The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual‐Phase High‐Entropy Alloys
Abstract
Microstructural length‐scale refinement is among the most efficient approaches to strengthen metallic materials. Conventional methods for refining microstructures generally involve grain size reduction via heavy cold working, compromising the material's ductility. Here, a fundamentally new approach that allows load‐driven formation and permanent refinement of a hierarchical nanolaminate structure in a novel high‐entropy alloy containing multiple principal elements is reported. This is achieved by triggering both, dynamic forward transformation from a faced‐centered‐cubic γ matrix into a hexagonal‐close‐packed ε nanolaminate structure and the dynamic reverse transformation from ε into γ. This new mechanism is referred to as the “bidirectional transformation induced plasticity” (B‐TRIP) effect, which is enabled through a near‐zero yet positive stacking fault energy of γ. Modulation of directionality in the transformation is triggered by local dissipative heating and local micromechanical fields. The simple thermodynamic and kinetic foundations for the B‐TRIP effect render this approach generally suited for designing metastable strong and ductile bulk materials with hierarchical nanolaminate substructures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Self-citationUltrahigh Strength and High Electrical Conductivity in Copper
Lu, L., Shen, Y., Chen, X., Qian, L., & Lu, K. (2004) · Science · doi:10.1126/science.1092905 · Cited by 3,366
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Estrin, Y. Z., & Vinogradov, A. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.038 · Cited by 1,833
Making strong nanomaterials ductile with gradients
Lu, K. (2014) · Science · doi:10.1126/science.1255940 · Cited by 1,173
Severe plastic deformation (SPD) processes for metals
Azushima, A., Kopp, R., Korhonen, A., Yang, D. Y., Micari, F., Lahoti, G. D., Groche, P., Yanagimoto, J., Tsuji, N., Rosochowski, A., et al. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.005 · Cited by 1,056
Grain boundary stability governs hardening and softening in extremely fine nanograined metals
Hu, J., Shi, Y. N., Sauvage, X., Sha, G., & Lu, K. (2017) · Science · doi:10.1126/science.aal5166 · Cited by 900
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Self-citationLi, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Self-citationXu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
On the grain size softening in nanocrystalline materials
CONRAD, H., & Narayan, J. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00320-1 · Cited by 429
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Koyama, M., Zhang, Z., Wang, M., Ponge, D., Raabe, D., Tsuzaki, K., Noguchi, H., & Tasan, C. C. (2017) · Science · doi:10.1126/science.aal2766 · Cited by 413
Self-citationLi, Z., Körmann, F., Grabowski, B., Neugebauer, J., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.023 · Cited by 397
Self-citationLi, Z., & Raabe, D. (2017) · JOM · doi:10.1007/s11837-017-2540-2 · Cited by 376
Self-citationWang, M.-M., Tasan, C. C., Ponge, D., Dippel, A.-C., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.010 · Cited by 281
Self-citationWang, M., Li, Z., & Raabe, D. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.036 · Cited by 242
Self-citationLee, S., Im, J., Yoo, Y., Bitzek, E., Kiener, D., Richter, G., Kim, B., & Oh, S. H. (2014) · Nature Communications · doi:10.1038/ncomms4033 · Cited by 195
Yang, X., Sun, S., & Zhang, T. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.034 · Cited by 181
On deformation behavior of Fe-Mn based structural alloys
Chowdhury, P. B., Canadinç, D., & Huseyin Sehitoglu, B. (2017) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2017.09.002 · Cited by 145
Nature-Inspired Hierarchical Steels
Cao, S. C., Liu, J., Zhu, L., Li, L., Dao, M., Lü, J., & Ritchie, R. O. (2018) · Scientific Reports · doi:10.1038/s41598-018-23358-7 · Cited by 74
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Metadata
- Authors
- Lu, W., Liebscher, C. H., Dehm, G., Raabe, D., & Li, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-09-14
- Volume
- 30
- Issue
- 44
- Pages
- e1804727-e1804727
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2890806115
- Cited by
- 288
- References
- 22
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.