Structured Organic–Inorganic Perovskite toward a Distributed Feedback Laser
Open accessThe DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
A general strategy for the in-plane structuring of organic-inorganic perovskite films is presented. The method is used to fabricate an industrially relevant distributed feedback (DFB) cavity, which is a critical step toward all-electrially pumped injection laser diodes. This approach opens the prospects of perovskite materials for much improved optical control in LEDs, solar cells, and also toward applications as optical devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The modal net gain coefficient is therefore ~70 cm -1 , which is in the range reported in [28]: 40-250 cm -1 , and led to lasing despite very high propagation losses in the perovskite waveguide.”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [28]
In the citing paper
“The lasing threshold of the fabricated lasers is 4.7 µ J/cm -2 , which is lower than in unstructured materials.”
From Monolithically Integrated Perovskite Semiconductor Lasers on Silicon Photonic Chips by Scalable Top-Down Fabrication (2018) · cites this paper as [19]
In the citing paper
“which is one of the lowest reported values for polycrystalline perovskites lower than in devices made of unprocessed perovskites 19,23”
From Monolithically Integrated Perovskite Semiconductor Lasers on Silicon Photonic Chips by Scalable Top-Down Fabrication (2018) · cites this paper as [19]
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationStranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationSequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Self-citationLong-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Self-citationLow-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Research works printed but not linked: 1
- Yang W. S., 2015, Science
Cited by
Items 201–297 of 297
Cerrillo, J. G., Corpus-Mendoza, A. N., Moreno‐Romero, P. M., Hernández-Granados, A., & Hu, H. Z. (2017) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2017.08.027 · Cited by 13
Progress in semiconductor quantum dots-based continuous-wave laser
Wang, L., Dai, G. Z., Deng, L., & Zhong, H. (2020) · Science China Materials · doi:10.1007/s40843-020-1336-6 · Cited by 14
Micro–Nanostructure‐Assisted Luminescence in Perovskite Devices
Tang, Y., Shen, Y., Wang, J., Qian, X., Guo, M., Li, Y., & Tang, J. (2021) · Small Structures · doi:10.1002/sstr.202100084 · Cited by 14
Self-citationHigh-Efficiency Linearly Polarized Organic Light-Emitting Diodes
Dong, Q., Zhu, L., Yin, S., Lei, L., Gündoğdu, K., & So, F. F. (2023) · ACS Photonics · doi:10.1021/acsphotonics.3c00812 · Cited by 13
Four‐Dimensional Design Space of High‐Q Second‐Order Distributed Feedback Perovskite Lasers
Annavarapu, N., Goldberg, I., Hamdad, S., Elkhouly, K., Puybaret, R., Tezcan, D. S., Genoe, J., Gehlhaar, R., & Heremans, P. L. (2024) · Advanced Optical Materials · doi:10.1002/adom.202302496 · Cited by 12
Role of PMMA to make MAPbI3 grain boundary heat-resistant
Ava, T. T., Jeong, H. J., Yu, H. M., Lee, K. S., Abdel‐Fattah, T. M., Jeong, M. S., & Namkoong, G. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.149852 · Cited by 12
Directing random lasing emission using cavity exciton-polaritons
Bouteyre, P., Nguyen, H. S., Lauret, J., Trippé-Allard, G., Delport, G., Lédée, F., Diab, H., Belarouci, A., Seassal, C., Garrot, D., et al. (2020) · Optics Express · doi:10.1364/oe.410249 · Cited by 13
Wu, X., Li, Y., Li, W., Wu, L., Fu, B., Wang, W., Liu, G., Zhang, D., Zhao, J., & Chen, P. (2018) · Crystals · doi:10.3390/cryst8030124 · Cited by 11
Low-Temperature Discrimination of Defect States by Exciton Dynamics in Thin-Film MAPbBr3 Perovskite
Hu, J., Zhang, Y., & Zhang, X. (2022) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.2c01625 · Cited by 10
Plasmon-Enhanced Blue-Light Emission of Stable Perovskite Quantum Dot Membranes
Gu, K., Peng, H., Hua, S., Qu, Y., & Yang, D. (2019) · Nanomaterials · doi:10.3390/nano9050770 · Cited by 12
“Recently, MAPbX3 QDs has become a promising candidate in breaking through the short-term stability and gain important positions in many light-emitting applications such as light-emitting diodes (LEDs), lasers and light-emitting transistors [9,10].”
