The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Incorporating Ionic Paths into 3D Conducting Scaffolds for High Volumetric and Areal Capacity, High Rate Lithium‐Metal Anodes
Abstract
Lithium‐metal batteries can fulfill the ever‐growing demand of the high‐energy‐density requirement of electronics and electric vehicles. However, lithium‐metal anodes have many challenges, especially their inhomogeneous dendritic formation and infinite dimensional change during cycling. 3D scaffold design can mitigate electrode thickness fluctuation and regulate the deposition morphology. However, in an insulating or ion‐conducting matrix, Li as the exclusive electron conductor can become disconnected, whereas in an electron‐conducting matrix, the rate performance is restrained by the sluggish Li+ diffusion. Herein, the advantages of both ion‐ and electron‐conducting paths are integrated into a mixed scaffold. In the mixed ion‐ and electron‐conducting network, the charge diffusion and distribution are facilitated leading to significantly improved electrochemical performance. By incorporating Li 6.4 La 3 Zr 2 Al 0.2 O 12 nanoparticles into 3D carbon nanofibers scaffold, the Li metal anodes can deliver areal capacity of 16 mAh cm−2, volumetric capacity of 1600 mAh cm−3, and remain stable over 1000 h under current density of 5 mA cm−2. The volumetric and areal capacities as well as the rate capability are among the highest values reported. It is anticipated that the 3D mixed scaffold could be combined with further electrolytes and cathodes to develop high‐performance energy systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Liu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Sheng, O., Zheng, J., Ju, Z., Jin, C., Wang, Y., Chen, M., Nai, J., Liu, T., Zhang, W., Liu, Y., et al. (2020) · Advanced Materials · doi:10.1002/adma.202000223 · Cited by 463
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Solid–Solution-Based Metal Alloy Phase for Highly Reversible Lithium Metal Anode
Jin, S., Ye, Y., Niu, Y., Xu, Y., Jin, H., Wang, J., Sun, Z., Cao, A., Wu, X., Luo, Y., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c01811 · Cited by 391
Metadata
- Authors
- Zhang, C., Liu, S., Li, G., Zhang, C., Liu, X., & Luo, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-07
- Volume
- 30
- Issue
- 33
- Pages
- e1801328-e1801328
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2809801657
- Cited by
- 189
- References
- 1
- FWCI
- 10.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.