Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
The DOI matches its Crossref record; 49 of the 51 references it cites were found in a registry or an index.
Abstract
Highly reproducible organometallic-halide-perovskite-based devices are fabricated by a manufacturing process, which is demonstrated. Various shapes that are hard to synthesize directly are fabricated, and many unique properties are achieved.The fabrication procedure is utilized to create a photodetector and the detection sensitivity is significantly improved. The results will bring revolutionary advancement to the future of lead-halide-perovskite-based optoelectronic devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In addition, the throughput of our method is many times higher than already reported patterning by e-beam [10] or focused ion beam (FIB) [30].”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [10]
In the citing paper
“Recently top-down patterning of MAPbBr3 perovskite by ebeam lithography with poly(methyl methacrylate) (PMMA) resist has been demonstrated [10]. Although remarkable results have been achieved, this method is limited by low throughput of e-beam systems and risk of cross-contaminating other samples processed in the same tools with elements contained within perovskites (such as Pb, Br and I).”
From Integrated perovskite lasers on a silicon nitride waveguide platform by cost-effective high throughput fabrication (2017) · cites this paper as [10]
In the citing paper
“At very high excitation this ASE noise is so strong that it leads to overlapping of the WGMs”
From Monolithically Integrated Perovskite Semiconductor Lasers on Silicon Photonic Chips by Scalable Top-Down Fabrication (2018) · cites this paper as [18]
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432 · cited 1×
“Lead halide perovskites have been intensively studied in the past few years due to their high absorption coefficients, making them strong components for high performance; low cost solar cells [1-3].”
BackgroundLow trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Vahala, K. J. (2003) · Nature · doi:10.1038/nature01939 · Cited by 4,878
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging
Khorasaninejad, M., Chen, W. T., Devlin, R. C., Oh, J., Zhu, A. Y., & Capasso, F. (2016) · Science · doi:10.1126/science.aaf6644 · Cited by 3,411
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells
Snaith, H. J. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4020162 · Cited by 3,042 · cited 1×
“Lead halide perovskites have been intensively studied in the past few years due to their high absorption coefficients, making them strong components for high performance; low cost solar cells [1-3].”
BackgroundLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Solution-processed hybrid perovskite photodetectors with high detectivity
Dou, L., Yang, Y., You, J., Hong, Z., Chang, W.-H., Li, G., & Yang, Y. (2014) · Nature Communications · doi:10.1038/ncomms6404 · Cited by 2,765
Research works printed but not linked: 3
- Wang K. Y., 2016, Mater. Chem. Front.
- 10.1021/acsphotonics.6b00209 · DOI
- 10.1038/ncomms6404 · DOI · Paper page
Cited by
Items 101–176 of 176
On‐Chip‐Integrated Methylammonium Halide Perovskite Optical Sensors
Sun, W., Huang, C., Fan, R., Liu, S., Wang, Y., Xiao, Y., Gan, Q., Xiao, S., & Song, Q. (2019) · Advanced Optical Materials · doi:10.1002/adom.201801308 · Cited by 19
Self-citationIce-assisted electron-beam lithography for halide perovskite optoelectronic nanodevices
