The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Perovskite Materials for Light‐Emitting Diodes and Lasers
Open accessAbstract
Organic–inorganic hybrid perovskites have cemented their position as an exceptional class of optoelectronic materials thanks to record photovoltaic efficiencies of 22.1%, as well as promising demonstrations of light‐emitting diodes, lasers, and light‐emitting transistors. Perovskite materials with photoluminescence quantum yields close to 100% and perovskite light‐emitting diodes with external quantum efficiencies of 8% and current efficiencies of 43 cd A−1 have been achieved. Although perovskite light‐emitting devices are yet to become industrially relevant, in merely two years these devices have achieved the brightness and efficiencies that organic light‐emitting diodes accomplished in two decades. Further advances will rely decisively on the multitude of compositional, structural variants that enable the formation of lower‐dimensionality layered and three‐dimensional perovskites, nanostructures, charge‐transport materials, and device processing with architectural innovations. Here, the rapid advancements in perovskite light‐emitting devices and lasers are reviewed. The key challenges in materials development, device fabrication, operational stability are addressed, and an outlook is presented that will address market viability of perovskite light‐emitting devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Shape control of CdSe nanocrystals
Peng, X., Manna, L., Yang, W., Wickham, J., Scher, E., Kadavanich, A., & Alivisatos, A. P. (2000) · Nature · doi:10.1038/35003535 · Cited by 4,487
Colloidal nanocrystal synthesis and the organic–inorganic interface
Yin, Y., & Alivisatos, A. P. (2005) · Nature · doi:10.1038/nature04165 · Cited by 3,273
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Akkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Room-Temperature Near-Infrared High-Q Perovskite Whispering-Gallery Planar Nanolasers
Zhang, Q., Ha, S. T., Liu, X., Sum, T. C., & Xiong, Q. (2014) · Nano Letters · doi:10.1021/nl503057g · Cited by 816
Self-citationLead iodide perovskite light-emitting field-effect transistor
Chin, X. Y., Cortecchia, D., Yin, J., Bruno, A., & Soci, C. (2015) · Nature Communications · doi:10.1038/ncomms8383 · Cited by 767
Correlated electron–hole plasma in organometal perovskites
Saba, M., Cadelano, M., Marongiu, D., Chen, F., Sarritzu, V., Sestu, N., Figus, C., Aresti, M., Piras, R., Geddo Lehmann, A., et al. (2014) · Nature Communications · doi:10.1038/ncomms6049 · Cited by 603
Perovskite Microdisk Microlasers Self‐Assembled from Solution
Liao, Q., Hu, K., Zhang, H., Wang, X., Yao, J., & Fu, H. (2015) · Advanced Materials · doi:10.1002/adma.201500449 · Cited by 406
Cited by
Ahmadi, M., Wu, T., & Hu, B. (2017) · Advanced Materials · doi:10.1002/adma.201605242 · Cited by 820
CsPbxMn1–xCl3 Perovskite Quantum Dots with High Mn Substitution Ratio
Liu, H., Wu, Z., Shao, J., Yao, D., Gao, H., Liu, Y., Yu, W., Zhang, H., & Yang, B. (2017) · ACS Nano · doi:10.1021/acsnano.6b08747 · Cited by 587
Machine learning for perovskite materials design and discovery
Tao, Q., Xu, P., Li, M., & Lu, W. (2021) · npj Computational Materials · doi:10.1038/s41524-021-00495-8 · Cited by 542
Self-citationSemiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction
Wu, H., Li, X., Tung, C., & Wu, L. (2019) · Advanced Materials · doi:10.1002/adma.201900709 · Cited by 486
CsPbBr3 QD/AlOx Inorganic Nanocomposites with Exceptional Stability in Water, Light, and Heat
Loiudice, A., Saris, S., Oveisi, E., Alexander, D. T. L., & Buonsanti, R. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703703 · Cited by 482
Metadata
- Authors
- Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2016-05-23
- Volume
- 28
- Issue
- 32
- Pages
- 6804-6834
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2396261957
- Cited by
- 1,465
- References
- 11
- FWCI
- 86.59
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Perovskite Materials for Light‐Emitting Diodes and Lasers. https://app.cochat.ai/papers/10.1002/adma.201600669
- The paper
- Veldhuis, S. A., Boix, P. P., Yantara, N., Li, M., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016). Perovskite Materials for Light‐Emitting Diodes and Lasers. Advanced Materials. https://doi.org/10.1002/adma.201600669
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
