The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Promoting SnTe as an Eco‐Friendly Solution for p‐PbTe Thermoelectric via Band Convergence and Interstitial Defects
Abstract
Compared to commercially available p‐type PbTe thermoelectrics, SnTe has a much bigger band offset between its two valence bands and a much higher lattice thermal conductivity, both of which limit its peak thermoelectric figure of merit, zT of only 0.4. Converging its valence bands or introducing resonant states is found to enhance the electronic properties, while nanostructuring or more recently introducing interstitial defects is found to reduce the lattice thermal conductivity. Even with an integration of some of the strategies above, existing efforts do not enable a peak zT exceeding 1.4 and usually involve Cd or Hg. In this work, a combination of band convergence and interstitial defects, each of which enables a ≈150% increase in the peak zT, successfully accumulates the zT enhancements to be ≈300% (zT up to 1.6) without involving any toxic elements. This opens new possibilities for further improvements and promotes SnTe as an environment‐friendly solution for conventional p‐PbTe thermoelectrics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Convergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Self-citationEnhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Copper ion liquid-like thermoelectrics
Liu, H., Shi, X., Xu, F., Zhang, L., Zhang, W., Chen, L., Li, Q., Uher, C., Day, T., & Snyder, G. J. (2012) · Nature Materials · doi:10.1038/nmat3273 · Cited by 2,118
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe
Zhao, L.-D., Tan, G., Hao, S., He, J., Pei, Y., Chi, H., Wang, H., Gong, S., Xu, H., Dravid, V. P., et al. (2016) · Science · doi:10.1126/science.aad3749 · Cited by 2,037
Self-citationBand Engineering of Thermoelectric Materials
Pei, Y., Wang, H., & Snyder, G. J. (2012) · Advanced Materials · doi:10.1002/adma.201202919 · Cited by 1,793
Self-citationEnhanced Thermoelectric Figure-of-Merit in Nanostructured p-type Silicon Germanium Bulk Alloys
Joshi, G., Lee, H., Lan, Y., Wang, X., Zhu, G., Wang, D., Gould, R. W., Cuff, D. C., Tang, M. Y., Dresselhaus, M. S., et al. (2008) · Nano Letters · doi:10.1021/nl8026795 · Cited by 1,119
Semiconducting Lead Chalcogenides
Ravich, Y. I., Efimova, B. A., & Smirnov, I. A. (1970) · Springer eBooks · doi:10.1007/978-1-4684-8607-0 · Cited by 904
High thermoelectric performance by resonant dopant indium in nanostructured SnTe
Zhang, Q., Liao, B., Lan, Y., Lukas, K., Liu, W., Esfarjani, K., Opeil, C., Broido, D., Chen, G., & Ren, Z. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305735110 · Cited by 789
High thermoelectric figure of merit in heavy hole dominated PbTe
Pei, Y., LaLonde, A., Iwanaga, S., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00456a · Cited by 784
Self-citationBiCuSeO oxyselenides: new promising thermoelectric materials
Zhao, L.-D., He, J., Berardan, D., Lin, Y., Li, J.-F., Nan, C.-W., & Dragoe, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00997e · Cited by 722
Tan, G., Zhao, L.-D., Shi, F., Doak, J. W., Lo, S.-H., Sun, H., Wolverton, C., Dravid, V. P., Uher, C., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500860m · Cited by 706
Tan, G., Shi, F., Hao, S., Chi, H., Zhao, L.-D., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00837 · Cited by 502
Broad temperature plateau for high ZTs in heavily doped p-type SnSe single crystals
Peng, K., Lu, X., Zhan, H., Hui, S., Tang, X., Wang, G., Dai, J., Uher, C., Wang, G., & Zhou, X. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03366g · Cited by 451
Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe
Tan, G., Shi, F., Doak, J. W., Sun, H., Zhao, L.-D., Wang, P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01463d · Cited by 401
High Band Degeneracy Contributes to High Thermoelectric Performance in p‐Type Half‐Heusler Compounds
Fu, C., Zhu, T., Pei, Y., Xie, H., Wang, H., Snyder, G. J., Liu, Y., Liu, Y., & Zhao, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400600 · Cited by 341
Self-citationWu, H., Chang, C., Feng, D., Xiao, Y., Zhang, X., Pei, Y., Zheng, L., Wu, D., Gong, S., Chen, Y., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02423d · Cited by 325
Self-citationInterstitial Point Defect Scattering Contributing to High Thermoelectric Performance in SnTe
Pei, Y., Zheng, L., Li, W., Lin, S., Chen, Z., Wang, Y., Xu, X., Yu, H., Chen, Y., & Ge, B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600019 · Cited by 306
Self-citationBanik, A., Vishal, B., Perumal, S., Datta, R., & Biswas, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00728g · Cited by 296
Qiu, W., Xi, L., Wei, P., Ke, X., Yang, J., & Zhang, W. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1410349111 · Cited by 292
High Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
Pei, Y., LaLonde, A. D., Heinz, N. A., & Snyder, G. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100770 · Cited by 289
Self-citationLow Sound Velocity Contributing to the High Thermoelectric Performance of Ag8SnSe6
Li, W., Lin, S., Ge, B., Yang, J., Zhang, W., & Pei, Y. (2016) · Advanced Science · doi:10.1002/advs.201600196 · Cited by 284
Self-citationOptimization of thermoelectric efficiency in SnTe: the case for the light band
Zhou, M., Gibbs, Z. M., Wang, H., Han, Y., Xin, C., Li, L., & Snyder, G. J. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02091j · Cited by 270
Band and scattering tuning for high performance thermoelectric Sn1−xMnxTe alloys
Li, W., Chen, Z., Lin, S., Chang, Y., Ge, B., Chen, Y., & Pei, Y. (2015) · Journal of Materiomics · doi:10.1016/j.jmat.2015.09.001 · Cited by 223
Self-citationRELATIVISTIC BAND STRUCTURE OF GeTe, SnTe, PbTe, PbSe, AND PbS
Herman, F., Kortum, R. L., Ortenburger, I. B., & Dyke, J. P. V. (1968) · Le Journal de Physique Colloques · doi:10.1051/jphyscol:1968410 · Cited by 119
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationHigh Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Low-Symmetry Rhombohedral GeTe Thermoelectrics
Li, J., Zhang, X., Chen, Z., Lin, S., Li, W., Shen, J., Witting, I. T., Faghaninia, A., Chen, Y., Jain, A., et al. (2018) · Joule · doi:10.1016/j.joule.2018.02.016 · Cited by 583
Self-citationManipulation of Phonon Transport in Thermoelectrics
Chen, Z., Zhang, X., & Pei, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705617 · Cited by 542
Self-citation
Metadata
- Authors
- Li, W., Zheng, L., Ge, B., Lin, S., Zhang, X., Chen, Z., Chang, Y., & Pei, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-03
- Volume
- 29
- Issue
- 17
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2592106473
- Cited by
- 432
- References
- 31
- FWCI
- 22.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.