BackgroundLiu, R., Chen, W., Liu, L., Lu, Y., Li, W., Fu, T., Liu, X., Hang, X., & Sun, Z. (2021) · Applied Physics Letters · doi:10.1063/5.0056102 · Cited by 10
Distributed Feedback Laser Based on Single Crystal Perovskite
Sun, S., Xiao, S., & Song, Q. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/844/1/012022 · Cited by 10
Laser‐Induced Recoverable Fluorescence Quenching of Perovskite Films at a Microscopic Grain Scale
Xiang, Y., Cao, Y., Yang, W., Hu, R., Wood, S., Li, B., Hu, Q., Zhang, F., He, J., Yavari, M., et al. (2021) · Energy & environment materials · doi:10.1002/eem2.12231 · Cited by 9
Self-citationTunable polymer lasers based on metal-dielectric hybrid cavity
Chen, C., Tong, F. M., Cao, F., Tong, J., Zhai, T., & Zhang, X. (2018) · Optics Express · doi:10.1364/oe.26.032048 · Cited by 9
Kim, S. M., Naqvi, S. D. H., Kang, M. G., Song, H., & Ahn, S. (2022) · Nanomaterials · doi:10.3390/nano12060932 · Cited by 10
Emission Control in Metal Halide Perovskite Lasers
Wang, K., Huang, C., Ruan, Q., Zhou, Y., Chen, Y., Liu, H., Xiao, S., & Song, Q. (2023) · ACS Photonics · doi:10.1021/acsphotonics.2c01658 · Cited by 9
Meyers, J. K., Serafin, L. Y., Orr, A. D., McKinney, C., & Cahoon, J. F. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00495 · Cited by 9
Electrically Switchable Amplified Spontaneous Emission from Lead Halide Perovskite Film
Liu, P., Gu, C., & Liao, Q. (2021) · ACS Omega · doi:10.1021/acsomega.1c05364 · Cited by 9
Facile anion-exchange reaction in mixed-cation lead bromide perovskite nanocrystals
Pisanu, A., Quadrelli, P., & Malavasi, L. (2019) · RSC Advances · doi:10.1039/c9ra01089k · Cited by 9
Shadrokh, Z., Sousani, S., Dehghani, Z., Kabir, N., Mozafarbeigi, A. M., Mrkyvkova, N., Abbasi, A., Abdi, Y., Šiffalovič, P., Majková, E., et al. (2025) · Optical Materials · doi:10.1016/j.optmat.2025.116771 · Cited by 8
Synthesis of Perovskite Nanowires and Their Application for Photodetectors
Guo, J., Wang, C., Zhao, X., Hu, G., Zhang, X., Jiang, J., Wei, W., & Shen, L. (2025) · Advanced Science · doi:10.1002/advs.202510428 · Cited by 13
Ionic Solvent-Assisted MAPbBr3 Perovskite Film for Two-Photon Pumped Single-Mode Laser
Zhan, Z., Hu, Z., Huang, S., Dong, S., Li, Q., Liu, Z., Du, J., & Leng, Y. (2023) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.3c01959 · Cited by 8
Quinn, X. L., Kumar, R. E., Kodur, M., Cakan, D. N., Cai, Z., Zhou, T., Holt, M. V., & Fenning, D. P. (2021) · Advanced Optical Materials · doi:10.1002/adom.202002221 · Cited by 8
Multiple-beam colloidal quantum dot lasers in a waveguide-grating-waveguide microcavity
Liu, F., Yin, T., Liu, Y., Naeem, I., Guo, D., Cui, L., & Zhai, T. (2023) · Applied Physics Letters · doi:10.1063/5.0157969 · Cited by 7
Fan, J., Du, W., Mi, Y., & Liu, X. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814162-5.00003-0 · Cited by 7
CH3NH3PbI3 crystal growth, structure and composition
Anikeeva, V. E., Semenova, O. I., & Tereshchenko, O. E. (2018) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1124/4/041008 · Cited by 7
Emerging materials and applications from thermally evaporated electronic films
