The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Gel/Solid Polymer Electrolytes Characterized by In Situ Gelation or Polymerization for Electrochemical Energy Systems
Abstract
A gel polymer electrolyte (GPE) is a liquid electrolyte (LE) entrapped by a small amount of polymer network less than several wt%, which is characterized by properties between those of liquid and solid electrolytes in terms of the ionic conductivity and physical phase. Electrolyte leakage and flammability, demerits of liquid electrolytes, can be mitigated by using GPEs in electrochemical cells. However, the contact problems between GPEs and porous electrodes are challenging because it is difficult to incorporate GPEs into the pores and voids of electrodes. Herein, the focus is on GPEs that are gelated in situ within cells instead of covering comprehensive studies of GPEs. A mixture of LE and monomer or polymer in a liquid phase is introduced into a pre‐assembled cell without electrolyte, followed by thermal gelation based on physical gelation, monomer polymerization, or polymer cross‐linking. Therefore, GPEs are formed omnipresent in cells, covering the pores of electrode material particles, and even the pores of separators. As a result, different from ex situ formed GPEs, the in situ GPEs have no electrode/electrolyte contact problems. Functional GPEs are introduced as a more advanced form of GPEs, improving lithium‐ion transference number or capturing transition metals released from electrode materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,697
Review of gel-type polymer electrolytes for lithium-ion batteries
Song, J. Y., Wang, Y. Y., & Wan, C. C. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00193-1 · Cited by 1,491
Poly(ionic liquid)s: An update
Yuan, J., Mecerreyes, D., & Antonietti, M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.04.002 · Cited by 1,292
Gel Polymer Electrolytes for Electrochemical Energy Storage
Cheng, X., Pan, J., Zhao, Y., Liao, M., & Peng, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702184 · Cited by 1,020
Hydrate-melt electrolytes for high-energy-density aqueous batteries
Yamada, Y., Usui, K., Sodeyama, K., Ko, S., Tateyama, Y., & Yamada, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.129 · Cited by 1,005
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
Susan, M. A. B. H., Kaneko, T., Noda, A., & Watanabe, M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja045155b · Cited by 968
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Ionic‐Liquid‐Based Polymer Electrolytes for Battery Applications
Osada, I., de Vries, H., Scrosati, B., & Passerini, S. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504971 · Cited by 800
“Water‐in‐Salt” Electrolyte Makes Aqueous Sodium‐Ion Battery Safe, Green, and Long‐Lasting
Suo, L., Borodin, O., Wang, Y., Rong, X., Sun, W., Fan, X., Xu, S., Schroeder, M. A., Cresce, A. V., Wang, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701189 · Cited by 689
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 636
Analysis of Vinylene Carbonate Derived SEI Layers on Graphite Anode
Ota, H., Sakata, Y., Inoue, A., & Yamaguchi, S. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785795 · Cited by 553
Chai, J., Liu, Z., Ma, J., Wang, J., Liu, X., Liu, H., Zhang, J., Cui, G., & Chen, L. (2017) · Advanced Science · doi:10.1002/advs.201600377 · Cited by 538
A zwitterionic gel electrolyte for efficient solid-state supercapacitors
Peng, X., Liu, H., Yin, Q., Wu, J., Chen, P., Zhang, G., Liu, G., Wu, C., & Xie, Y. (2016) · Nature Communications · doi:10.1038/ncomms11782 · Cited by 496
Novel gel polymer electrolyte for high-performance lithium–sulfur batteries
Liu, M., Zhou, D., He, Y.-B., Fu, Y., Qin, X., Miao, C., Du, H., Li, B., Yang, Q.-H., Lin, Z., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.008 · Cited by 465
Wu, C., Lu, X., Peng, L., Xu, K., Peng, X., Huang, J., Yu, G., & Xie, Y. (2013) · Nature Communications · doi:10.1038/ncomms3431 · Cited by 417
Zhou, D., He, Y., Liu, R., Liu, M., Du, H., Li, B., Cai, Q., Yang, Q., & Kang, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500353 · Cited by 384
Progress in nitrile-based polymer electrolytes for high performance lithium batteries
Hu, P., Chai, J., Duan, Y., Liu, Z., Cui, G., & Chen, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02907h · Cited by 359
Shim, J., Kim, H. J., Kim, B. G., Kim, Y. S., Kim, D.-G., & Lee, J.-C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01095h · Cited by 351