Jin, B., Hong, Y., Li, Z., Zhao, D., Lu, Y., Yao, G., Zheng, R., Bi, G., Zhang, Q., Fang, X., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107692 · Cited by 18
Directional Laser from Solution‐Grown Grating‐Patterned Perovskite Single‐Crystal Microdisks
Zhang, Z., Vogelbacher, F., De, J., Wang, Y., Liao, Q., Tian, Y., Song, Y., & Li, M. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202205636 · Cited by 17
Recent advances in halide perovskite memristors: From materials to applications
Liu, S., Zeng, J., Chen, Q., & Liu, G. (2023) · Frontiers of Physics · doi:10.1007/s11467-023-1344-9 · Cited by 18
Squeezing the Threshold of Metal‐Halide Perovskite Micro‐Crystal Lasers Grown by Solution Epitaxy
Zhou, S., Rehm, V., Afify, H. A., Han, Y., Korczak, J., Szczerbakow, A., Story, T., Peng, Z., These, A., Barabash, A., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202404700 · Cited by 15
Mao, W., Zheng, J., Zhang, Y., Chesman, A. S. R., Ou, Q., Hicks, J., Li, F., Wang, Z., Graystone, B. A., Bell, T. D. M., et al. (2017) · Angewandte Chemie · doi:10.1002/ange.201703786 · Cited by 15
Record Second‐Harmonic Generation in a Lead‐Free 2D Hybrid Halide Perovskite
Fan, C., Liu, C., Wu, J., Wang, W. Q., Zhao, Y., Hu, C., Li, B., & Liang, B. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202401607 · Cited by 13
Ge, F., Li, B., Cheng, P., Li, G., Ren, Z., Xu, J., & Bu, X. (2022) · Angewandte Chemie · doi:10.1002/ange.202115024 · Cited by 13
Transparent and Reusable Nanostencil Lithography for Organic–Inorganic Hybrid Perovskite Nanodevices
Han, B., Liu, B., Wang, G., Qiu, Q., Wang, Z., Xi, Y., Cui, Y., Ma, S., Xu, B., & Hsu, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300570 · Cited by 13
Cryogenic Electron-Beam Writing for Perovskite Metasurface
Jin, B., Lu, Y., Sun, J., Sun, X., Wen, L., Zhang, Q., Zhao, D., & Qiu, M. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c00954 · Cited by 13
Solution‐Processed Perovskite Microdisk for Coherent Light Emission
Li, X., Zhang, X., Li, H., Liu, T., Zhao, D., Liang, C., Xing, G., & Tang, Z. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900678 · Cited by 13
Zhang, H., Yao, J., & Fu, H. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c03098 · Cited by 13
Low-cost fabrication of microlasers based on polymeric micropedestals
la Cruz, H. M. R.-D., Ortiz-Ricardo, E., Camarena-Chávez, V. A., Martínez-Bórquez, A., Gutiérrez-Juárez, G., U’Ren, A. B., & Castro‐Beltrán, R. (2020) · Applied Optics · doi:10.1364/ao.410615 · Cited by 14
Silicon‐Integrated Perovskite Photonic Laser Based on Bound States in Continuum
Gu, Z., Gu, H., Zhang, N., Jiang, S., Wang, G., Mao, Y., Liao, J., Yang, S., Liang, C., & Xing, G. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202401327 · Cited by 13
Self-citationKamal, A. S. A., Lin, C., Xing, D., Lee, Y., Wang, Z., Chen, M., Ho, Y., Chen, C., & Delaunay, J. (2021) · Nanoscale · doi:10.1039/d1nr04543a · Cited by 13
Jin, L., Wang, X.-Z., Zeng, L., Feng, Z., Zhao, N., & Sun, X. (2024) · ACS Photonics · doi:10.1021/acsphotonics.4c00880 · Cited by 13
Basumatary, P., & Ghosh, D. S. (2025) · Journal of Applied Physics · doi:10.1063/5.0252837 · Cited by 13
Emerging Intelligent Manufacturing of Metal Halide Perovskites
Zhang, Y., Chen, T., Yi, S., Zhang, X., Jiao, Y., Lü, J., & Zhao, J. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200275 · Cited by 12
Emission Control in Metal Halide Perovskite Lasers
Wang, K., Huang, C., Ruan, Q., Zhou, Y., Chen, Y., Liu, H., Xiao, S., & Song, Q. (2023) · ACS Photonics · doi:10.1021/acsphotonics.2c01658 · Cited by 9
