The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Gelation‐Constrained Freeze‐Casting Fabrication of Ultra‐Homogeneous Nanocomposite Aerogels with Superelasticity and Harsh Environment Tolerance
Abstract
Freeze casting is a versatile technique for organizing low‐dimensional building blocks into ordered porous structural materials. However, the freeze‐casting fabrication of porous materials with a robust and topologically elastic skeleton to withstand harsh conditions is challenging. Herein, a silanized ultra‐homogeneous nanocomposite aerogel is fabricated using a gelation‐constrained freeze‐casting strategy. Diverging from traditional freeze‐casting methods employing a solution precursor, the approach involves a gelation‐constrained freeze‐casting process utilizing a rational‐designed supramolecular hydrogel as the quasi‐solid precursor. The low‐dimensional building blocks within the hydrogel, enclosed in a dense hydrogen‐bonded network, effectively mitigate secondary agglomeration caused by ice crystallization and concentration enrichment during freeze‐casting. By forming a topologically elastic cellular skeleton with an interconnected nanoparticle network, the resulting aerogels exhibit exceptional mechanical elasticity retaining over 98% height after 10 000 compression cycles, along with superior electrical properties showing a 78.9% increase in conductivity compared to conventional freeze‐casting aerogels. Wearable piezoresistive sensors with these aerogels demonstrate outstanding force sensing capabilities, showing a broad linear range (0–17.6 kPa) and high sensitivity (1.32 kPa−1). When integrated as an intermediate layer in protective garments, these sensors offer exceptional insulation and fire resistance, enabling them to endure harsh conditions like repetitive extreme deformations, exposure to high‐temperature flames, and water‐erosion damages.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This pronounced difference was attributed to the unique directional pore structure, which exhibited strong anisotropy, resulting in higher compressive stress under the same strain. 54,55”
From Gradient-structured directional porous floatable aerogels for effective solar-driven hydrogen production and steam generation (2025) · cites this paper as [54]
Citations
Cites
Wearable Pressure Sensors for Pulse Wave Monitoring
Meng, K., Xiao, X., Wei, W., Chen, G., Nashalian, A., Shen, S., Xiao, X., & Chen, J. (2022) · Advanced Materials · doi:10.1002/adma.202109357 · Cited by 878
Liu, H., Xu, T., Cai, C., Liu, K., Liu, W., Zhang, M., Du, H., Si, C., & Zhang, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202113082 · Cited by 571
Shi, J., Wang, L., Dai, Z., Zhao, L., Du, M., Li, H., & Fang, Y. (2018) · Small · doi:10.1002/smll.201800819 · Cited by 507
Bae, G. Y., Han, J. T., Lee, G., Lee, S., Kim, S. W., Park, S., Kwon, J., Jung, S., & Cho, K. (2018) · Advanced Materials · doi:10.1002/adma.201803388 · Cited by 415
Hegde, C., Su, J., Tan, J. M. R., He, K., Chen, X., & Magdassi, S. (2023) · ACS Nano · doi:10.1021/acsnano.3c04089 · Cited by 384
Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly
Qin, H., Zhang, Y., Jiang, J., Wang, L., Song, M., Bi, R., Zhu, P., & Jiang, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106269 · Cited by 340
Shi, Z., Meng, L., Shi, X., Li, H., Zhang, J., Sun, Q., Liu, X., Chen, J., & Liu, S. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00874-w · Cited by 282
Porous Conductive Textiles for Wearable Electronics
Ding, Y., Jiang, J., Wu, Y., Zhang, Y., Zhou, J., Zhang, Y., Huang, Q., & Zheng, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00507 · Cited by 269
Xu, J., Zhang, X., Zhao, Z., Hu, H., Li, B., Zhu, C., Zhang, X., & Chen, Y. (2021) · Small · doi:10.1002/smll.202102032 · Cited by 253
Kong, L., Li, W., Zhang, T., Ma, H., Cao, Y., Wang, K., Zhou, Y., Shamim, A., Zheng, L., Wang, X., et al. (2024) · Advanced Materials · doi:10.1002/adma.202400333 · Cited by 227
Research works printed but not linked: 2
- Zhao X. Y., 2023, Adv. Compos. Hybrid Mater., 6
- Zhao X. Y., 2023, Adv. Compos. Hybrid Mater., 6
Cited by
Wen, Y., Tan, J., Xie, Q., Ren, Z., Yang, Y., Liu, J., Xu, F., Zhang, S., & Cheng, S. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202519509 · Cited by 19
Self-citationDirectional freeze-casting of aerogels: Structure, properties, and applications
Luo, P., Zhang, X., Yue, Y., Wang, Z., Shi, C., & Lyu, Z. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101173 · Cited by 21
Bashir, A., Li, Z. Y., Usman, A., Tang, C.-Y., Tsui, C. P., Chen, Y., Liu, C., Qiao, J., Bai, S., Lin, C., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.75807 · Cited by 18
“Importantly, the controlled compressibility of the lamellar structure enhances interfacial conformity under mounting pressure, reducing thermal contact resistance while preserving continuous through-plane heat-conduction pathways [20].”