Self-citationProgress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Liu, Z., Li, H., Zhu, M., Huang, Y., Tang, Z., Pei, Z., Wang, Z., Shi, Z., Liu, J., Huang, Y., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.006 · Cited by 269
Wang, Y., Nakamura, S., Tasaki, K., & Balbuena, P. B. (2002) · Journal of the American Chemical Society · doi:10.1021/ja017073i · Cited by 265
Choi, K., Cho, S., Kim, S., Kwon, Y. H., Kim, J. Y., & Lee, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301345 · Cited by 248
Zhou, D., Liu, R., Zhang, J., Qi, X., He, Y.-B., Li, B., Yang, Q.-H., Hu, Y.-S., & Kang, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.027 · Cited by 242
Flexible Aqueous Li‐Ion Battery with High Energy and Power Densities
Yang, C., Ji, X., Fan, X., Gao, T., Suo, L., Wang, F., Sun, W., Chen, J., Chen, L., Han, F., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701972 · Cited by 221
Unique aqueous Li-ion/sulfur chemistry with high energy density and reversibility
Yang, C., Suo, L., Borodin, O., Wang, F., Sun, W., Gao, T., Fan, X., Hou, S., Ma, Z., Amine, K., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1703937114 · Cited by 206
Kimura, K., Motomatsu, J., & Tominaga, Y. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b03277 · Cited by 204
Kimura, K., Yajima, M., & Tominaga, Y. (2016) · Electrochemistry Communications · doi:10.1016/j.elecom.2016.02.022 · Cited by 191
Solid-state Li/LiFePO4 polymer electrolyte batteries incorporating an ionic liquid cycled at 40°C
Shin, J.-H., Henderson, W. A., Scaccia, S., Prosini, P. P., & Passerini, S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.06.026 · Cited by 184
Chai, J., Liu, Z., Zhang, J., Sun, J., Tian, Z., Ji, Y., Tang, K., Zhou, X., & Cui, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02844 · Cited by 179
A Composite Gel–Polymer/Glass–Fiber Electrolyte for Sodium‐Ion Batteries
Gao, H., Guo, B., Song, J., Park, K., & Goodenough, J. B. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402235 · Cited by 178
Alkaline composite PEO–PVA–glass-fibre-mat polymer electrolyte for Zn–air battery
Yang, C., & Lin, S.-J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00438-x · Cited by 168
Polymeric Ionic Liquid Gel Electrolyte for Room Temperature Lithium Battery Applications
Safa, M., Chamaani, A., Chawla, N., & El‐Zahab, B. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.07.118 · Cited by 148
Zhang, P., Li, M., Yang, B., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502855 · Cited by 127
Lee, J. S., Shin, D. H., & Jang, J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02076j · Cited by 124
Ha, H. J., Kwon, Y. H., Kim, J. Y., & Lee, S. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.101 · Cited by 113
Poly(ethylene oxide) - LiCF3SO3 - polystyrene electrolyte systems
Gray, F. M., Maccallum, J. R., & Vincent, C. A. (1986) · Solid State Ionics · doi:10.1016/0167-2738(86)90127-x · Cited by 98
Polymer gel electrolytes for lithium batteries
Baskakova, Y. V., Yarmolenko, O. V., & Efimov, O. N. (2012) · Russian Chemical Reviews · doi:10.1070/rc2012v081n04abeh004210 · Cited by 72
Kim, Y., Cho, Y.-G., Odkhuu, D., Park, N., & Song, H. (2013) · Scientific Reports · doi:10.1038/srep01917 · Cited by 59
Self-citationCoffee-Driven Green Activation of Cellulose and Its Use for All-Paper Flexible Supercapacitors
Lee, D., Cho, Y.-G., Song, H., Chun, S., Park, S.-B., Choi, D., Lee, S., Yoo, J., & Lee, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05712 · Cited by 51
Self-citationPolymers from nitriles. VII. Polymerization of fumaronitrile with triethylamine as initiator
Wöuhrle, D., & Knothe, G. (1988) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1988.080260915 · Cited by 23
Cited by
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Alipoori, S., Mazinani, S., Aboutalebi, S. H., & Sharif, F. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101072 · Cited by 589
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Recent advances in carbon-based supercapacitors
Miao, L., Song, Z., Zhu, D., Li, L., Gan, L., & Liu, M. (2020) · Materials Advances · doi:10.1039/d0ma00384k · Cited by 340
Metadata
- Authors
- Cho, Y., Hwang, C., Cheong, D. S., Kim, Y., & Song, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-11-02
- Volume
- 31
- Issue
- 20
- Pages
- e1804909-e1804909
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2899098105
- Cited by
- 299
- References
- 46
- FWCI
- 7.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.