The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Abstract
A highly porous 2D nanomaterial, holey graphene oxide (hGO), is synthesized directly from holey graphene powder and employed to create an aqueous 3D printable ink without the use of additives or binders. Stable dispersions of hydrophilic hGO sheets in water (≈100 mg mL−1) can be readily achieved. The shear‐thinning behavior of the aqueous hGO ink enables extrusion‐based printing of fine filaments into complex 3D architectures, such as stacked mesh structures, on arbitrary substrates. The freestanding 3D printed hGO meshes exhibit trimodal porosity: nanoscale (4–25 nm through‐holes on hGO sheets), microscale (tens of micrometer‐sized pores introduced by lyophilization), and macroscale (<500 µm square pores of the mesh design), which are advantageous for high‐performance energy storage devices that rely on interfacial reactions to promote full active‐site utilization. To elucidate the benefit of (nano)porosity and structurally conscious designs, the additive‐free architectures are demonstrated as the first 3D printed lithium–oxygen (Li–O 2) cathodes and characterized alongside 3D printed GO‐based materials without nanoporosity as well as nanoporous 2D vacuum filtrated films. The results indicate the synergistic effect between 2D nanomaterials, hierarchical porosity, and overall structural design, as well as the promise of a freeform generation of high‐energy‐density battery systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage
Sun, H., Mei, L., Liang, J., Zhao, Z., Lee, C., Fei, H., Ding, M., Lau, J., Li, M., Wang, C., et al. (2017) · Science · doi:10.1126/science.aam5852 · Cited by 1,461
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Self-citationSupercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Self-citationJakus, A. E., Secor, E. B., Rutz, A. L., Jordan, S. W., Hersam, M. C., & Shah, R. N. (2015) · ACS Nano · doi:10.1021/acsnano.5b01179 · Cited by 710
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Zhao, X., Hayner, C. M., Kung, M. C., & Kung, H. H. (2011) · ACS Nano · doi:10.1021/nn202710s · Cited by 522
Electrocatalysts for Nonaqueous Lithium–Air Batteries: Status, Challenges, and Perspective
Shao, Y., Park, S., Xiao, J., Zhang, J.-G., Wang, Y., & Liu, J. (2012) · ACS Catalysis · doi:10.1021/cs300036v · Cited by 457
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Self-citationRuthenium-Based Electrocatalysts Supported on Reduced Graphene Oxide for Lithium-Air Batteries
Jung, H.-G., Jeong, Y. S., Park, J.-B., Sun, Y.-K., Scrosati, B., & Lee, Y. J. (2013) · ACS Nano · doi:10.1021/nn400477d · Cited by 382
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Lithium–oxygen batteries—Limiting factors that affect performance
Padbury, R. P., & Zhang, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.032 · Cited by 348
Sun, B., Huang, X., Chen, S., Munroe, P., & Wang, G. (2014) · Nano Letters · doi:10.1021/nl500397y · Cited by 344
Highly Rechargeable Lithium‐CO2 Batteries with a Boron‐ and Nitrogen‐Codoped Holey‐Graphene Cathode
Qie, L., Lin, Y., Connell, J. W., Xu, J., & Dai, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701826 · Cited by 337
Self-citationPrinting in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Moon, S. K., Tan, Y. E., Hwang, J., & Yoon, Y.-J. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0028-x · Cited by 299
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Han, X., Funk, M. R., Shen, F., Chen, Y.-C., Li, Y., Campbell, C. J., Dai, J., Yang, X., Kim, J.-W., Liao, Y., et al. (2014) · ACS Nano · doi:10.1021/nn502635y · Cited by 235
Self-citationThree dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Holey Graphene Nanomanufacturing: Structure, Composition, and Electrochemical Properties
Lin, Y., Han, X., Campbell, C. J., Kim, J., Zhao, B., Luo, W., Dai, J., Hu, L., & Connell, J. W. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500321 · Cited by 165
Self-citationUltrahigh-Capacity Lithium–Oxygen Batteries Enabled by Dry-Pressed Holey Graphene Air Cathodes
Lin, Y., Moitoso, B., Martinez‐Martinez, C., Walsh, E. D., Lacey, S. D., Kim, J.-W., Dai, L., Hu, L., & Connell, J. W. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00872 · Cited by 148
Self-citationNitrogen-Doped Holey Graphene for High-Performance Rechargeable Li–O2 Batteries
Shui, J., Lin, Y., Connell, J. W., Xu, J., Fan, X., & Dai, L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00128 · Cited by 129
Self-citationXu, J., Lin, Y., Connell, J. W., & Dai, L. (2015) · Small · doi:10.1002/smll.201501848 · Cited by 125
Self-citationPrinting nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
A facile approach to produce holey graphene and its application in supercapacitors
Peng, Y.-Y., Liu, Y.-M., Chang, J., Wu, C.-H., Ger, M.-D., Pu, N., & Chang, C.-L. (2014) · Carbon · doi:10.1016/j.carbon.2014.09.067 · Cited by 98
Walsh, E. D., Han, X., Lacey, S. D., Kim, J.-W., Connell, J. W., Hu, L., & Lin, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09951 · Cited by 81
Self-citationFree-standing flexible graphene oxide paper electrode for rechargeable Li–O2 batteries
Cetinkaya, T., Özcan, Ş., Uysal, M., Güler, M. O., & Akbulut, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.081 · Cited by 65
Zeng, X., You, C., Leng, L., Dang, D., Qiao, X., Li, X., Li, Y., Liao, S., & Adžić, R. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01887k · Cited by 63
Self-citationIon Intercalation Induced Capacitance Improvement for Graphene‐Based Supercapacitor Electrodes
Liu, T., Zhu, C. Y., Kou, T., Worsley, M. A., Qian, F., Condes, C., Duoss, E. B., Spadaccini, C. M., & Li, Y. (2016) · ChemNanoMat · doi:10.1002/cnma.201600107 · Cited by 53
Self-citationInvestigation of Promising Air Electrode for Realizing Ultimate Lithium Oxygen Battery
Luo, W., Gao, X., Chou, S., Kang, Y., Wang, J., Liu, H., & Dou, S. X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700234 · Cited by 51
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Self-citationHierarchical 3D electrodes for electrochemical energy storage
Sun, H., Zhu, J., Baumann, D., Peng, L., Xu, Y., Shakir, I., Huang, Y., & Duan, X. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0069-9 · Cited by 805
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Metadata
- Authors
- Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., Xu, S., Raghavan, S. R., Connell, J. W., Lin, Y., & Hu, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-01-30
- Volume
- 30
- Issue
- 12
- Pages
- e1705651-e1705651
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2790524622
- Cited by
- 332
- References
- 36
- FWCI
- 12.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.