Gelation‐Constrained Freeze‐Casting Fabrication of Ultra‐Homogeneous Nanocomposite Aerogels with Superelasticity and Harsh Environment Tolerance
The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
Freeze casting is a versatile technique for organizing low‐dimensional building blocks into ordered porous structural materials. However, the freeze‐casting fabrication of porous materials with a robust and topologically elastic skeleton to withstand harsh conditions is challenging. Herein, a silanized ultra‐homogeneous nanocomposite aerogel is fabricated using a gelation‐constrained freeze‐casting strategy. Diverging from traditional freeze‐casting methods employing a solution precursor, the approach involves a gelation‐constrained freeze‐casting process utilizing a rational‐designed supramolecular hydrogel as the quasi‐solid precursor. The low‐dimensional building blocks within the hydrogel, enclosed in a dense hydrogen‐bonded network, effectively mitigate secondary agglomeration caused by ice crystallization and concentration enrichment during freeze‐casting. By forming a topologically elastic cellular skeleton with an interconnected nanoparticle network, the resulting aerogels exhibit exceptional mechanical elasticity retaining over 98% height after 10 000 compression cycles, along with superior electrical properties showing a 78.9% increase in conductivity compared to conventional freeze‐casting aerogels. Wearable piezoresistive sensors with these aerogels demonstrate outstanding force sensing capabilities, showing a broad linear range (0–17.6 kPa) and high sensitivity (1.32 kPa−1). When integrated as an intermediate layer in protective garments, these sensors offer exceptional insulation and fire resistance, enabling them to endure harsh conditions like repetitive extreme deformations, exposure to high‐temperature flames, and water‐erosion damages.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“This pronounced difference was attributed to the unique directional pore structure, which exhibited strong anisotropy, resulting in higher compressive stress under the same strain. 54,55”
From Gradient-structured directional porous floatable aerogels for effective solar-driven hydrogen production and steam generation (2025) · cites this paper as [54]
Citations
Cites
Wearable Pressure Sensors for Pulse Wave Monitoring
Meng, K., Xiao, X., Wei, W., Chen, G., Nashalian, A., Shen, S., Xiao, X., & Chen, J. (2022) · Advanced Materials · doi:10.1002/adma.202109357 · Cited by 878
Liu, H., Xu, T., Cai, C., Liu, K., Liu, W., Zhang, M., Du, H., Si, C., & Zhang, K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202113082 · Cited by 571
Shi, J., Wang, L., Dai, Z., Zhao, L., Du, M., Li, H., & Fang, Y. (2018) · Small · doi:10.1002/smll.201800819 · Cited by 507
Bae, G. Y., Han, J. T., Lee, G., Lee, S., Kim, S. W., Park, S., Kwon, J., Jung, S., & Cho, K. (2018) · Advanced Materials · doi:10.1002/adma.201803388 · Cited by 415
Hegde, C., Su, J., Tan, J. M. R., He, K., Chen, X., & Magdassi, S. (2023) · ACS Nano · doi:10.1021/acsnano.3c04089 · Cited by 384
Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly
Qin, H., Zhang, Y., Jiang, J., Wang, L., Song, M., Bi, R., Zhu, P., & Jiang, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106269 · Cited by 340
Shi, Z., Meng, L., Shi, X., Li, H., Zhang, J., Sun, Q., Liu, X., Chen, J., & Liu, S. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00874-w · Cited by 282
Porous Conductive Textiles for Wearable Electronics
Ding, Y., Jiang, J., Wu, Y., Zhang, Y., Zhou, J., Zhang, Y., Huang, Q., & Zheng, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00507 · Cited by 269