Self-citationMa, P., Yan, L., Si, J., Huo, T., Huang, Z., Tan, W., Xu, J., & Hou, X. (2023) · Laser & Photonics Review · doi:10.1002/lpor.202300533 · Cited by 9
Concrete perovskites for fabricating high-quality micro-laser arrays
Zhang, H., Chen, T., & Fu, H. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03988h · Cited by 9
Meyers, J. K., Serafin, L. Y., Orr, A. D., McKinney, C., & Cahoon, J. F. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00495 · Cited by 9
Electrically Switchable Amplified Spontaneous Emission from Lead Halide Perovskite Film
Liu, P., Gu, C., & Liao, Q. (2021) · ACS Omega · doi:10.1021/acsomega.1c05364 · Cited by 9
Hybrid Germanium Bromide Perovskites with Tunable Second Harmonic Generation
Liu, Y., Gong, Y.-P., Geng, S., Feng, M., Manidaki, D., Deng, Z., Stoumpos, C. C., Canepa, P., Xiao, Z., Zhang, W., et al. (2022) · Angewandte Chemie · doi:10.1002/ange.202208875 · Cited by 8
Mokdad, S., Boukazoula, A., Chouchane, K., Saib, F., Trari, M., & Abdi, A. (2023) · Chemical Papers · doi:10.1007/s11696-023-02837-w · Cited by 8
Park, T. W., Jung, H., Park, J., Ahn, Y.-S., Hong, S. W., Lee, J., Lee, J., & Park, W. I. (2021) · Nanoscale · doi:10.1039/d1nr02358f · Cited by 8
Fully Inkjet‐Printed Perovskite Microlaser with an Outcoupling Waveguide
Smirnov, A., Polushkin, A. S., Falchevskaya, A. S., Mikhailova, M., Shamkhi, H. K., Zelenkov, L. E., Pogosian, T., Morozov, M. I., Makarov, S., & Vinogradov, A. V. (2023) · Advanced Optical Materials · doi:10.1002/adom.202300385 · Cited by 7
Gold nanorods as performance enhancers in planar perovskite solar cells: A numerical study
Carvalho, D. F., Teixeira, J. P., Salomé, P. M. P., Fernandes, P. A., & Correia, M. R. (2024) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2024.113112 · Cited by 7
Park, T. W., Kang, Y. L., Kim, Y. N., & Park, W. I. (2023) · Nanomaterials · doi:10.3390/nano13162335 · Cited by 7
Fan, J., Du, W., Mi, Y., & Liu, X. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814162-5.00003-0 · Cited by 7
Song, J., Li, C., Shang, Q., Ke, Y., Zhao, L., Liang, Y., Zhang, L., & Zhang, Q. (2021) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/ac0463 · Cited by 7
“The group refractive index n g , extracted from the size-dependence of free spectral range for the WGM lasing, is 4.3–5.4, which is consistent with previous reported values [27, 29, 30, 59].”
InfluentialActive polymer-based halide perovskites for light-driven applications: A review
Thien, G. S. H., Chan, K., Marlinda, A. R., Sarjidan, M. A. M., Majid, W. H. A., & Yap, B. K. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100538 · Cited by 6
A Versatile Top-Down Patterning Technique for Perovskite On-Chip Integration
Fabrizi, F., Goudarzi, S., Khan, S., Mohammad, T., Starodubtceva, L., Cegielski, P. J., Thiel, F., Özen, S., Schiffer, M., Lang, F., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c10397 · Cited by 10
“56 The PMMA prevents direct contact between the perovskite and photoresists, 57 whereas AZ MIR 701 facilitates a standard lithography process.”
Hu, Z., Fu, Q., Lü, J., Zhang, Y., Zhang, Q., Wang, S., Duan, Z., Zhang, Y., Liu, X., Pan, Q., et al. (2024) · Science Advances · doi:10.1126/sciadv.adp8045 · Cited by 5
“It has been widely recognized that conventional lithography and thermal deposition processes cause severe damage to perovskites due to their sensitivity to polar solvents (deionized water and acetone), electron beams, and high temperature ( 20 ).”
