, T., Qiu, L., Yang, Z., Cai, Z., Ren, J., Li, H., Lin, H., Sun, X., & Peng, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201207023 · Cited by 440
An investigation into the factors governing the oxidation of two-dimensional Ti3C2MXene
Chae, Y., Kim, S. J., Cho, S.-Y., Choi, J., Maleski, K., Lee, B.-J., Jung, H.-T., Gogotsi, Y., Lee, Y., & Ahn, C. W. (2019) · Nanoscale · doi:10.1039/c9nr00084d · Cited by 403
Self-citationLevi, M. D., Lukatskaya, M. R., Sigalov, S., Beidaghi, M., Shpigel, N., Daikhin, L., Aurbach, D., Barsoum, M. W., & Gogotsi, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400815 · Cited by 384
Self-citationBiscrolling Nanotube Sheets and Functional Guests into Yarns
Lima, M. D., Fang, S., Lepró, X., Azad, C. L., Ovalle‐Robles, R., Carretero‐González, J., Castillo‐Martínez, E., Kozlov, M. E., Oh, J., Rawat, N., et al. (2011) · Science · doi:10.1126/science.1195912 · Cited by 372
Knitted Strain Sensor Textiles of Highly Conductive All-Polymeric Fibers
Seyedin, S., Razal, J. M., Innis, P. C., Jeiranikhameneh, A., Beirne, S., & Wallace, G. G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04892 · Cited by 331
Self-citationLiu, N., Ma, W., Tao, J., Zhang, X., Su, J., Li, L., Yang, C., Gao, Y., Golberg, D., & Bando, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301311 · Cited by 285
Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors
Zhang, J., Seyedin, S., Qin, S. A., Wang, Z., Moradi, S., Yang, F., Lynch, P. A., Yang, W. R., Liu, J., Wang, X., et al. (2019) · Small · doi:10.1002/smll.201804732 · Cited by 280
Self-citationSeyedin, S., Yanza, E. R. S., & Razal, J. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08355f · Cited by 279
Self-citationHigh‐Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors
Wang, Z., Qin, S., Seyedin, S., Zhang, J., Wang, J., Levitt, A., Li, N., Haines, C., Ovalle‐Robles, R., Lei, W., et al. (2018) · Small · doi:10.1002/smll.201802225 · Cited by 267
Self-citationSmentkowski, V. S. (2000) · Progress in Surface Science · doi:10.1016/s0079-6816(99)00021-0 · Cited by 223
Natural Fiber Welded Electrode Yarns for Knittable Textile Supercapacitors
Jost, K., Durkin, D. P., Haverhals, L. M., Brown, E. K., Langenstein, M., De Long, H. C., Trulove, P. C., Gogotsi, Y., & Dion, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401286 · Cited by 197
Self-citationHe, N., Pan, Q., Liu, Y., & Gao, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05982 · Cited by 51
Cited by
End-to-end design of wearable sensors
Ates, H. C., Nguyen, P. Q., Gonzalez-Macia, L., Morales-Narváez, E., Güder, F., Collins, J. J., & Dincer, C. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00460-x · Cited by 1,306
Scalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Self-citationEmerging 2D MXenes for supercapacitors: status, challenges and prospects
Hu, M., Zhang, H., Hu, T., Fan, B., Wang, X., & Li, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00175a · Cited by 828
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citation
Metadata
- Authors
- Uzun, S., Seyedin, S., Stoltzfus, A. L., Levitt, A. S., Alhabeb, M., Anayee, M., Strobel, C. J., Razal, J. M., Dion, G., & Gogotsi, Y.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2019-09-05
- Volume
- 29
- Issue
- 45
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W2971797083
- Cited by
- 385
- References
- 44
- FWCI
- 13.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.