The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Advances in Polyimide‐Based Materials for Space Applications
Abstract
The space environment raises many challenges for new materials development and ground characterization. These environmental hazards in space include solar radiation, energetic particles, vacuum, micrometeoroids and debris, and space plasma. In low Earth orbits, there is also a significant concentration of highly reactive atomic oxygen (AO). This Progress Report focuses on the development of space‐durable polyimide (PI)‐based materials and nanocomposites and their testing under simulated space environment. Commercial PIs suffer from AO‐induced erosion and surface electric charging. Modified PIs and PI‐based nanocomposites are developed and tested to resist degradation in space. The durability of PIs in AO is successfully increased by addition of polyhedral oligomeric silsesquioxane. Conductive materials are prepared based on composites of PI and either carbon nanotube (CNT) sheets or 3D‐graphene structures. 3D PI structures, which can expand PI space applications, made by either additive manufacturing (AM) or thermoforming, are presented. The selection of AM‐processable engineering polymers in general, and PIs in particular, is relatively limited. Here, innovative preliminary results of a PI‐based material processed by the PolyJet technology are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Ma, P.-C., Siddiqui, N. A., Marom, G., & Kim, J.-K. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.003 · Cited by 3,414
An ultra-lightweight design for imperceptible plastic electronics
Kaltenbrunner, M., Sekitani, T., Reeder, J., Yokota, T., Kuribara, K., Tokuhara, T., Drack, M., Schwödiauer, R., Graz, I., Bauer-Gogonea, S., et al. (2013) · Nature · doi:10.1038/nature12314 · Cited by 2,485
Hecht, D. S., Hu, L., & Irvin, G. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,229
Advanced polyimide materials: Syntheses, physical properties and applications
Liaw, D.-J., Wang, K.-L., Huang, Y.-C., Lee, K.-R., Lai, J.-Y., & Ha, C.-S. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.005 · Cited by 2,187
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.03.050 · Cited by 1,169
Preparation of Novel 3D Graphene Networks for Supercapacitor Applications
Cao, X., Shi, Y., Shi, W., Lu, G., Huang, X., Yan, Q., Zhang, Q., & Zhang, H. (2011) · Small · doi:10.1002/smll.201100990 · Cited by 1,060
Qin, Y., Peng, Q., Ding, Y., Lin, Z., Wang, C., Li, Y., Xu, F., Li, J., Yuan, Y., He, X., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02781 · Cited by 775
Dispersion of single wall carbon nanotubes by in situ polymerization under sonication
Park, C., Ounaies, Z., Watson, K. A., Crooks, R. E., Smith, J., Lowther, S. E., Connell, J. W., Siochi, E. J., Harrison, J. S., & Clair, T. L. S. (2002) · Chemical Physics Letters · doi:10.1016/s0009-2614(02)01326-x · Cited by 752
Cited by
Recent Progress in Graphene/Polymer Nanocomposites
Sun, X., Huang, C., Wang, L., Liang, L., Cheng, Y., Fei, W., & Li, Y. (2021) · Advanced Materials · doi:10.1002/adma.202001105 · Cited by 490
Chen, X., Liu, H., Zheng, Y., Zhai, Y., Liu, X., Liu, C., Mi, L., Guo, Z., & Shen, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14688 · Cited by 357
Metadata
- Authors
- Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-25
- Volume
- 31
- Issue
- 18
- Pages
- e1807738-e1807738
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2915146071
- Cited by
- 732
- References
- 55
- FWCI
- 25.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Advances in Polyimide‐Based Materials for Space Applications. https://app.cochat.ai/papers/10.1002/adma.201807738
- The paper
- Gouzman, I., Grossman, E., Verker, R., Atar, N., Bolker, A., & Eliaz, N. (2019). Advances in Polyimide‐Based Materials for Space Applications. Advanced Materials. https://doi.org/10.1002/adma.201807738
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