Self-citationPiecco, K. W. E. S., Vicente, J. R., Pyle, J. R., Ingram, D. C., Kordesch, M. E., & Chen, J. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00475 · Cited by 5
Next-generation self-powered nanosensors
Butt, Z., Aziz, M. S., Aamir, M., Syed, A. S., & Akhtar, J. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823358-0.00023-x · Cited by 9
Nanoprinting with Crystal Engineering for Perovskite Lasers
Hu, S., Wang, T., Zhou, Z., Liu, Y., Yang, J., Zou, T., Li, X., Jiang, T., Lee, H., Xiao, H., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c16906 · Cited by 4
Unidirectional emission from a PT -symmetric annular microcavity
Zhu, D., Liu, S., Fan, R., Xiao, S., & Song, Q. (2019) · Physical Review A · doi:10.1103/physreva.99.033849 · Cited by 4
Self-citationLow‐threshold and narrow‐linewidth perovskite microlasers pumped by a localized waveguide source
Liu, H., Yu, H., Dai, L., Li, Z., & Chen, J. (2021) · Nanophotonics · doi:10.1515/nanoph-2021-0280 · Cited by 4
All‐Optical Modulation of Microcavity Emission by Parity‐Time Symmetry
Gu, Z., Zhang, Q., Song, Q., & Xiao, S. (2020) · Annalen der Physik · doi:10.1002/andp.202000133 · Cited by 4
Self-citationShi, B., Han, Y., Zhang, M., Fan, Z., Goodilin, E. A., Veselova, I. A., Wen, W., & Wu, J. (2026) · ACS Nano · doi:10.1021/acsnano.5c21710 · Cited by 4
Yao, Y., Lv, Y., & Zhao, Y. S. (2026) · Advanced Optical Materials · doi:10.1002/adom.71319 · Cited by 2
Quantum dot micro/nano patterns: advanced manufacturing for controlled assembly
Li, J., Guo, Y., Huang, W., Su, H., Zhou, X., Zhang, Y., Guo, T., Kim, T. W., & Wu, C. (2026) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae5296 · Cited by 4
Directional Laser from Solution‐Grown Grating‐Patterned Perovskite Single‐Crystal Microdisks
Zhang, Z., Vogelbacher, F., De, J., Wang, Y., Liao, Q., Tian, Y., Song, Y., & Li, M. (2022) · Angewandte Chemie · doi:10.1002/ange.202205636 · Cited by 2
Three-dimensional perovskite-based photonic structures made by two-step crystallization
Sinelnik, A. D., Bodiago, E., Kushchenko, O. M., Shishkin, I. I., Kuzmenko, N. K., Gets, D. S., & Makarov, S. (2023) · Optics & Laser Technology · doi:10.1016/j.optlastec.2023.110411 · Cited by 2
Scaffold-directed growth of metal halide perovskite hopper crystals
Zhou, Q., Kim, M., Zhang, Y., Alaei, A., Shtukenberg, A. G., Kalyon, D. M., & Lee, S. S. (2024) · CrystEngComm · doi:10.1039/d3ce01153d · Cited by 2
Side-mode suppression in ultraviolet quasi-semicircle microlaser cavity
Zhang, C., Zhu, G., He, S., & Dai, J. (2020) · Modern Physics Letters B · doi:10.1142/s0217984920503303 · Cited by 2
Xiangtong, 孔. K., Ruiheng, 金. J., Yue, 崔. C., Xu, K., Kaiyang, 王. W., & Can, 黄. H. (2025) · Laser & Optoelectronics Progress · doi:10.3788/lop251133 · Cited by 1
Zehui, 周. Z., Xinyu, 段. D., Cong, 邹. Z., Zhongyu, 陈. C., Beibei, 许. X., & Jianrong, 邱. Q. (2026) · Chinese Journal of Lasers · doi:10.3788/cjl251207 · Cited by 1
Tsarev, S. A., Wu, E., Cho, K., Liu, X., Lung, Q. N. D., Hartman, E., Sun, T. S., Türedi, B., Matt, G. J., Frick, S., et al. (2026) · Advanced Materials · doi:10.1002/adma.202523002 · Cited by 1
“For instance, PMMA photoresists have been used for e-beam lithography on perovskites due to their processing with exclusively non-polar solvents [15, 20, 21].”