Gao, X., Sun, R., Li, Z., Feng, Y., Lin, Z., Hao, Y., Zhu, J. G., & Chang, J. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101077 · Cited by 7
Emerging Device Applications From Strong Light–Matter Interactions in 2D Materials
Janani Archana, K., Shwetabh, K., Ali, R., Velayutham, R., Das, K., Mondal, A., Kumar, P., & Anantharaman, S. B. (2026) · Advanced Science · doi:10.1002/advs.202520976 · Cited by 9
“Using 3D perovskites, a variety of devices, including vertical-cavity surface-emitting lasers (VCSELs) [ 221 ], distributed feedback (DFB) lasers [ 222 ], and whispering-gallery mode (WGM) lasers [ 223 ] have been extensively explored [ 27 ].”
Wang, Y., Zhang, Y., Liu, Y., Pang, T., Hu, Z., Zhu, Y., Luan, S., & Jia, R. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa8fa7 · Cited by 6
Phenomenological mechanisms of hybrid organic–inorganic perovskite thin film deposition by RIR-MAPLE
Barraza, E. T., & Stiff‐Roberts, A. D. (2020) · Journal of Applied Physics · doi:10.1063/5.0015962 · Cited by 6
Metal-halide perovskite-based edge emitting lasers
Basak, S., Bar‐On, O., & Scheuer, J. (2021) · Optical Materials Express · doi:10.1364/ome.443294 · Cited by 6
Preparation of Waterproof Organometal Halide Perovskite Photonic Crystal Beads
Chen, K., Schünemann, S., & Tüysüz, H. (2017) · Angewandte Chemie · doi:10.1002/ange.201702556 · Cited by 7
Son, S. Y., Kang, G., Kim, M., Lee, J., Kim, T., Park, T., & Lim, J. (2019) · Nanoscale · doi:10.1039/c8nr10075f · Cited by 5
Xu, W.-L., Ding, C., Niu, M.-S., Yang, X., Zheng, F., Jin, X., Zheng, M., & Hao, X. (2020) · Organic Electronics · doi:10.1016/j.orgel.2020.105663 · Cited by 5
Zhou, H., Liu, W., Chang, R., Huang, Z., Sha, X., Chen, G., Reichmanis, E., & Song, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06893 · Cited by 5
Gong, Q., Zhang, W., He, J., Ma, F., Song, L., Cheng, L., Zhang, J., Wang, L., & Hu, Y. (2022) · Optics Express · doi:10.1364/oe.479422 · Cited by 5
Khan, Z., Hussain, Z., Liaqat, M. A., Fahad, S., & Ahmed, S. (2019) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-019-00716-3 · Cited by 5
P‐92: Low‐Power Perovskite Photodetector Based on ZnO/CsPbBr 3 /TFB Heterojunction
Yan, S., Tang, S., & Li, Q. (2020) · SID Symposium Digest of Technical Papers · doi:10.1002/sdtp.14229 · Cited by 5
Chang, Y., Li, J., Lv, X., Yu, Y., Xie, Y., Yang, J., Xie, X. L., Zhou, C., Liu, L., Li, Z., et al. (2025) · Rare Metals · doi:10.1002/rar2.70099 · Cited by 4
Highly Stable Solution‐Processed CsZnPbI 3 Perovskite Distributed Feedback Lasers
Majeed, A., Vaitkevičius, A., Stanionytė, S., Miasojedovas, S., Kreiza, G., & Ščajev, P. (2025) · Advanced Optical Materials · doi:10.1002/adom.202501896 · Cited by 5
Dual-band lasing from ZnO/CsPbBr 3 core/shell microcavity
Zhang, W., Xu, C., You, D., Wang, R., Chen, F., Liu, W., Shi, Z., & Cui, Q. (2019) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ab3fbd · Cited by 4
EA-Directing Formamidinium-Based Perovskite Microwires with A-Site Doping
Shan, X., Ding, X., Shi, H., Zhang, X., Sun, X. W., Ji, N., Zhang, Z., & Zhang, Z. (2021) · ACS Omega · doi:10.1021/acsomega.1c00213 · Cited by 4