Xu, J., Zhang, X., Zhao, Z., Hu, H., Li, B., Zhu, C., Zhang, X., & Chen, Y. (2021) · Small · doi:10.1002/smll.202102032 · Cited by 253
Kong, L., Li, W., Zhang, T., Ma, H., Cao, Y., Wang, K., Zhou, Y., Shamim, A., Zheng, L., Wang, X., et al. (2024) · Advanced Materials · doi:10.1002/adma.202400333 · Cited by 227
He, K., Wang, C., He, Y., Su, J., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00527 · Cited by 200
Zhou, S., Apostolopoulou-Kalkavoura, V., Tavares da Costa, M. V., Bergström, L., Strømme, M., & Xu, C. (2020) · Nano-Micro Letters · doi:10.1007/s40820-019-0343-4 · Cited by 199
Shi, X., Fan, X., Zhu, Y., Liu, Y., Wu, P., Jiang, R., Wu, B., Wu, H.-A., Zheng, H., Wang, J., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-28760-4 · Cited by 189
Wearable Aerogels for Personal Thermal Management and Smart Devices
Wu, B., Qi, Q., Liu, L., Liu, Y., & Wang, J. (2024) · ACS Nano · doi:10.1021/acsnano.4c00967 · Cited by 179
Thermal Stability of Cellulose Nanomaterials
D’Acierno, F., Michal, C. A., & MacLachlan, M. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00816 · Cited by 176
Toward an AI Era: Advances in Electronic Skins
Fu, X., Cheng, W., Wan, G., Yang, Z., & Tee, B. C. K. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00049 · Cited by 172
Cao, C.-F., Yu, B., Huang, J., Feng, X.-L., Lv, L.-Y., Sun, F.-N., Tang, L.-C., Feng, J., Song, P., & Wang, H. (2022) · ACS Nano · doi:10.1021/acsnano.2c08368 · Cited by 167
Self-citationAdvances in flexible sensors for intelligent perception system enhanced by artificial intelligence
Niu, H., Yin, F., Kim, E., Wang, W., Yoon, D., Wang, C., Liang, J., Li, Y., & Kim, N. (2023) · InfoMat · doi:10.1002/inf2.12412 · Cited by 165
Hu, P., Wu, F., Ma, B., Luo, J., Zhang, P., Tian, Z., Wang, J., & Sun, Z. (2024) · Advanced Materials · doi:10.1002/adma.202310023 · Cited by 161
Hou, X., Chen, J., Chen, Z., Yu, D., Zhu, S., Liu, T., & Chen, L. (2024) · ACS Nano · doi:10.1021/acsnano.4c00347 · Cited by 161
Self-citationDurable superhydrophobic surface in wearable sensors: From nature to application
Dai, Z., Lei, M., Ding, S., Zhou, Q., Ji, B., Wang, M., & Zhou, B. (2023) · Exploration · doi:10.1002/exp.20230046 · Cited by 157
Mechanoluminescent-Triboelectric Bimodal Sensors for Self-Powered Sensing and Intelligent Control
Zhou, B., Liu, J., Huang, X. M., Qiu, X., Yang, X., Shao, H., Tang, C., & Zhang, X. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01054-0 · Cited by 150
Zhou, M. R., Chen, D., Chen, Q., Chen, P., Song, G., & Chang, C. (2024) · Advanced Materials · doi:10.1002/adma.202312220 · Cited by 150
Li, Y., Zhang, W., Zhao, C., Li, W., Dong, E., Xu, M., Huang, H., Yang, Y., Li, L., Zheng, L., et al. (2024) · Advanced Materials · doi:10.1002/adma.202405405 · Cited by 145
New Carbon Materials for Multifunctional Soft Electronics
Xue, J., Liu, D., Li, D., Hong, T., Li, C., Zhu, Z., Sun, Y., Gao, X., Guo, L., Shen, X., et al. (2024) · Advanced Materials · doi:10.1002/adma.202312596 · Cited by 132
Li, D., Bu, X., Xu, Z., Luo, Y., & Bai, H. (2020) · Advanced Materials · doi:10.1002/adma.202001222 · Cited by 111
Zhang, X., Hu, Z., Sun, Q., Liang, X., Gu, P., Huang, J. D., & Zu, G. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202213952 · Cited by 108
Self-citationZhao, H., Zhang, Y., Han, L., Qian, W., Wang, J., Wu, H., Li, J., Dai, Y., Zhang, Z., Bowen, C., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01216-0 · Cited by 104
Liu, Y., Zhang, S., Li, L., & Li, N. (2024) · Advanced Fiber Materials · doi:10.1007/s42765-024-00388-7 · Cited by 101
Highly cross-linked carbon tube aerogels with enhanced elasticity and fatigue resistance
