The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Abstract
The growing demand for rechargeable lithium‐ion batteries (LIBs) with higher capacity in customized geometries underscores the need for new battery materials, architectures, and assembly strategies. Here, the design, fabrication, and electrochemical performance of fully 3D printed LIBs composed of thick semisolid electrodes that exhibit high areal capacity are reported. Specifically, semisolid cathode and anode inks, as well as UV curable packaging and separator inks for direct writing of LIBs in arbitrary geometries are created. These fully 3D printed and packaged LIBs, which are encased between two glassy carbon current collectors, deliver an areal capacity of 4.45 mAh cm−2 at a current density of 0.14 mA cm−2, which is equivalent to 17.3 Ah L−1. The ability to produce high‐performance LIBs in customized form factors opens new avenues for integrating batteries directly within 3D printed objects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes
Liu, N., Lu, Z., Zhao, J., McDowell, M. T., Lee, H.-W., Zhao, W., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.6 · Cited by 2,491
True Performance Metrics in Electrochemical Energy Storage
Gogotsi, Y., & Simon, P. (2011) · Science · doi:10.1126/science.1213003 · Cited by 2,440
Rapidly falling costs of battery packs for electric vehicles
Nykvist, B., & Nilsson, M. (2015) · Nature Climate Change · doi:10.1038/nclimate2564 · Cited by 1,819
Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)
Zhang, L., Jiang, Y., Ding, Y., Povey, M., & York, D. (2007) · Journal of Nanoparticle Research · doi:10.1007/s11051-006-9150-1 · Cited by 1,490
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Self-citationThree-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes
Zhang, H., Yu, X., & Braun, P. V. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.38 · Cited by 1,072
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Palacín, M. R., & de Guibert, A. (2016) · Science · doi:10.1126/science.1253292 · Cited by 871
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Grayscale digital light processing 3D printing for highly functionally graded materials
Kuang, X., Wu, J., Chen, K., Zhao, Z., Ding, Z., Hu, F., Fang, D., & Qi, H. J. (2019) · Science Advances · doi:10.1126/sciadv.aav5790 · Cited by 568
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Gaharwar, A. K., Cross, L. M., Peak, C. W., Gold, K., Carrow, J. K., Brokesh, A., & Singh, K. A. (2019) · Advanced Materials · doi:10.1002/adma.201900332 · Cited by 402
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Design and Manufacture of 3D-Printed Batteries
Lyu, Z., Lim, G. J. H., Koh, J. J., Li, Y., Ma, Y., Ding, J., Wang, J., Hu, Z., Wang, J., Chen, W., et al. (2021) · Joule · doi:10.1016/j.joule.2020.11.010 · Cited by 321
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Flexible Energy Storage Devices to Power the Future
He, J., Cao, L., Cui, J., Fu, G., Jiang, R., Xu, X., & Guan, C. (2024) · Advanced Materials · doi:10.1002/adma.202306090 · Cited by 286
Recent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010004 · Cited by 258
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Ultrahigh-printing-speed photoresists for additive manufacturing
Liu, T., Tao, P., Wang, X., Wang, H., He, M., Wang, Q., Cui, H., Wang, J., Tang, Y., Tang, J., et al. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01517-w · Cited by 63
Metadata
- Authors
- Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-03-15
- Volume
- 30
- Issue
- 16
- Pages
- e1703027-e1703027
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2790201204
- Cited by
- 434
- References
- 37
- FWCI
- 17.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.