Shaping perovskite materials into micro/nanostructures for photonics and optoelectronic applications
Mastria, R., Polimeno, L., Todisco, F., Difeo, F. S., Viola, I., Sanvitto, D., Marco, L. D., & Rizzo, A. (2026) · Chemical Society Reviews · doi:10.1039/d6cs00257a · Cited by 1
Cegielski, P. J., Neutzner, S., Porschatis, C., Gandini, M., Schall, D., Perini, C. A. R., Bolten, J., Suckow, S., Chmielak, B., Petrozza, A., et al. (2018) · Conference digest · doi:10.1109/drc.2018.8442221 · Cited by 1
Nonlinear Optical Microcavities Towards Single-Molecule Sensing
Liu, W., Tang, S., & Xiao, Y. (2022) · Nanostructure science and technology · doi:10.1007/978-3-030-90339-8_3 · Cited by 3
Gu, H., Gao, G., Li, S. X., Wang, J., Jiang, X., Wang, K., & Hu, X. (2024) · Engineering materials · doi:10.1007/978-3-031-57663-8_15 · Cited by 1
Self-citationUltracompact and Uniform Nanoemitter Array Based on Periodic Scattering
Yin, Z., Tang, H., Wang, K., Zhang, X., Sha, X., Wang, W., Xiao, S., & Song, Q. (2024) · Nano Letters · doi:10.1021/acs.nanolett.4c03690 · Cited by 1
Self-citationLotus-like nano-architectures constructed from self-assembled micelles via hierarchical assembly
Zhang, R., Fan, X., Xu, X., Lv, J., Jin, Z., Hao, H. M., & Zhang, C. (2017) · Macromolecular Research · doi:10.1007/s13233-018-6012-5 · Cited by 1
Research advances of ultrahigh-Q on-chip microcavity photonics
Cao, Q.-T., Tang, S., Chen, H.-J., & Xiao, Y. (2020) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/tb-2020-0333 · Cited by 1
Perovskite Micro Laser arrays using Scalable Lithography: Towards Integrated Perovskite Photonics
Bar‐On, O., Brenner, P., Lemmer, U., & Scheuer, J. (2019) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_si.2019.sf2j.2 · Cited by 1
Eze, M. C., Eze, V. H. U., Ugwuanyi, G., Alnajideen, M., Atia, A., Olisa, S. C., Rocha, V. G., & Min, G. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4060807 · Cited by 1
Methylammonium Lead Trihalide Perovskite Solar Cell Semiconductors Are Not OrganometallicPreprint
Varadwaj, P. R. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1703.09885
Integrated Perovskite Devices: Scalable Lithography of Methylammonium Lead Iodide
Bar‐On, O., Brenner, P., Lemmer, U., & Scheuer, J. (2018) · OSA Advanced Photonics Congress · doi:10.1364/noma.2018.nom4d.1
Enhancing the Three-Photon Luminesce via the Resonance in Lead Halide Perovskite MetasurfacesPreprint
Fan, Y., Wang, Y., Zhang, N., Sun, W., Gao, Y., Qiu, C., Song, Q., & Xiao, S. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1904.01265
Self-citationPerovskite Micro Laser Arrays Using Scalable Lithography: Towards Integrated Perovskite Photonics
Bar‐On, O., Brenner, P., Lemmer, U., & Scheuer, J. (2019) · Conference on Lasers and Electro-Optics · doi:10.23919/cleo.2019.8750141
Microring lasers based on Si3N4 optical waveguides cladded with perovskite quantum-dot film
Liu, E., Meng, L., Xiang, Y., Daoxin Dai, A., & Zhong, H. (2019) · Optoelectronic devices and integration. Conference · doi:10.1117/12.2538743
“Complex protection steps are needed due to the instability of perovskite in air ([13]).”
