3D Printed Ti3C2Tx MXene/Cellulose Nanofiber Architectures for Solid‐State Supercapacitors: Ink Rheology, 3D Printability, and Electrochemical Performance
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Direct ink writing technology is capable of using 2D MXene to construct 3D architectures for electrochemical energy storage (EES) devices that are normally difficult to achieve using conventional techniques. However, to meet specific rheological requirements for 3D printing, a large amount of MXene is needed in the ink, resulting in a severe self‐restacking structure after drying. Herein, a series of cellulose nanofibers (CNFs) with different morphologies and surface chemistries are applied to enhance the rheology of the MXene‐based inks with exceptional 3D printability. Various 3D architectures with superior shape fidelity and geometric accuracy are successfully printed using the optimized hybrid ink at a low solid content, generating self‐standing, hierarchically porous structures after being freeze‐dried, which improves surface area accessibility, ion transport efficiency, and ultimately, capacitive performance. A solid‐state interdigitated symmetrical supercapacitor is further 3D printed, which delivers an areal capacitance of 2.02 F cm−2 and an energy density of 101 μWh cm−2 at a power density of 0.299 mW cm−2, and maintains a capacitance retention rate of 85% after 5000 cycles. This work demonstrates the integration of 1D CNFs and 2D MXene in 3D printing technology to prepare customized, multiscale, and multidimensional architectures for the next generation of EES devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Highly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Metadata
- Authors
- Zhou, G., Li, M., Liu, C., Wu, Q., & Mei, C.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2021-12-16
- Volume
- 32
- Issue
- 14
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4200245626
- Cited by
- 212
- References
- 2
- FWCI
- 8.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printed Ti3C2Tx MXene/Cellulose Nanofiber Architectures for Solid‐State Supercapacitors: Ink Rheology, 3D Printability, and Electrochemical Performance. https://app.cochat.ai/papers/10.1002/adfm.202109593
- The paper
- Zhou, G., Li, M., Liu, C., Wu, Q., & Mei, C. (2022). 3D Printed Ti3C2Tx MXene/Cellulose Nanofiber Architectures for Solid‐State Supercapacitors: Ink Rheology, 3D Printability, and Electrochemical Performance. Advanced Functional Materials. https://doi.org/10.1002/adfm.202109593
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.