Beetle‐Inspired Gradient Slant Structures for Capacitive Pressure Sensor with a Broad Linear Response Range
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Flexible pressure sensors with broad linearity range and excellent sensor‐to‐sensor uniformity have attracted unprecedented attention in the electronic skins, human–machine interfaces, and environmental monitoring. However, challenges including poor sensor‐to‐sensor uniformity owing to the randomness of the used nanomaterials or porous structures and saturated response that leads to a restricted linearity range because of structural stiffening have been yet addressed. Herein, a novel dielectric layer based on beetle‐inspired gradient slant structures (GSS) is proposed to endow capacitive pressure sensors with extensive linearity range and excellent sensor‐to‐sensor uniformity. The excellent compressibility of the GSS due to the bending deformation of the slant pillars significantly enhances sensor sensitivity. The broad linearity range comes from the compensation of contact area during sequential contact of the GSS dielectric layer from tall to low slant pillars with electrodes. The high sensor‐to‐sensor uniformity is ascribed to the excellent batch‐to‐batch consistency of prepared GSS via 3D printing‐based fabrication process. Moreover, the proposed GSS‐based pressure sensors present rapid response/recovery, low detection limit, excellent dynamic response, negligible hysteresis, and outstanding long‐term stability. Finally, the excellent applicabilities of proposed capacitive pressure sensors in diverse scenarios including external pressure stimuli detection, a flexible perception array, and a smart insole system are demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Ultra-stretchable and skin-mountable strain sensors using carbon nanotubes–Ecoflex nanocomposites
Amjadi, M., Yoon, Y. J., & Park, I. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/37/375501 · Cited by 817
Self-citationEmerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
Bullock, J. M. R., & Federle, W. (2011) · Naturwissenschaften · doi:10.1007/s00114-011-0781-4 · Cited by 88
Metadata
- Authors
- Wu, L., Li, X., Choi, J., Zhao, Z., Qian, L., Yu, B., & Park, I.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2024-02-08
- Volume
- 34
- Issue
- 26
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4391690192
- Cited by
- 163
- References
- 4
- FWCI
- 17.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.