The DOI matches its Crossref record; 205 of the 205 references it cites were found in a registry or an index.
Interface and Defect Engineering for Metal Halide Perovskite Optoelectronic Devices
Abstract
Metal halide perovskites have been in the limelight in recent years due to their enormous potential for use in optoelectronic devices, owing to their unique combination of properties, such as high absorption coefficient, long charge‐carrier diffusion lengths, and high defect tolerance. Perovskite‐based solar cells and light‐emitting diodes (LEDs) have achieved remarkable breakthroughs in a comparatively short amount of time. As of writing, a certified power conversion efficiency of 22.7% and an external quantum efficiency of over 10% have been achieved for perovskite solar cells and LEDs, respectively. Interfaces and defects have a critical influence on the properties and operational stability of metal halide perovskite optoelectronic devices. Therefore, interface and defect engineering are crucial to control the behavior of the charge carriers and to grow high quality, defect‐free perovskite crystals. Herein, a comprehensive review of various strategies that attempt to modify the interfacial characteristics, control the crystal growth, and understand the defect physics in metal halide perovskites, for both solar cell and LED applications, is presented. Lastly, based on the latest advances and breakthroughs, perspectives and possible directions forward in a bid to transcend what has already been achieved in this vast field of metal halide perovskite optoelectronic devices are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–205 of 205
Abulikemu, M., Neophytou, M., Barbé, J. M., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00975e · Cited by 51
Simple O2Plasma-Processed V2O5as an Anode Buffer Layer for High-Performance Polymer Solar Cells
Bao, X., Zhu, Q., Wang, T., Guo, J. K., Yang, C., Yu, D., Wang, N., Chen, W., & Yang, R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00091 · Cited by 49
Huang, C.-F., Keshtov, M. L., & Chen, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08106 · Cited by 47
Lee, J., Park, S., Ko, M. J., Son, H. J., & Park, N. (2014) · ChemPhysChem · doi:10.1002/cphc.201402033 · Cited by 45
Self-citationLi, J., Yu, Q., Gan, L., Chen, D., Lu, B., Ye, Z., & He, H. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01809f · Cited by 25
Research works printed but not linked: 47
- 10.1002/admi.201600694 · doi:10.1002/admi.201600694
- Lei M., 2016, Adv. Mater., 29, 1603826
- Dong R., 2015, Adv. Mater., 13, 476
- 10.1038/s41563-018-0069-6 · doi:10.1038/s41563-018-0069-6
- 10.1063/1.4802841 · doi:10.1063/1.4802841
- 10.1016/j.optmat.2009.07.014 · doi:10.1016/j.optmat.2009.07.014
- 10.1002/adma.201104316 · doi:10.1002/adma.201104316
- 10.1016/j.solmat.2012.02.019 · doi:10.1016/j.solmat.2012.02.019
- 10.1021/am5072628 · doi:10.1021/am5072628
- 10.1021/acsami.5b11791 · doi:10.1021/acsami.5b11791
- 10.1002/adom.201600512 · doi:10.1002/adom.201600512
- 10.1126/sciadv.1601428 · doi:10.1126/sciadv.1601428
- 10.1002/adma.201700579 · doi:10.1002/adma.201700579
- 10.1016/S0379-6779(98)80033-7 · doi:10.1016/s0379-6779(98)80033-7
- 10.1038/srep00591 · DOI · Paper page
- Lee M. M., 2012, Science, 2, 338
- 10.1126/science.aan2301 · DOI · Paper page
- 10.1021/acs.nanolett.6b02158 · doi:10.1021/acs.nanolett.6b02158
- 10.1002/aenm.201600401 · doi:10.1002/aenm.201600401
- 10.1016/j.chempr.2017.03.011 · doi:10.1016/j.chempr.2017.03.011
- 10.1002/anie.201404213 · doi:10.1002/anie.201404213
- 10.1126/science.aao5561 · DOI
- 10.1021/jp101586q · doi:10.1021/jp101586q
- Yichuan L., 2015, Adv. Mater., 28, 305
- 10.1016/S1468-6996(03)00064-0 · doi:10.1016/s1468-6996(03)00064-0
- 10.1002/aenm.201700226 · doi:10.1002/aenm.201700226
- 10.1039/C8TA00816G · doi:10.1039/c8ta00816g
- 10.1038/srep20131 · doi:10.1038/srep20131
- 10.1016/j.jpowsour.2015.02.084 · doi:10.1016/j.jpowsour.2015.02.084
- 10.1016/j.nanoen.2016.08.035 · doi:10.1016/j.nanoen.2016.08.035
- Mat Teridi M. A., 2017, J. Mater. Chem. C, 6, 682
- 10.1039/C6TA09174A · doi:10.1039/c6ta09174a
- 10.1021/acsami.5b12849 · doi:10.1021/acsami.5b12849
- 2016, Adv. Funct. Mater., 27, 1603219
- 10.1038/s41467-018-04385-4 · doi:10.1038/s41467-018-04385-4
- 10.1021/jp506991x · doi:10.1021/jp506991x
- 10.1002/adfm.201604018 · doi:10.1002/adfm.201604018
- Qian W., 2018, Adv. Energy Mater., 0, 1800007
- Thanh N. T. K., 2014, Chem, 3, 7610
- 10.1557/mrs.2015.166 · doi:10.1557/mrs.2015.166
- 10.1002/cssc.201403442 · doi:10.1002/cssc.201403442
- Rice J. E., 2014, Org. Chem. Concepts Appl. Med. Chem., 67
- Of S. C., 2013, J. Chem. Soc. Dalt. Trans., 22, 22
- 10.1021/acs.jpclett.7b03417 · doi:10.1021/acs.jpclett.7b03417
- 10.1002/solr.201800055 · doi:10.1002/solr.201800055
- 10.1021/acs.jpclett.7b01733 · doi:10.1021/acs.jpclett.7b01733
- 10.1038/ncomms12806 · DOI · Paper page
Cited by
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Defect passivation strategies in perovskites for an enhanced photovoltaic performance
Fu, L., Li, H., Wang, L., Yin, R., Li, B., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01767a · Cited by 463
Charge transfer rates and electron trapping at buried interfaces of perovskite solar cells
Levine, I., Al-Ashouri, A., Musiienko, A., Hempel, H., Magomedov, A., Drevilkauskaite, A., Getautis, V., Menzel, D., Hinrichs, K., Unold, T., et al. (2021) · Joule · doi:10.1016/j.joule.2021.07.016 · Cited by 461
A roadmap for the commercialization of perovskite light emitters
Han, T.-H., Jang, K. Y., Dong, Y., Friend, R. H., Sargent, E. H., & Lee, T.-W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00459-4 · Cited by 449
Self-citation
Metadata
- Authors
- Han, T., Tan, S., Xue, J., Meng, L., Lee, J., & Yang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-02-14
- Volume
- 31
- Issue
- 47
- Pages
- e1803515-e1803515
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2914145088
- Cited by
- 481
- References
- 205
- FWCI
- 21.24
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Funders
- Air Force Office of Scientific Research (FA9550‐15‐1‐0333)
- Office of Naval Research (N00014‐17‐1‐2484)
- National Science Foundation (ECCS‐EPMD‐1509955)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.