Upside-Down Molding Approach for Geometrical Parameter-Tunable Photonic Perovskite Nanostructures
Nie, L., Ng, W. K., Liang, Z., Ren, X., Yang, T., Mei, G., Leung, C. W., Wong, K. S., & Choy, W. C. H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02318 · Cited by 4
Wang, T., & Zhang, X. (2017) · Optics Communications · doi:10.1016/j.optcom.2017.01.048 · Cited by 4
Kumari, S., Meena, A., Singh, A., & Verma, A. S. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-12087-y · Cited by 4
Low‐threshold and narrow‐linewidth perovskite microlasers pumped by a localized waveguide source
Liu, H., Yu, H., Dai, L., Li, Z., & Chen, J. (2021) · Nanophotonics · doi:10.1515/nanoph-2021-0280 · Cited by 4
Roh, K., Lee, J. L., Dang, C., & Nurmikko, A. V. (2016) · Optical Materials Express · doi:10.1364/ome.6.003776 · Cited by 4
Perovskite lasers: From optical pumping to electrical pumping
Wang, K., Vasilopoulou, M., Alshahrani, T. M., Ryu, I., bin Jasmin, M. F., bin Zulkifli, M. D. D., bin Kamaruzaman, A. M., bin Jakariah, M. N., Gao, P., Yusoff, A. R. B. M., et al. (2026) · FlexMat. · doi:10.1002/flm2.70048 · Cited by 4
Thawarkar, S. R., Rondiya, S. R., Rana, P. J. S., Narayan, R., Dzade, N. Y., & Singh, S. P. (2021) · Functional Materials Letters · doi:10.1142/s1793604721500089 · Cited by 3
Water-Recycled Perovskite for White Light-Emitting Diodes
Chen, R., Xu, C., Wang, R., Guo, H., You, D., Li, Z., Wang, X., Shi, Z., & Cui, Q. (2021) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.1c00485 · Cited by 3
Simulation of coupling optical modes in 1D photonic crystals for optoelectronic applications
Le, N. D., & Nguyen-Tran, T. (2020) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.008 · Cited by 4
Thick-Shell Core/Shell Quantum Dots
Zhang, L., Xiang, W., & Zhang, J. (2020) · Lecture notes in nanoscale science and technology · doi:10.1007/978-3-030-46596-4_6 · Cited by 3
Polarization-dependent direct laser nanostructuring of halide perovskites
Zhizhchenko, A. Y., Cherepakhin, A. B., Mitsai, E. V., Li, X., Zou, X., Mezenov, Y. A., Kuchmizhak, A. A., & Makarov, S. (2025) · Photonics and Nanostructures - Fundamentals and Applications · doi:10.1016/j.photonics.2025.101408 · Cited by 2
Khan, M. N., & Almohammedi, A. (2022) · Materials Science-Poland · doi:10.2478/msp-2022-0006 · Cited by 2
Stimulated emission mechanisms in perovskite semiconductors
Suárez, I. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00017-9 · Cited by 3
Lim, H. S., Lee, S., Jeong, H. Y., Lee, N. E., & Cho, S. O. (2020) · Optical Materials · doi:10.1016/j.optmat.2020.110016 · Cited by 2
Zhang, J., & Zhang, X. (2017) · Micro & Nano Letters · doi:10.1049/mnl.2017.0082 · Cited by 2
Towards nano-patterned perovskite layers for enhanced absorption in solar cells
Schmager, R., Abzieher, T., Brenner, P., Assadillayev, A., Lee, D. J., Moghadamzadeh, S., Hossain, I. M., Lemmer, U., Richards, B. S., & Paetzold, U. W. (2018) · World Conference on Photovoltaic Energy Conversion · doi:10.1109/pvsc.2018.8548029 · Cited by 2
“Compared to pre-patterning of the substrate, this method reduces the final roughness of the perovskite active medium [6], [7].”