Lü, H., Xie, H., Chen, G., Zhang, J., Zhu, B., Zhou, B., Lai, X., Li, H., & Zeng, X. (2025) · Materials Horizons · doi:10.1039/d5mh01282a · Cited by 11
Shi, C., Zheng, R., Yue, Y., Wu, M., Li, P., Fan, L., Guo, C., Zhang, X., Luo, P., Zhang, J., et al. (2025) · Nanoscale Horizons · doi:10.1039/d5nh00359h · Cited by 10
Ren, J., Peng, J., Guo, M., Li, J., Mu, Z., Cheng, C., Gao, M., Li, Q., & Li, Z. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.172323 · Cited by 12
Wang, Y., Liu, Y., Yuan, M., Lei, D., Miao, Y., Zeng, M., Zhang, C., Willenbacher, N., & Liu, T. X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202526288 · Cited by 8
Self-citationLv, X., Yang, Q., Ding, Y., Liu, J., Zong, J., Zang, X., Wang, X.-D., & Li, S. (2025) · Journal of Materials Chemistry A · doi:10.1039/d5ta06348e · Cited by 6
Zhou, K., Fang, Z., Wang, S., Liu, Y. E., Xu, Z., & Liu, H. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174883 · Cited by 4
Wang, Z., Zhao, Y., Zhai, N., Hu, R., Dang, C., Luo, G., Huang, J., Liu, J., Ji, G., & Zhai, W. (2026) · Advanced Functional Materials · doi:10.1002/adfm.75361 · Cited by 4
“…traditional MA materials (such as carbon fibers [4], ceramics [5], and resin composites [6]) are generally brittle and inflexible, facing limitations on environmental adaptability, resulting in unreliability in both physical and electromagnetic integrity under the harsh marine environment [7, 8].”
Self-citationProgrammable Assembly of Hierarchical 3D Aerogel
Ji, Y., Chen, Z., Si, Y., Tanwei, M., Wang, S., Cao, S., Liu, B., Wu, G., & He, D. (2025) · Small · doi:10.1002/smll.202503979 · Cited by 3
Luo, Q., Gao, F., Liu, Z., Liu, T., Zhang, S., Luo, B., Cai, C., Wang, J., Liu, Y., Bai, Y., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-71965-0 · Cited by 4
Self-citationQin, K., Zhang, D., Feng, Q., Du, Z., Cao, C., & Ge, J. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.106423 · Cited by 3
Fu, M., Wang, H., Xu, L., & Li, K. (2025) · AIP Advances · doi:10.1063/5.0289076 · Cited by 2
Wang, S., Hu, L., Pu, M., Xu, M., Zhou, T., Rao, H., Li, X., Ma, X., Su, G., & Luo, X. (2026) · Advanced Science · doi:10.1002/advs.202522686 · Cited by 2
“…such as double-network (DN) approach [ 14, 20 ], ionic cross-linking [ 21, 22 ], Hofmeister effect [ 23, 24 ], solvent exchange [ 25, 26 ], molecular chain entanglement [ 27, 28 ], and freeze-casting techniques [ 29, 30 ] have been explored to enhance the mechanical properties of the hydrogels.”
