The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability
Open accessAbstract
A fullerene derivative (α‐bis‐PCBM) is purified from an as‐produced bis‐phenyl‐C 61‐butyric acid methyl ester (bis‐[60]PCBM) isomer mixture by preparative peak‐recycling, high‐performance liquid chromatography, and is employed as a templating agent for solution processing of metal halide perovskite films via an antisolvent method. The resulting α‐bis‐PCBM‐containing perovskite solar cells achieve better stability, efficiency, and reproducibility when compared with analogous cells containing PCBM. α‐bis‐PCBM fills the vacancies and grain boundaries of the perovskite film, enhancing the crystallization of perovskites and addressing the issue of slow electron extraction. In addition, α‐bis‐PCBM resists the ingression of moisture and passivates voids or pinholes generated in the hole‐transporting layer. As a result, a power conversion efficiency (PCE) of 20.8% is obtained, compared with 19.9% by PCBM, and is accompanied by excellent stability under heat and simulated sunlight. The PCE of unsealed devices dropped by less than 10% in ambient air (40% RH) after 44 d at 65 °C, and by 4% after 600 h under continuous full‐sun illumination and maximum power point tracking, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Self-citationShao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Self-citationYuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Self-citationOrganometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Perovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Bulk heterojunction perovskite–PCBM solar cells with high fill factor
Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624
Tidhar, Y., Edri, E., Weissman, H., Zohar, D., Hodes, G., Cahen, D., Rybtchinski, B., & Kirmayer, S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505556s · Cited by 444
Recent Advances in Improving the Stability of Perovskite Solar Cells
Tiep, N. H., Ku, Z., & Fan, H. J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501420 · Cited by 356
Achieving long-term stable perovskite solar cells via ion neutralization
Back, H., Kim, G., Kim, J., Kong, J., Kim, T. K., Kang, H., Kim, H., Lee, J., Lee, S., & Lee, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00612d · Cited by 337
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505255 · Cited by 285
Self-citationCopper Salts Doped Spiro‐OMeTAD for High‐Performance Perovskite Solar Cells
Li, M., Wang, Z., Yang, Y., Hu, Y., Feng, S., Wang, J., Gao, X., & Liao, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601156 · Cited by 247
High Efficiency Pb–In Binary Metal Perovskite Solar Cells
Wang, Z., Li, M., Yang, Y., Hu, Y., Ma, H., Gao, X., & Liao, L. (2016) · Advanced Materials · doi:10.1002/adma.201600626 · Cited by 233
McGehee, M. D. (2014) · Nature Materials · doi:10.1038/nmat4050 · Cited by 207
Chang, J., Lin, Z., Zhu, H., Isikgor, F. H., Xu, Q.-H., Zhang, C., Hao, Y., & Ouyang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06851k · Cited by 159
Zhang, T., Guo, N., Li, G., Qian, X., & Zhao, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.05.003 · Cited by 158
Design Concept for High-LUMO-level Fullerene Electron-acceptors for Organic Solar Cells
Matsuo, Y. (2012) · Chemistry Letters · doi:10.1246/cl.2012.754 · Cited by 125
Film Grain‐Size Related Long‐Term Stability of Inverted Perovskite Solar Cells
Chiang, C., & Wu, C. (2016) · ChemSusChem · doi:10.1002/cssc.201600887 · Cited by 118
Recent Progress of Perovskite Solar Cells
Zhang, F., Wang, S., Li, X., et al. (2015) · Current Nanoscience · doi:10.2174/1573413711666150523002002 · Cited by 47
Self-citationChang, C., Huang, W.-K., & Chang, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02583 · Cited by 45
Cited by
Additive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Self-citationCauses and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Self-citationReducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Metadata
- Authors
- Zhang, F., Shi, W., Luo, J., Pellet, N., Yi, C., Li, X., Zhao, X., Dennis, T. J. S., Li, X., Wang, S., Xiao, Y., Zakeeruddin, S. M., Bi, D., & Grätzel, M.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-02-27
- Volume
- 29
- Issue
- 17
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2594454110
- Cited by
- 390
- References
- 28
- FWCI
- 26.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.