The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Abstract
Additive manufacturing (AM) is a current technology undergoing rapid development that is utilized in a wide variety of applications. In the field of biological and bioinspired materials, additive manufacturing is being used to generate intricate prototypes to expand our understanding of the fundamental structure–property relationships that govern nature's spectacular mechanical performance. Herein, recent advances in the use of AM for improving the understanding of the structure–property relationship in biological materials and for the production of bioinspired materials are reviewed. There are four essential components to this work: a) extracting defining characteristics of biological designs, b) designing 3D‐printed prototypes, c) performing mechanical testing on 3D‐printed prototypes to understand fundamental mechanisms at hand, and d) optimizing design for tailorable performance. It is intended to highlight how the various types of additive manufacturing methods are utilized, to unravel novel discoveries in the field of biological materials. Since AM processing techniques have surpassed antiquated limitations, especially with respect to spatial scales, there has been a surge in their demand as an integral tool for research. In conclusion, current challenges and the technical perspective for further development of bioinspired materials using AM are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Self-citationFrom 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs
Huang, W., Restrepo, D., Jung, J., Su, F. Y., Liu, Z., Ritchie, R. O., McKittrick, J., Zavattieri, P., & Kisailus, D. (2019) · Advanced Materials · doi:10.1002/adma.201901561 · Cited by 662
Bioinspired marine antifouling coatings: Status, prospects, and future
Jin, H., Tian, L., Bing, W., Zhao, J., & Ren, L. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100889 · Cited by 585
Metadata
- Authors
- Velasco‐Hogan, A., Xu, J., & Meyers, M. A.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-08-22
- Volume
- 30
- Issue
- 52
- Pages
- e1800940-e1800940
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2888041680
- Cited by
- 247
- References
- 9
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures. https://app.cochat.ai/papers/10.1002/adma.201800940
- The paper
- Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018). Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures. Advanced Materials. https://doi.org/10.1002/adma.201800940
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.