BackgroundPatterning Perovskite Thin Film via CYTOP Assisted Photolithography Process
Yan, L., Zou, T., Liu, X., & Zhou, H. (2019) · IEEE International Conference on Nanotechnology (IEEE-NANO) · doi:10.1109/nano46743.2019.8993683
“have reported the patterning of perovskite by E-beam lithography [12].”
BackgroundControlling the integrated micro-lasers with ultrahigh speed and ultralow energy consumption
Song, Q., & Xiao, S. (2020) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_si.2020.sf1o.3
Self-citationOptical modes in the perovskite CsPbX3 semicircular and circular microcavity
Xu, J., & Dai, J. (2022) · International Journal of Modern Physics B · doi:10.1142/s0217979222400227
Piecco, K. W. E. S., Vicente, J. R., Pyle, J. R., Ingram, D. C., Kordesch, M. E., & Chen, J. (2019) · ChemRxiv · doi:10.26434/chemrxiv.8966297
Metal Halide Perovskites for Coherent Light Emission
Wang, K., Gao, X., Qin, C., & Xing, G. (2022) · Wiley eBooks · doi:10.1002/9783527832552.ch16
Self-citationPatterned perovskites for designing metasurfaces and laser arrays
Cherepakhin, A. B., Zhizhchenko, A. Y., Pushkarev, A. P., Kuchmizhak, A. A., & Makarov, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00012-x
Lead halide perovskite-based whispering gallery mode (WGM) lasers
Liu, Z., Du, J., Leng, Y., & Li, R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-91661-5.00014-3
Microfabricated Coherent Light Sources
Wang, Z., Xing, D., Chen, M., Lin, B., Lee, Y.-T., & Delaunay, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95478-5.00037-6
A Versatile Top-Down Patterning Technique for Perovskite On-Chip Integration
Fabrizi, F., Goudarzi, S., Khan, S., Mohammad, T., Starodubtceva, L., Cegielski, P. J., Thiel, F., Özen, S., Schiffer, M., Lang, F., et al. (2025) · ACS Nano · doi:10.18154/rwth-2025-08063
Lasers à pérovskites hybrides halogénées en microcavité
Bouteyre, P. (2019) · theses.fr (ABES) · doi:10.70675/42bf2a2aze3d3z4050zb89cz3212f870f879 · Cited by 3
Berry, F. (2020) · theses.fr (ABES) · doi:10.70675/d76e9870z8597z450az91adzdb620f3b6435 · Cited by 5
Engineering exciton-polaritons at room temperature with halide perovskite based metasurface
Dang, N. H. M. (2022) · theses.fr (ABES) · doi:10.70675/582d31cfz826az478cza2e5z11cb8fed9771
Metadata
- Authors
- Zhang, N., Sun, W., Rodrigues, S. P., Wang, K., Gu, Z., Wang, S., Cai, W., Xiao, S., & Song, Q.
- Affiliations
- Harbin Institute of Technology (CN)
- Georgia Institute of Technology (US)
- Corresponding author
- Cai, Wenshan
- Xiao, Shumin
- Song, Qinghai
- ORCID
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-02-13
- Volume
- 29
- Issue
- 15
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2588223802
- Semantic Scholar
- 109878aa9c31adc7e0511e3405ce1f61396d7832
- Cited by
- 176
- References
- 51
- Citations by year
- 2026: 6 · 2025: 8 · 2024: 13 · 2023: 16 · 2022: 23 · 2021: 23 · 2020: 25 · 2019: 33 · 2018: 20 · 2017: 9
- FWCI
- 9.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (11374078)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Nanofabrication and Lithography Techniques
- Keywords
- organometallic halide perovskites, lead halide perovskites, top-down lithography, photodetectors, detection sensitivity, optoelectronic devices
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.