The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Promoting SnTe as an Eco‐Friendly Solution for p‐PbTe Thermoelectric via Band Convergence and Interstitial Defects
Abstract
Compared to commercially available p‐type PbTe thermoelectrics, SnTe has a much bigger band offset between its two valence bands and a much higher lattice thermal conductivity, both of which limit its peak thermoelectric figure of merit, zT of only 0.4. Converging its valence bands or introducing resonant states is found to enhance the electronic properties, while nanostructuring or more recently introducing interstitial defects is found to reduce the lattice thermal conductivity. Even with an integration of some of the strategies above, existing efforts do not enable a peak zT exceeding 1.4 and usually involve Cd or Hg. In this work, a combination of band convergence and interstitial defects, each of which enables a ≈150% increase in the peak zT, successfully accumulates the zT enhancements to be ≈300% (zT up to 1.6) without involving any toxic elements. This opens new possibilities for further improvements and promotes SnTe as an environment‐friendly solution for conventional p‐PbTe thermoelectrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Convergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Self-citationEnhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Copper ion liquid-like thermoelectrics
Liu, H., Shi, X., Xu, F., Zhang, L., Zhang, W., Chen, L., Li, Q., Uher, C., Day, T., & Snyder, G. J. (2012) · Nature Materials · doi:10.1038/nmat3273 · Cited by 2,118
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationHigh Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Low-Symmetry Rhombohedral GeTe Thermoelectrics
Li, J., Zhang, X., Chen, Z., Lin, S., Li, W., Shen, J., Witting, I. T., Faghaninia, A., Chen, Y., Jain, A., et al. (2018) · Joule · doi:10.1016/j.joule.2018.02.016 · Cited by 583
Self-citationManipulation of Phonon Transport in Thermoelectrics
Chen, Z., Zhang, X., & Pei, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705617 · Cited by 542
Self-citationDefect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Self-citationEco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Self-citationZheng, Z., Su, X., Deng, R., Stoumpos, C., Xie, H., Liu, W., Yan, Y., Hao, S., Uher, C., Wolverton, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13611 · Cited by 415
Routes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Thermoelectric GeTe with Diverse Degrees of Freedom Having Secured Superhigh Performance
Hong, M., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807071 · Cited by 291
Self-citationChalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism
Yu, Y., Cagnoni, M., Cojocaru‐Mirédin, O., & Wuttig, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904862 · Cited by 272
Hu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802116 · Cited by 266
Su, H., Lei, S., Chen, Y., Lv, Y., & Zhang, Q. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c16158 · Cited by 4
Metadata
- Authors
- Li, W., Zheng, L., Ge, B., Lin, S., Zhang, X., Chen, Z., Chang, Y., & Pei, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-03
- Volume
- 29
- Issue
- 17
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2592106473
- Cited by
- 432
- References
- 31
- FWCI
- 22.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.