The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Polymer Nanocomposites with Ultrahigh Energy Density and High Discharge Efficiency by Modulating their Nanostructures in Three Dimensions
Abstract
Manipulating microstructures of composites in three dimensions has been a long standing challenge. An approach is proposed and demonstrated to fabricate artificial nanocomposites by controlling the 3D distribution and orientation of oxide nanoparticles in a polymer matrix. In addition to possessing much enhanced mechanical properties, these nanocomposites can sustain extremely high voltages up to ≈10 kV, exhibiting high dielectric breakdown strength and low leakage current. These nanocomposites show great promise in resolving the paradox between dielectric constant and breakdown strength, leading to ultrahigh electrical energy density (over 2000% higher than that of the bench‐mark polymer dielectrics) and discharge efficiency. This approach opens up a new avenue for the design and modulation of nanocomposites. It is adaptable to the roll‐to‐roll fabrication process and could be employed as a general technique for the mass production of composites with intricate nanostructures, which is otherwise not possible using conventional polymer processing techniques.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembly and Mineralization of Peptide-Amphiphile Nanofibers
Hartgerink, J. D., Beniash, E., & Stupp, S. I. (2001) · Science · doi:10.1126/science.1063187 · Cited by 3,601
A Dielectric Polymer with High Electric Energy Density and Fast Discharge Speed
Chu, B., Zhou, X., Ren, K., Neese, B., Lin, M., Wang, Q., Bauer, F., & Zhang, Q. M. (2006) · Science · doi:10.1126/science.1127798 · Cited by 2,453
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Self-citationTough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition
Mallick, P. K. (2007) · CRC Press eBooks · doi:10.1201/9781420005981 · Cited by 1,634
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Nanostructured artificial nacre
Tang, Z., Kotov, N. A., Magonov, S., & Ozturk, B. (2003) · Nature Materials · doi:10.1038/nmat906 · Cited by 1,454
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
Dang, Z., Yuan, J., Yao, S., & Liao, R. (2013) · Advanced Materials · doi:10.1002/adma.201301752 · Cited by 1,454
An Introduction to Composite Materials
Hull, D., & Clyne, T. W. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9781139170130 · Cited by 1,450
Homogeneous/Inhomogeneous‐Structured Dielectrics and their Energy‐Storage Performances
Yao, Z., Song, Z., Hao, H., Yu, Z., Cao, M., Zhang, S., Lanagan, M. T., & Liu, H. (2017) · Advanced Materials · doi:10.1002/adma.201601727 · Cited by 1,231
Bioinspired Design and Assembly of Platelet Reinforced Polymer Films
Bonderer, L. J., Studart, A. R., & Gauckler, L. J. (2008) · Science · doi:10.1126/science.1148726 · Cited by 1,031
Carbon fiber reinforced plastics in aircraft construction
Soutis, C. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.08.064 · Cited by 876
High Energy Density Nanocomposites Based on Surface-Modified BaTiO3 and a Ferroelectric Polymer
Kim, P., Doss, N. M., Tillotson, J. P., Hotchkiss, P. J., Pan, M.-J., Marder, S. R., Li, J., Calame, J. P., & Perry, J. W. (2009) · ACS Nano · doi:10.1021/nn9006412 · Cited by 818
Nano-indentation of polymeric surfaces
Briscoe, B. J., Fiori, L., & Pelillo, E. (1998) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/31/19/006 · Cited by 760
Multifunctional composites using reinforced laminae with carbon-nanotube forests
Veedu, V. P., Cao, A., Li, X., Ma, K., Soldano, C., Kar, S., Ajayan, P. M., & Ghasemi-Nejhad, M. N. (2006) · Nature Materials · doi:10.1038/nmat1650 · Cited by 713
Status quo and future prospects for metallized polypropylene energy storage capacitors
Rabuffi, M., & Picci, G. (2002) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2002.805318 · Cited by 683
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Erb, R. M., Libanori, R., Rothfuchs, N., & Studart, A. R. (2012) · Science · doi:10.1126/science.1210822 · Cited by 675
Polymer-Based Dielectrics with High Energy Storage Density
Chen, Q., Shen, Y., Zhang, S., & Zhang, Q. M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021017 · Cited by 642
Self-citationDesigning bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
Dielectric Breakdown Process of Polymers
Ieda, M. (1980) · IEEE Transactions on Electrical Insulation · doi:10.1109/tei.1980.298314 · Cited by 449
Sarjeant, W. J., Zirnheld, J., & MacDougall, F. W. (1998) · IEEE Transactions on Plasma Science · doi:10.1109/27.736020 · Cited by 421
Trends in the ultimate breakdown strength of high dielectric-constant materials
McPherson, J. W., Kim, J., Shanware, A., Mogul, H., & Rodriguez, J. (2003) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2003.815141 · Cited by 389
Song, Y., Shen, Y., Liu, H., Lin, Y., Li, M., & Nan, C.-W. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32579a · Cited by 381
Self-citationGuo, N., DiBenedetto, S. A., Tewari, P., Lanagan, M. T., Ratner, M. A., & Marks, T. J. (2010) · Chemistry of Materials · doi:10.1021/cm902852h · Cited by 280
Jiang, B., Pang, X., Li, B., & Lin, Z. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06736 · Cited by 131
Cited by
Perovskite lead-free dielectrics for energy storage applications
Yang, L., Kong, X., Li, F., Hao, H., Cheng, Z., Liu, H., Li, J.-F., & Zhang, S. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.005 · Cited by 1,957
Interface design for high energy density polymer nanocomposites
Luo, H., Zhou, X., Ellingford, C., Zhang, Y., Chen, S., Zhou, K., Zhang, D., Bowen, C. R., & Wan, C. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00043g · Cited by 799
High-k polymer nanocomposites with 1D filler for dielectric and energy storage applications
Huang, X., Sun, B., Zhu, Y., Li, S., & Jiang, P. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.10.003 · Cited by 550
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Polymer nanocomposite dielectrics for capacitive energy storage
Yang, M., Guo, M., Xu, E., Ren, W., Wang, D., Li, S., Zhang, S., Nan, C.-W., & Shen, Y. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01541-w · Cited by 423
Self-citation
Metadata
- Authors
- Zhang, X., Jiang, J., Shen, Z., Dan, Z., Li, M., Lin, Y., Nan, C., Chen, L., & Shen, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-03-13
- Volume
- 30
- Issue
- 16
- Pages
- e1707269-e1707269
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2793213596
- Cited by
- 322
- References
- 26
- FWCI
- 14.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.