The DOI matches its Crossref record; 235 of the 235 references it cites were found in a registry or an index.
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
Open accessAbstract
Transfer printing represents a set of techniques for deterministic assembly of micro‐and nanomaterials into spatially organized, functional arrangements with two and three‐dimensional layouts. Such processes provide versatile routes not only to test structures and vehicles for scientific studies but also to high‐performance, heterogeneously integrated functional systems, including those in flexible electronics, three‐dimensional and/or curvilinear optoelectronics, and bio‐integrated sensing and therapeutic devices. This article summarizes recent advances in a variety of transfer printing techniques, ranging from the mechanics and materials aspects that govern their operation to engineering features of their use in systems with varying levels of complexity. A concluding section presents perspectives on opportunities for basic and applied research, and on emerging use of these methods in high throughput, industrial‐scale manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–235 of 235
Synthesis, contact printing, and device characterization of Ni-catalyzed, crystalline InAs nanowires
Ford, A. C., Ho, J. C. Y., Fan, Z., Ergen, O., Altoé, V., Aloni, S., Razavi, H., & Javey, A. (2008) · Nano Research · doi:10.1007/s12274-008-8009-4 · Cited by 76
Soft Lithographic Patterning of Hyaluronic Acid on Hydrophilic Substrates Using Molding and Printing
Suh, K. Y., Khademhosseini, A., Yang, J., Eng, G., & Langer, R. (2004) · Advanced Materials · doi:10.1002/adma.200306180 · Cited by 75
Molecular Transfer Printing Using Block Copolymers
Ji, S., Liu, C., Liu, G., & Nealey, P. F. (2009) · ACS Nano · doi:10.1021/nn901342j · Cited by 75
Superlattice Nanowire Pattern Transfer (SNAP)
Heath, J. R. (2008) · Accounts of Chemical Research · doi:10.1021/ar800015y · Cited by 74
Simple Detachment Patterning of Organic Layers and Its Application to Organic Light‐Emitting Diodes
Choi, J., Kim, D., Yoo, P. J., & Lee, H. H. (2005) · Advanced Materials · doi:10.1002/adma.200400223 · Cited by 73
Yang, Y., Hwang, Y., Cho, H. A., Song, J., Park, S.-J., Rogers, J. A., & Ko, H. C. (2010) · Small · doi:10.1002/smll.201001633 · Cited by 72
Self-citationFano filters based on transferred silicon nanomembranes on plastic substrates
Qiang, Z., Yang, H., Chen, L., Pang, H., Ma, Z., & Zhou, W. (2008) · Applied Physics Letters · doi:10.1063/1.2971199 · Cited by 70
Masterless Soft Lithography: Patterning UV/Ozone−Induced Adhesion on Poly(dimethylsiloxane) Surfaces
Childs, W. R., Motala, M. J., Lee, K. J., et al. (2005) · Langmuir · doi:10.1021/la050011b · Cited by 70
Tunable surface plasmon resonance on an elastomeric substrate
Olçum, S., Kocabaş, A., Ertaş, G., Atalar, A., & Aydınlı, A. (2009) · Optics Express · doi:10.1364/oe.17.008542 · Cited by 68
Fabrication of Organic Light‐Emitting Devices by Low‐Pressure Cold Welding
Kim, C. L., & Forrest, S. R. (2003) · Advanced Materials · doi:10.1002/adma.200390127 · Cited by 67
Hendricks, T. R., Lu, J., Drzal, L. T., & Lee, I. (2008) · Advanced Materials · doi:10.1002/adma.200702672 · Cited by 64
Patterning conductive copper by nanotransfer printing
Felmet, K., Loo, Y., & Sun, Y. (2004) · Applied Physics Letters · doi:10.1063/1.1803916 · Cited by 64
Jung, I., Shin, G., Malyarchuk, V., Ha, J. S., & Rogers, J. A. (2010) · Applied Physics Letters · doi:10.1063/1.3290244 · Cited by 61
Self-citationDevelopment of ultra-high density silicon nanowire arrays for electronics applications
Wang, D., Sheriff, B. A., McAlpine, M. C., & Heath, J. R. (2008) · Nano Research · doi:10.1007/s12274-008-8005-8 · Cited by 57
Step and Repeat UV nanoimprint lithography tools and processes
McMackin, I., Choi, J., Schumaker, P., et al. (2004) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.538733 · Cited by 56
Wafer-Scale Nanopatterning and Translation into High-Performance Piezoelectric Nanowires
Nguyen, T. D., Nagarah, J. M., Qi, Y. P., Nonnenmann, S. S., Morozov, A. V., Li, S., Arnold, C. B., & McAlpine, M. C. (2010) · Nano Letters · doi:10.1021/nl102619c · Cited by 54
