The DOI matches its Crossref record.
3D Printing All‐Aromatic Polyimides using Mask‐Projection Stereolithography: Processing the Nonprocessable
Open accessAbstract
High‐performance, all‐aromatic, insoluble, engineering thermoplastic polyimides, such as pyromellitic dianhydride and 4,4′‐oxydianiline (PMDA–ODA) (Kapton), exhibit exceptional thermal stability (up to ≈600 °C) and mechanical properties (Young's modulus exceeding 2 GPa). However, their thermal resistance, which is a consequence of the all‐aromatic molecular structure, prohibits processing using conventional techniques. Previous reports describe an energy‐intensive sintering technique as an alternative technique for processing polyimides with limited resolution and part fidelity. This study demonstrates the unprecedented 3D printing of PMDA–ODA using mask‐projection stereolithography, and the preparation of high‐resolution 3D structures without sacrificing bulk material properties. Synthesis of a soluble precursor polymer containing photo‐crosslinkable acrylate groups enables light‐induced, chemical crosslinking for spatial control in the gel state. Postprinting thermal treatment transforms the crosslinked precursor polymer to PMDA–ODA. The dimensional shrinkage is isotropic, and postprocessing preserves geometric integrity. Furthermore, large‐area mask‐projection scanning stereolithography demonstrates the scalability of 3D structures. These unique high‐performance 3D structures offer potential in fields ranging from water filtration and gas separation to automotive and aerospace technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advances in Polyimide‐Based Materials for Space Applications
Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N. (2019) · Advanced Materials · doi:10.1002/adma.201807738 · Cited by 732
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Self-citationA review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Self-citationAdditive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Metadata
- Authors
- Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B., & Long, T. E.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-19
- Volume
- 29
- Issue
- 31
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2625430999
- Cited by
- 196
- References
- 0
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing All‐Aromatic Polyimides using Mask‐Projection Stereolithography: Processing the Nonprocessable. https://app.cochat.ai/papers/10.1002/adma.201701240
- The paper
- Hegde, M., Meenakshisundaram, V., Chartrain, N., Sekhar, S., Tafti, D., Williams, C. B., & Long, T. E. (2017). 3D Printing All‐Aromatic Polyimides using Mask‐Projection Stereolithography: Processing the Nonprocessable. Advanced Materials. https://doi.org/10.1002/adma.201701240
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.