The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Abstract
The growing demand for rechargeable lithium‐ion batteries (LIBs) with higher capacity in customized geometries underscores the need for new battery materials, architectures, and assembly strategies. Here, the design, fabrication, and electrochemical performance of fully 3D printed LIBs composed of thick semisolid electrodes that exhibit high areal capacity are reported. Specifically, semisolid cathode and anode inks, as well as UV curable packaging and separator inks for direct writing of LIBs in arbitrary geometries are created. These fully 3D printed and packaged LIBs, which are encased between two glassy carbon current collectors, deliver an areal capacity of 4.45 mAh cm−2 at a current density of 0.14 mA cm−2, which is equivalent to 17.3 Ah L−1. The ability to produce high‐performance LIBs in customized form factors opens new avenues for integrating batteries directly within 3D printed objects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
True Performance Metrics in Electrochemical Energy Storage
Gogotsi, Y., & Simon, P. (2011) · Science · doi:10.1126/science.1213003 · Cited by 2,440
Rapidly falling costs of battery packs for electric vehicles
Nykvist, B., & Nilsson, M. (2015) · Nature Climate Change · doi:10.1038/nclimate2564 · Cited by 1,819
Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)
Zhang, L., Jiang, Y., Ding, Y., Povey, M., & York, D. (2007) · Journal of Nanoparticle Research · doi:10.1007/s11051-006-9150-1 · Cited by 1,490
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Self-citationThree-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Palacín, M. R., & de Guibert, A. (2016) · Science · doi:10.1126/science.1253292 · Cited by 871
Intermolecular and Surface Forces
(2011) · doi:10.1016/c2009-0-21560-1 · Cited by 871
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
Mechanisms of PVP in the preparation of silver nanoparticles
Wang, H., Qiao, X., Chen, J., Wang, X., & Ding, S. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.05.005 · Cited by 657
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes
Lv, D., Zheng, J., Li, Q., Xie, X., Ferrara, S., Nie, Z., Mehdi, L. B., Browning, N. D., Zhang, J., Graff, G. L., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402290 · Cited by 554
Thick Electrodes for High Energy Lithium Ion Batteries
Singh, M., Kaiser, J., & Hahn, H. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0401507jes · Cited by 455
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Shen, F., Luo, W., Dai, J., Yao, Y., Zhu, M., Hitz, E., Tang, Y., Chen, Y., Sprenkle, V. L., Li, X., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600377 · Cited by 318
Kraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
Zhao, R. L., Liu, J., & Gu, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.11.051 · Cited by 289
3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries
Liu, W., Chen, Z., Zhou, G., Sun, Y., Lee, H. R., Liu, C., Yao, H., Bao, Z., & Cui, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505299 · Cited by 287
Lithium‐Ion Textile Batteries with Large Areal Mass Loading
Hu, L., La Mantia, F., Wu, H., Xie, X., McDonough, J., Pasta, M., & Cui, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100261 · Cited by 257
Folding Paper-Based Lithium-Ion Batteries for Higher Areal Energy Densities
Cheng, Q., Song, Z., Ma, T., Smith, B. B., Tang, R., Yu, H., Jiang, H., & Chan, C. K. (2013) · Nano Letters · doi:10.1021/nl4030374 · Cited by 234
Structural and thermodynamic stability of Li4Ti5O12 anode material for lithium-ion battery
Yi, T.-F., Xie, Y., Zhu, Y.-R., Zhu, R.-S., & Shen, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.020 · Cited by 230
The energy-storage frontier: Lithium-ion batteries and beyond
Crabtree, G., Kócs, E., & Trahey, L. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.259 · Cited by 227
A Gum‐Like Lithium‐Ion Battery Based on a Novel Arched Structure
Weng, W., Sun, Q., Zhang, Y., He, S., Wu, Q., Deng, J., Fang, X., Guan, G., Ren, J., & Peng, H. (2015) · Advanced Materials · doi:10.1002/adma.201405127 · Cited by 223
A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design
Gaikwad, A. M., Khau, B. V., Davies, G., Hertzberg, B., Steingart, D. A., & Arias, A. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401389 · Cited by 211
Youssry, M., Madec, L., Soudan, P., Cerbelaud, M., Guyomard, D., & Lestriez, B. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51371h · Cited by 186
Lai, W., Erdonmez, C. K., Marinis, T. F., Bjune, C. K., Dudney, N. J., Xu, F., Wartena, R., & Chiang, Y. (2010) · Advanced Materials · doi:10.1002/adma.200903650 · Cited by 178
Jiang, F., & Peng, P. (2016) · Scientific Reports · doi:10.1038/srep32639 · Cited by 159
Avoiding Cracks in Nanoparticle Films
Prosser, J. H., Brugarolas, T., Lee, S., Nolte, A. J., & Lee, D. (2012) · Nano Letters · doi:10.1021/nl302555k · Cited by 155
Design of Aqueous Processed Thick LiFePO[sub 4] Composite Electrodes for High-Energy Lithium Battery
Porcher, W., Lestriez, B., Jouanneau, S., et al. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3046129 · Cited by 144
Analysis of the Implications of Rapid Charging on Lithium-Ion Battery Performance
Hasan, M., Chen, C.-F., Shaffer, C., & Mukherjee, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0871507jes · Cited by 72
Electrospun titania-based fibers for high areal capacity Li-ion battery anodes
Self, E. C., Wycisk, R. J., & Pintauro, P. N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.036 · Cited by 52
Columnar order in jammed LiFePO4 cathodes: ion transport catastrophe and its mitigation
Smith, K. C., Mukherjee, P. P., & Fisher, T. S. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40135e · Cited by 42
Structure and dynamics of biphasic colloidal mixtures
Mohraz, A., Weeks, E. R., & Lewis, J. A. (2008) · Physical Review E · doi:10.1103/physreve.77.060403 · Cited by 32
Self-citation
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Grayscale digital light processing 3D printing for highly functionally graded materials
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., Fang, D., & Qi, H. J. (2019) · Science Advances · doi:10.1126/sciadv.aav5790 · Cited by 568
Metadata
- Authors
- Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-03-15
- Volume
- 30
- Issue
- 16
- Pages
- e1703027-e1703027
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2790201204
- Cited by
- 434
- References
- 37
- FWCI
- 17.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.