Guo, Q., Teng, X., & Yang, H. W. (2004) · Advanced Materials · doi:10.1002/adma.200400596 · Cited by 53
Yeom, J., & Shannon, M. A. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900686 · Cited by 51
Stretchable metal-elastomer nanovoids for tunable plasmons
Cole, R. M., Mahajan, S., & Baumberg, J. J. (2009) · Applied Physics Letters · doi:10.1063/1.3247966 · Cited by 44
Transfer and Alignment of Random Single-Walled Carbon Nanotube Films by Contact Printing
Liu, H., Takagi, D., Shohei Chiashi, A., & Homma, Y. (2010) · ACS Nano · doi:10.1021/nn901741y · Cited by 41
Yunus, S., de Looringhe, C. D. C., Poleunis, C., & Delcorte, A. (2007) · Surface and Interface Analysis · doi:10.1002/sia.2623 · Cited by 39
Nanogenerators Tap Waste Energy To Power Ultrasmall Electronics
Service, R. F. (2010) · Science · doi:10.1126/science.328.5976.304 · Cited by 32
Contact‐Printed Microelectromechanical Systems
Packard, C. E., Murarka, A., Lam, E. W., Schmidt, M. A., & Bulović, V. (2010) · Advanced Materials · doi:10.1002/adma.200903034 · Cited by 29
Printing of Monolithic Polymeric Microstructures Using Reactive Mesogens
Sánchez‐Somolinos, C., Verbakel, F., Escuti, M. J., Bastiaansen, C. W. M., & Broer, D. J. (2007) · Advanced Materials · doi:10.1002/adma.200700597 · Cited by 26
Micropatterned Porous‐Silicon Bragg Mirrors by Dry‐Removal Soft Lithography
Gargas, D. J., Muresan, O., Sirbuly, D. J., & Buratto, S. K. (2006) · Advanced Materials · doi:10.1002/adma.200601354 · Cited by 24
Patterning a Two-Dimensional Colloidal Crystal by Water-Mediated Particle Transfer Printing
Lee, B. H., Shin, H., & Sung, M. M. (2007) · Chemistry of Materials · doi:10.1021/cm071128j · Cited by 23
Fabrication of Flexible Binary Amplitude Masks for Patterning on Highly Curved Surfaces
Bowen, A. M., & Nuzzo, R. G. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900978 · Cited by 22
Self-citationPrinting of Highly Integrated Crossbar Junctions
Sanetra, N., Karipidou, Z., Wirtz, R., Knorr, N., Rosselli, S., Nelles, G., Offenhäusser, A., & Mayer, D. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101925 · Cited by 17
Lee, K. J., Ahn, H., Motala, M. J., Nuzzo, R. G., Menard, E., & Rogers, J. A. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/7/075018 · Cited by 17
Self-citationPhase Controllable Transfer Printing of Patterned Polyelectrolyte Multilayers
Park, J. S., Cho, S., Han, G. Y., Sim, S. J., Park, J., & Yoo, P. J. (2009) · Langmuir · doi:10.1021/la804038z · Cited by 16
Multifunctional balloon catheters of the future
Slepian, M. J., Ghaffari, R., & Rogers, J. A. (2011) · Interventional Cardiology · doi:10.2217/ica.11.50 · Cited by 15
Self-citationAdvancing Decal-Transfer Lithography with a Reusable PDMS-Coated Nanoscale Stamp
Kim, M., & Kim, Y. S. (2007) · Journal of the American Chemical Society · doi:10.1021/ja072981m · Cited by 14
Thompson, L. B., Mack, N. H., & Nuzzo, R. G. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b920713a · Cited by 14
Self-citationProtein biochips patterned by microcontact printing or by adsorption-soft lithography in two modes
Wigenius, J. A., Fransson, S., von Post, F., et al. (2008) · Biointerphases · doi:10.1116/1.2988771 · Cited by 10
(2002) · doi:10.1002/1521-3773(20020617)41:12
Cited by
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Molecular-Scale Electronics: From Concept to Function
Xiang, D., Wang, X., Jia, C., Lee, T., & Guo, X. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00680 · Cited by 1,336
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Organic semiconductor crystals
Wang, C., Dong, H., Jiang, L., & Hu, W. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00490g · Cited by 875
Recent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Metadata
- Authors
- Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2012-08-31
- Volume
- 24
- Issue
- 39
- Pages
- 5284-5318
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2146538427
- Cited by
- 917
- References
- 235
- FWCI
- 22.15
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.