MethodLasing from MEH-PPV with a refractive index tunable by electron irradiation
Lim, H. S., Lee, J. H., Jeong, H. Y., & Cho, S. O. (2021) · Optics Express · doi:10.1364/oe.427396 · Cited by 2
A-site composition tuning in methylammonium-based metal halide perovskite colloidal nanocrystals
Mondal, S., Sharma, G., Bhoi, S., Wadepalli, S., Santra, P. K., Saha, D., & Hazarika, A. (2024) · Nanoscale · doi:10.1039/d4nr03422h · Cited by 1
Control of Stimulated Emission of Tin Perovskites through Polymeric Diffractive Gratings
Martínez‐Pastor, J. P., Sánchez‐Díaz, J., Villalvilla, J. M., Soriano‐Díaz, S., Quintana, J. A., Mora‐Seró, I., Díaz‐García, M. A., & Suárez, I. (2025) · ACS Photonics · doi:10.1021/acsphotonics.5c00471 · Cited by 1
Rao, Z., Jiang, B., Hao, Y., Yang, W., & Hong, R. (2026) · Solar RRL · doi:10.1002/solr.202500906 · Cited by 1
“This has extended the scope of such perovskites towards lasing [12, 13], light emitting devices [14], plasmonics [15], solar cells [16 – 18], photodetectors [19], and XRD detection [20, 21].”
Wang, Z., Zhang, H., (332111), Y. W., Zhang, L., Wang, L., Zhang, Y., Su, S., Shen, S. G., Wang, X., & Zhu, H. (2026) · Semiconductor Science and Technology · doi:10.1088/1361-6641/ae4d7b · Cited by 1
“In recent optoelectronic applications, corrugated structures have been utilized in devices such as LEDs [18–20] and solar cells [21–23], a strategy aimed at boosting light extraction and quantum efficiency.”
Perovskites – Some Snapshots of Recent Developments
Rhodes, C. J. (2018) · Science Progress · doi:10.3184/003685018x15360899653905 · Cited by 1
Generation of Amplified Spontaneous Emission in Lead Halide Perovskite Semiconductors
Suárez, I., & Martínez‐Pastor, J. P. (2021) · doi:10.1063/9780735423633_007 · Cited by 6
Vertical tubular zinc oxide microcavity enables efficient colloidal quantum dot lasing
Meng, W., Li, W., Zhou, C., Cao, J., & Yang, X. (2023) · Optics Express · doi:10.1364/oe.487723 · Cited by 1
Halide perovskite micro and nano lasers
Wei, Q., Wang, C., & Li, M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00007-6 · Cited by 1
Atomic dynamics on surface structural degradation of perovskite methylammonium lead iodide nanowires
Chen, J., Huang, J., Gan, M., Zhang, Y., Tian, T., & Fei, L. (2024) · Materials Characterization · doi:10.1016/j.matchar.2024.114085 · Cited by 1
Self-citationGu, H., Gao, G., Li, S. X., Wang, J., Jiang, X., Wang, K., & Hu, X. (2024) · Engineering materials · doi:10.1007/978-3-031-57663-8_15 · Cited by 1
Self-citationPerovskite materials: from synthesis to solar energy conversion applications
Imtiyaz, S., Pirzada, B. M., & Qurashi, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95494-5.00011-2 · Cited by 1
P‐111: Self‐Driven Light‐Emitting Diodes Based on Formamidinium Lead Halide Perovskite Nanocrystals
Zhang, X., Ding, R., & Sun, X. W. (2019) · SID Symposium Digest of Technical Papers · doi:10.1002/sdtp.13272 · Cited by 1
P‐9.2: Role of interlayers in inorganic perovskite thin films LEDs