Zhuang, L., Lu, D., Zhang, J., Guo, P., Su, L., Qin, Y., Zhang, P., Xu, L., Niu, M., Peng, K., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38664-6 · Cited by 91
Dong, J., Hou, J., Peng, Y., Zhang, Y., Liu, H., Long, J., Park, S., Liu, T. X., & Huang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202409071 · Cited by 87
Self-citationAdvanced Design of Soft Robots with Artificial Intelligence
Cao, Y., Xu, B., Li, B., & Fu, H. C. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01423-3 · Cited by 77
Advanced Stretchable Aerogels and Foams for Flexible Electronics and Beyond
Liang, X., Sun, Q., Zhang, X., Hu, Z., Liu, M., Gu, P., Yang, X., & Zu, G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202408707 · Cited by 74
Recent advances in ultrathin materials and their applications in e‐skin
Gao, W., Huang, J., He, J., Zhou, R., Li, Z., Chen, Z., Zhang, Y., & Pan, C. (2023) · InfoMat · doi:10.1002/inf2.12426 · Cited by 61
Self-citationDurukan, M. B., Çiçek, M. Ö., Doğanay, D., Gorur, M. C., Çınar, S., & Ünalan, H. E. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106066 · Cited by 59
Highly Stretchable MXene‐based Meta‐Aerogels with Near‐Zero and Negative Poisson's Ratios
Sun, Q., Zhang, X., Gu, P., Liang, X., Hu, Z., Yang, X., Liu, M., Huang, J. D., & Zu, G. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202308537 · Cited by 55
Self-citationSuperelastic Cellulose Sub‐Micron Fibers/Carbon Black Aerogel for Highly Sensitive Pressure Sensing
Zhang, Y., Zhu, P., Sun, H. X., Sun, X., Ye, Y., & Jiang, F. (2023) · Small · doi:10.1002/smll.202310038 · Cited by 49
Weaving Aerogels into 3D Ordered Hyperelastic Hybrid Carbon Assemblies
Guo, H., Fei, Q., Lian, M., Zhu, T., Fan, W., Li, Y., Sun, L., de Jong, F., Chu, K., Zong, W., et al. (2023) · Advanced Materials · doi:10.1002/adma.202301418 · Cited by 46
Self-citationNanocellulose-based porous lightweight materials with flame retardant properties: A review
Tushar, S. I., Anik, H. R., Uddin, M. M., Mandal, S., Mohakar, V. N., Rai, S., & Sharma, S. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122237 · Cited by 41
Porous Conductive Hybrid Composite with Superior Pressure Sensitivity and Dynamic Range
Stevens, M., Yun, G., & Hasan, T. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202309347 · Cited by 34
Zhang, J., Guo, W., Shen, S., Zhang, Q., Chen, X., Wang, Z., Shao, K., Sun, Q., & Li, C. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c16559 · Cited by 34
Zheng, A., Wan, K., Huang, Y., Ma, Y., Ding, T., Zheng, Y. T., Chen, Z., Feng, Q., & Du, Z. (2024) · Advanced Fiber Materials · doi:10.1007/s42765-024-00460-2 · Cited by 34
3D Nanofabrication via Directed Material Assembly: Mechanism, Method, and Future
Gu, S., Chen, B., Xu, X., Han, F. X., & Chen, S. (2024) · Advanced Materials · doi:10.1002/adma.202312915 · Cited by 33
Defect reduction to enhance the mechanical strength of nanocellulose carbon aerogel
Lai, H., Chen, Z., Zhuo, H., Hu, Y., Zhao, X., Yi, J., Zheng, H., Shi, G., Tong, Y., Meng, L., et al. (2023) · Chinese Chemical Letters · doi:10.1016/j.cclet.2023.108331 · Cited by 27
Xie, M., Qian, G., Ye, Q., Zhang, Y., Wang, M., Deng, Z., Yu, Y., Chen, C., Li, H., & Li, D. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2024.07.095 · Cited by 24
Monolithic polyimine vitrimer/graphene aerogel composites
Zhang, J., Luo, S., Ma, Y., Li, R., Jin, Y., Qiu, L., & Zhang, W. (2022) · Chinese Chemical Letters · doi:10.1016/j.cclet.2022.03.086 · Cited by 23
Hu, S., Zhang, W., Li, S., Wang, Y., Gao, Z., Xia, X., Xiao, H., Zhang, Q., Xu, D., Xu, F., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c10569 · Cited by 22
