The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Engineering of Micro‐ and Nanostructured Surfaces with Anisotropic Geometries and Properties
Abstract
Widespread approaches to fabricate surfaces with robust micro‐ and nanostructured topographies have been stimulated by opportunities to enhance interface performance by combining physical and chemical effects. In particular, arrays of asymmetric surface features, such as arrays of grooves, inclined pillars, and helical protrusions, have been shown to impart unique anisotropy in properties including wetting, adhesion, thermal and/or electrical conductivity, optical activity, and capability to direct cell growth. These properties are of wide interest for applications including energy conversion, microelectronics, chemical and biological sensing, and bioengineering. However, fabrication of asymmetric surface features often pushes the limits of traditional etching and deposition techniques, making it challenging to produce the desired surfaces in a scalable and cost‐effective manner. We review and classify approaches to fabricate arrays of asymmetric 2D and 3D surface features, in polymers, metals, and ceramics. Analytical and empirical relationships among geometries, materials, and surface properties are discussed, especially in the context of the applications mentioned above. Further, opportunities for new fabrication methods that combine lithography with principles of self‐assembly are identified, aiming to establish design principles for fabrication of arbitrary 3D surface textures over large areas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications
Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., & Yan, H. (2003) · Advanced Materials · doi:10.1002/adma.200390087 · Cited by 8,559
Block Copolymers—Designer Soft Materials
Bates, F. S., & Fredrickson, G. H. (1999) · Physics Today · doi:10.1063/1.882522 · Cited by 3,219
Local force and geometry sensing regulate cell functions
Vogel, V., & Sheetz, M. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1890 · Cited by 2,328
Polymer-polymer phase behavior
Bates, F. S. (1991) · Science · doi:10.1126/science.251.4996.898 · Cited by 1,463
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
Deubel, M., von Freymann, G., Wegener, M., Pereira, S., Busch, K., & Soukoulis, C. M. (2004) · Nature Materials · doi:10.1038/nmat1155 · Cited by 1,083
Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures
Cahill, D. G., Goodson, K., & Majumdar, A. (2002) · Journal of Heat Transfer · doi:10.1115/1.1454111 · Cited by 611
Nanoscale cues regulate the structure and function of macroscopic cardiac tissue constructs
Kim, D.-H., Lipke, E. A., Kim, P., Cheong, R., Thompson, S., Delannoy, M., Suh, K.-Y., Tung, L., & Levchenko, A. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0906504107 · Cited by 611
Carbon nanotube-based synthetic gecko tapes
Ge, L., Sethi, S., Ci, L., Ajayan, P. M., & Dhinojwala, A. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0703505104 · Cited by 441
Recent advances in the fabrication and adhesion testing of biomimetic dry adhesives
Sameoto, D., & Menon, C. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/10/103001 · Cited by 157
Cited by
Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
Perspectives on oblique angle deposition of thin films: From fundamentals to devices
Barranco, A., Borras, A., Gonzalez-Elipe, A. R., & Palmero, A. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.06.003 · Cited by 739
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
Nguyen, A. T., Sathe, S. R., & Yim, E. K. F. (2016) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/28/18/183001 · Cited by 310
Lotus effect in wetting and self-cleaning
Zhang, M., Feng, S., Wang, L., & Zheng, Y. (2016) · Biotribology · doi:10.1016/j.biotri.2015.08.002 · Cited by 299
Metadata
- Authors
- Tawfick, S., De Volder, M., Copic, D., Park, S. J., Oliver, C. R., Polsen, E. S., Roberts, M. J., & Hart, A. J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2012-03-06
- Volume
- 24
- Issue
- 13
- Pages
- 1628-1674
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2119158555
- Cited by
- 243
- References
- 9
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.