Su, X., Bao, Y., Tang, Z., Shahzad, A., Luo, Y., Zeng, X., Liang, Z., Wu, Y., Shu, L., Zhu, R., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.176628 · Cited by 2
Kim, B. J., Jung, Y., Chae, S., Jang, S., Kim, J.-O., Jung, S. Y., Kwon, S. H., Kim, J. H., Park, M., Lee, J., et al. (2026) · Carbon · doi:10.1016/j.carbon.2026.121932 · Cited by 3
Lv, Y. A., Xu, H., Xiao, P., Zhang, Z., Li, Z., Yang, W., Li, Y., Yu, T., & Li, Q. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.175832 · Cited by 2
A high-strength, tough, and conductive nanocomposite hydrogel for flexible sensing applications
Cao, S., Yang, Y., Hu, Q., Feng, P., & Jing, X. (2026) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2026.118204 · Cited by 2
Yang, T., Zhang, X., Liu, H., Song, Y., Shi, K., Liu, Q., & Wu, G. (2026) · Advanced Functional Materials · doi:10.1002/adfm.77719 · Cited by 1
Shen, J., Lu, L., Cui, B., Guo, L., Zou, F., Kang, X., Gao, W., Liu, X., & Zhang, Z. (2026) · Small · doi:10.1002/smll.74878
Li, S., Liu, J., Zhao, M., Wang, Q., Zhang, J., Wang, X., Yu, Z., & Li, X. Y. (2026) · Angewandte Chemie · doi:10.1002/ange.8034701
Li, S., Liu, J., Zhao, M., Wang, Q., Zhang, J., Wang, X., Yu, Z., & Li, X. Y. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.8034701
Chen, X., Zou, F., Mu, J., Chen, Z., Bo, Y., Liu, Z. B., Dong, S., Liu, C. X., Chen, Y., Weng, Z., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.76784 · Cited by 1
Lian, M., & Du, H. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.6c01902
Self-citationZhu, L., Xu, H., Yu, W., Bing, N., & Song, M. (2026) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2026.114582
Engineering Firefighters’ Thermal Protective Clothing with Nanotechnology: A State-of-the-Art Review
Chowdhury, I. Z., Nandi, S., Islam, M. M., Ramesh, S., Petrova, A., Boorady, L. M., & Mandal, S. (2026) · Textiles · doi:10.3390/textiles6030101
Elastic PVDF-HFP-Based Aerogel for Efficient Passive Radiative Cooling and Thermal Insulation
Kong, Y., Lai, Z., Dai, X., Xu, F., & Shen, X. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c09512
Self-citationRen, C., Ni, X., Hou, L., Guo, S., & Zheng, Y. H. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c08856
Ren, C., Li, Y., Wang, Y., Li, G., Ni, X., Hou, L., & Guo, S. (2026) · Gels · doi:10.3390/gels12090806
“Zhu et al. [63] developed a gelation-constrained freeze-casting strategy for fabricating aerogels with anisotropic cellular structures.”
Self-citationZeng, X., Ding, Z., He, J., Zou, L., Fan, Y., 张贵冰, & Li, Y. V. (2026) · Small · doi:10.1002/smll.76056
Liu, D., Ding, Z., Yan, H., Nie, Y., Li, J., Zhang, J., Xin, B., & Chen, Z. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c12575
Metadata
- Authors
- Zhu, T., Wang, D., Wang, Y., Xu, F., Huang, J., Lian, M., Wang, Y., Fan, W., Miao, Y., Zhu, J., Nguyen, D. H., Zhang, C., & Liu, T.
- Affiliations
- Donghua University (CN)
- University of Science and Technology of China (CN)
- State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai 201620 China
- Jiangnan University (CN)
- Vietnam Academy of Science and Technology (VN)
- Corresponding author
- Fan, Wei
- Zhang, Chao
- Liu, Tianxi
- ORCID
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2025-03-18
- Volume
- 35
- Issue
- 32
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4408569869
- Semantic Scholar
- 8f382518d2ee8ec6f1ed1b383739ee2ea4e1d01a
- Cited by
- 32
- References
- 54
- Citations by year
- 2026: 22 · 2025: 10
- FWCI
- 8.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Funders
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- freeze casting, nanocomposite aerogels, supramolecular hydrogels, hydrogen bond network, superelasticity, force sensing, electrical conductivity, protective clothing, fire resistance, ice crystal formation, nanoparticle agglomeration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.