Self-citationZhang, G., Kong, Y., Wang, L., Nie, S., Liu, X., & Yuan, B. (2024) · Composites Communications · doi:10.1016/j.coco.2024.101854 · Cited by 21
Li, F., Song, J., Niu, Y., Zhang, H., Niederberger, M., & Cheng, W. (2023) · Small · doi:10.1002/smll.202302724 · Cited by 20
Li, X., Niu, D., Xu, P., Yang, W., & Ma, P. (2024) · Composites Communications · doi:10.1016/j.coco.2024.101855 · Cited by 17
Tailoring 3D conductive networks as wearable sensors for pressure or temperature sensing
He, Y., Wang, H., Cao, W., Wang, J., Sun, L., Lin, H., Rui, K., Yan, Y., & Zhu, J. (2024) · Composites Communications · doi:10.1016/j.coco.2024.101985 · Cited by 13
Self-citationZhu, T., Feng, Q., Wan, K., Zhang, C., Li, B., & Liu, T. X. (2022) · Science China Materials · doi:10.1007/s40843-022-2262-7 · Cited by 12
Self-citationChen, W., Li, Y., Yang, T., Gan, L., & Huang, J. (2024) · Composites Communications · doi:10.1016/j.coco.2024.102078 · Cited by 12
Self-citationLiu, Z., Li, H., Zhang, Y., Yuan, W., Meng, C., & Guo, S. (2025) · Composites Communications · doi:10.1016/j.coco.2025.102249 · Cited by 5
Research works printed but not linked: 2
- Zhao X. Y., 2023, Adv. Compos. Hybrid Mater., 6
- Zhao X. Y., 2023, Adv. Compos. Hybrid Mater., 6
Cited by
Wen, Y., Tan, J., Xie, Q., Ren, Z., Yang, Y., Liu, J., Xu, F., Zhang, S., & Cheng, S. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202519509 · Cited by 19
Self-citationDirectional freeze-casting of aerogels: Structure, properties, and applications
Luo, P., Zhang, X., Yue, Y., Wang, Z., Shi, C., & Lyu, Z. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101173 · Cited by 21
Bashir, A., Li, Z. Y., Usman, A., Tang, C.-Y., Tsui, C. P., Chen, Y., Liu, C., Qiao, J., Bai, S., Lin, C., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.75807 · Cited by 18
“Importantly, the controlled compressibility of the lamellar structure enhances interfacial conformity under mounting pressure, reducing thermal contact resistance while preserving continuous through-plane heat-conduction pathways [20].”
Lü, H., Xie, H., Chen, G., Zhang, J., Zhu, B., Zhou, B., Lai, X., Li, H., & Zeng, X. (2025) · Materials Horizons · doi:10.1039/d5mh01282a · Cited by 11
Shi, C., Zheng, R., Yue, Y., Wu, M., Li, P., Fan, L., Guo, C., Zhang, X., Luo, P., Zhang, J., et al. (2025) · Nanoscale Horizons · doi:10.1039/d5nh00359h · Cited by 10
Metadata
- Authors
- Zhu, T., Wang, D., Wang, Y., Xu, F., Huang, J., Lian, M., Wang, Y., Fan, W., Miao, Y., Zhu, J., Nguyen, D. H., Zhang, C., & Liu, T.
- Affiliations
- Donghua University (CN)
- University of Science and Technology of China (CN)
- State Key Laboratory of Advanced Fiber Materials College of Materials Science and Engineering Donghua University Shanghai 201620 China
- Jiangnan University (CN)
- Vietnam Academy of Science and Technology (VN)
- Corresponding author
- Fan, Wei
- Zhang, Chao
- Liu, Tianxi
- ORCID
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2025-03-18
- Volume
- 35
- Issue
- 32
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W4408569869
- Semantic Scholar
- 8f382518d2ee8ec6f1ed1b383739ee2ea4e1d01a
- Cited by
- 32
- References
- 54
- Citations by year
- 2026: 22 · 2025: 10
- FWCI
- 8.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Functional Materials (publishedVersion)
- Funders
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- freeze casting, nanocomposite aerogels, supramolecular hydrogels, hydrogen bond network, superelasticity, force sensing, electrical conductivity, protective clothing, fire resistance, ice crystal formation, nanoparticle agglomeration
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.