The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Efficient, Hysteresis‐Free, and Stable Perovskite Solar Cells with ZnO as Electron‐Transport Layer: Effect of Surface Passivation
Abstract
The power conversion efficiency of perovskite solar cells (PSCs) has ascended from 3.8% to 22.1% in recent years. ZnO has been well‐documented as an excellent electron‐transport material. However, the poor chemical compatibility between ZnO and organo‐metal halide perovskite makes it highly challenging to obtain highly efficient and stable PSCs using ZnO as the electron‐transport layer. It is demonstrated in this work that the surface passivation of ZnO by a thin layer of MgO and protonated ethanolamine (EA) readily makes ZnO as a very promising electron‐transporting material for creating hysteresis‐free, efficient, and stable PSCs. Systematic studies in this work reveal several important roles of the modification: (i) MgO inhibits the interfacial charge recombination, and thus enhances cell performance and stability; (ii) the protonated EA promotes the effective electron transport from perovskite to ZnO, further fully eliminating PSCs hysteresis; (iii) the modification makes ZnO compatible with perovskite, nicely resolving the instability of ZnO/perovskite interface. With all these findings, PSCs with the best efficiency up to 21.1% and no hysteresis are successfully fabricated. PSCs stable in air for more than 300 h are achieved when graphene is used to further encapsulate the cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationImproved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Ke, W., Fang, G., Liu, Q., Xiong, L., Qin, P., Tao, H., Wang, J., Lei, H., Li, B., Wan, J., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b01994 · Cited by 1,228
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
The rapid evolution of highly efficient perovskite solar cells
Correa-Baena, J.-P., Abate, A., Saliba, M., Tress, W., Jesper Jacobsson, T., Grätzel, M., & Hagfeldt, A. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03397k · Cited by 1,140
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Thermal conductivity of isotopically modified graphene
Chen, S., Wu, Q., Mishra, C., Kang, J., Zhang, H., Cho, K., Cai, W., Balandin, A. A., & Ruoff, R. S. (2012) · Nature Materials · doi:10.1038/nmat3207 · Cited by 980
11% Efficient Perovskite Solar Cell Based on ZnO Nanorods: An Effective Charge Collection System
Son, D.-Y., Im, J.-H., Kim, H.-S., & Park, N.-G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp412407j · Cited by 701
Zuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Yin, Z., Wei, J., & Zheng, Q. (2016) · Advanced Science · doi:10.1002/advs.201500362 · Cited by 481
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency
Liu, D., Yang, J., & Kelly, T. L. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508758k · Cited by 460
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445
Lafkioti, M., Krauss, B., Lohmann, T., Zschieschang, U., Klauk, H., Klitzing, K. V., & Smet, J. H. (2010) · Nano Letters · doi:10.1021/nl903162a · Cited by 424
The Rise of Highly Efficient and Stable Perovskite Solar Cells
Grätzel, M. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00492 · Cited by 375
Bai, Y., Chen, H., Xiao, S., Xue, Q., Zhang, T., Zhu, Z., Li, Q., Hu, C., Yang, Y., Hu, Z., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505215 · Cited by 351
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
Self-citationCao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Self-citationMahmood, K., Swain, B. S., & Amassian, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500568 · Cited by 252
Engineering of Electron-Selective Contact for Perovskite Solar Cells with Efficiency Exceeding 15%
Hu, Q., Wu, J., Jiang, C., Liu, T., Que, X., Zhu, R., & Gong, Q. (2014) · ACS Nano · doi:10.1021/nn5029828 · Cited by 245
Yu, J. C., Kim, D. B., Baek, G., Lee, B. R., Jung, E. D., Lee, S., Chu, J. H., Lee, D., Choi, K. J., Cho, S., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500465 · Cited by 221
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Cao, J., Yin, J., Yuan, S., Zhao, Y., Li, J., & Zheng, N. (2015) · Nanoscale · doi:10.1039/c5nr01820j · Cited by 212
Self-citationHan, G. S., Chung, H. S., Kim, B. J., Kim, D. H., Lee, J. W., Swain, B. S., Mahmood, K., Yoo, J. S., Park, N.-G., Lee, J. H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta03684k · Cited by 185
Dkhil, S. B., Duché, D., Gaceur, M., Thakur, A. K., Aboura, F. B., Escoubas, L., Simon, J., Guerrero, A., Bisquert, J., García-Belmonte, G., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400805 · Cited by 105
Yin, Z., Zheng, Q., Chen, S., Cai, D., & Ma, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501493 · Cited by 84
Gao, Y., Dai, Z., Zhang, J., Ma, X., Tang, N., & Wu, J. (2013) · Inorganic Chemistry · doi:10.1021/ic401459a · Cited by 62
Cited by
Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Chen, J., Zhao, X., Kim, S., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201902902 · Cited by 527
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Metadata
- Authors
- Cao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-01-19
- Volume
- 30
- Issue
- 11
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2794130057
- Cited by
- 447
- References
- 45
- FWCI
- 26.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.