Choi, W., Kanwat, A., Moyen, E., & Jang, J. N. (2019) · SID Symposium Digest of Technical Papers · doi:10.1002/sdtp.13671 · Cited by 1
“They exhibit excellent optoelectronic properties such as high optical absorption, long diffusion lengths for charge carriers, high photoluminescence quantum yields (PLQYs) and their bandgap can be easily tuned.(2,3) These properties make them ideal candidates for the next generation of low cost solar cells, PeLEDs, la…”
BackgroundPump Polarization and Size Effects on the Performance of Polymer Lasers
Chen, C., Han, L., Tong, J., Zhang, X., Zhang, S., & Zhai, T. (2019) · Polymers · doi:10.3390/polym11122031 · Cited by 1
LEDs and Other Electronic Devices Based on Perovskite Materials
Vassilakopoulou, A., & Koutselas, I. B. (2020) · Materials horizons · doi:10.1007/978-981-15-1267-4_10 · Cited by 1
Optical Gain Mechanisms and Fabrication of Perovskite Lasers
Tay, Y. K. E., He, H., Tian, X., Li, M., & Sum, T. C. (2022) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-981-16-7973-5_3 · Cited by 1
Perovskite micro-nano lasers and on-chip integration
Li, H., Li, W., & Chen, J. (2022) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2022-0505 · Cited by 1
Perovskite Materials for Laser Applications
Meng, H. (2023) · Wiley eBooks · doi:10.1002/9783527844951.ch12 · Cited by 1
Design and Fabrication of Perovskite Micro-Cavity Lasers
Ballew, C. (2016) · ResearchWorks at the University of Washington (University of Washington)
Synthesis and Application of Metal Halide Perovskite Nanocrystals
Zhang, X., Xu, B., Wang, K., & Sun, X. W. (2017) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_at.2017.jtu5a.131
Chen, F., Li, Q., Li, M., Zhang, H., Huang, F. C., Li, S., & Zhang, J. (2018) · doi:10.1364/cleopr.2018.w1j.3
“Perovskites are one of the most promising candidates for next-generation on-chip optical sources [1], which can be used as light-emitting diodes (LEDs) [2], lasers [3] and single photon sources [4,5].”
BackgroundToward Electrically Driven Perovskite Lasers – Prospects and Obstacles
Chen, S., & Nurmikko, A. V. (2018) · Wiley eBooks · doi:10.1002/9783527800766.ch3_02
Organometal halide perovskite-based optoelectronic devices
Bu, I. Y. Y. (2019) · WEENTECH Proceedings in Energy · doi:10.32438/wpe.7018
Perovskite Quantum Dots Based Lasing-Prospects and Challenges
Wang, Y., & Xia, S. (2020) · Springer series in materials science · doi:10.1007/978-981-15-6637-0_11
Metal Halide Perovskites for Coherent Light Emission
Wang, K., Gao, X., Qin, C., & Xing, G. (2022) · Wiley eBooks · doi:10.1002/9783527832552.ch16
The Halide Perovskite Gain Media
Tay, Y. K. E., He, H., Tian, X., Li, M., & Sum, T. C. (2022) · SpringerBriefs in applied sciences and technology · doi:10.1007/978-981-16-7973-5_2
Design and Development of Hybrid Halide Perovskites in Laser Devices
Jiang, W. (2022) · Highlights in Science Engineering and Technology · doi:10.54097/hset.v27i.3772
From LEDs to lasing by electrical injection, this is possible for lead halide perovskites?
Ripollés, T. S., Boix, P. P., & Suárez, I. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00004-0
Silver nanocube-assisted random lasing of perovskite materials
Woli, Y. B., Krause, B., & Hoang, T. B. (2025) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-025-15791-y
“So far, researchers have demonstrated optically pumped lasers employing a variety of optical feedback structures, including Fabry–Perot cavities [9, 16, 17], distributed feedback gratings[18], whispering gallery modes [19], and plas-mon-enhanced lasing [20 – 23].”
Ahmad, V. U., & Walter, D. (2025) · Semiconductors and semimetals · doi:10.1016/bs.semsem.2025.09.005 · Cited by 1
Anisotropic Photoluminescence Emission in MoS 2 Enabled by Nanoimprinted Dielectric Gratings
Zhao, X., Guo, S., Tang, Z., Liu, Q., Liu, R., WANG, X., Jiang, Z., & Pan, A. (2026) · ACS Photonics · doi:10.1021/acsphotonics.5c02329
Lasers à pérovskites hybrides halogénées en microcavité
Bouteyre, P. (2019) · theses.fr (ABES) · doi:10.70675/42bf2a2aze3d3z4050zb89cz3212f870f879 · Cited by 3
Berry, F. (2020) · theses.fr (ABES) · doi:10.70675/d76e9870z8597z450az91adzdb620f3b6435 · Cited by 5
Fabrication and characterization of green light-emitting diodes based on halide perovskites
Do, Q.-H. (2023) · theses.fr (ABES) · doi:10.70675/faf31c1czb128z4774za52fz2613d9c2aeba · Cited by 2
Han, K., Jeon, G., Yoo, H., & Ha, N. Y. (2026) · Nano Energy · doi:10.1016/j.nanoen.2026.112017
Smooth CsSnI3 Films for Low-Threshold Optically Pumped Near-Infrared Lasers
Wang, S., Chen, Y., Tao, 倪. N., Li, Z., Ni, K., Chang, J., Peng, Q., & Wang, J. (2026) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6c02043
Self-citationNarrow‐Linewidth Continuous‐Wave Perovskite Nanolasers via Conformal DFB Gratings
Cheng, Z., Cui, Y., Shao, Y., zhao, W., Wen, R., Zheng, K., & Li, G. (2026) · Laser & Photonics Review · doi:10.1002/lpor.72002
Metadata
- Authors
- Saliba, M., Wood, S. M., Patel, J. B., Nayak, P. K., Huang, J., Alexander‐Webber, J. A., Wenger, B., Stranks, S. D., Hörantner, M. T., Wang, J. T., Nicholas, R. J., Herz, L. M., Johnston, M. B., Morris, S. M., Snaith, H. J., & Riede, M. K.
- Affiliations
- University of Oxford (GB)
- Clarendon Laboratory University of Oxford Parks Road Oxford OX1 3PU UK
- Corresponding author
- Snaith, Henry J.
- Riede, Moritz K.
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2015-12-02
- Volume
- 28
- Issue
- 5
- Pages
- 923-929
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2268311649
- Semantic Scholar
- 23864c585567cb27cb0db874f45e95ae67572123
- Cited by
- 297
- References
- 44
- Citations by year
- 2026: 8 · 2025: 13 · 2024: 13 · 2023: 28 · 2022: 22 · 2021: 33 · 2020: 34 · 2019: 35 · 2018: 41 · 2017: 43 · 2016: 27
- FWCI
- 17.84
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Cambridge University Engineering Department Publications Database (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- European Union Seventh Framework Programme (604032)
- Royal Society
- ERSRC
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Keywords
- organic-inorganic hybrid perovskites, distributed feedback lasers, perovskite thin films, injection laser diodes, perovskite light-emitting diodes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.