The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Improved Outcoupling Efficiency and Stability of Perovskite Light‐Emitting Diodes using Thin Emitting Layers
Abstract
Hybrid organic–inorganic perovskite semiconductors have shown potential to develop into a new generation of light‐emitting diode (LED) technology. Herein, an important design principle for perovskite LEDs is elucidated regarding optimal perovskite thickness. Adopting a thin perovskite layer in the range of 35–40 nm is shown to be critical for both device efficiency and stability improvements. Maximum external quantum efficiencies (EQEs) of 17.6% for Cs 0.2 FA 0.8 PbI 2.8 Br 0.2, 14.3% for CH 3 NH 3 PbI 3 (MAPbI 3), 10.1% for formamidinium lead iodide (FAPbI 3), and 11.3% for formamidinium lead bromide (FAPbBr 3)‐based LEDs are demonstrated with optimized perovskite layer thickness. Optical simulations show that the improved EQEs source from improved light outcoupling. Furthermore, elevated device temperature caused by Joule heating is shown as an important factor contributing to device degradation, and that thin perovskite emitting layers maintain lower junction temperature during operation and thus demonstrate increased stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Conings, B., Drijkoningen, J., Gauquelin, N., Babayigit, A., D'Haen, J., D'Olieslaeger, L., Ethirajan, A., Verbeeck, J., Manca, J., Mosconi, E., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500477 · Cited by 2,234
Sutherland, B. R., & Sargent, E. H. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.62 · Cited by 1,730
Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites
Xiao, Z., Kerner, R. A., Zhao, L., Tran, N. L., Lee, K. M., Koh, T.-W., Scholes, G. D., & Rand, B. P. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.269 · Cited by 1,374
Self-citationYi, C., Luo, J., Meloni, S., Boziki, A., Ashari-Astani, N., Grätzel, C., Zakeeruddin, S. M., Röthlisberger, U., & Grätzel, M. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03255e · Cited by 1,281
Yang, X., Zhang, X., Deng, J., Chu, Z., Jiang, Q., Meng, J., Wang, P., Zhang, L., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-02978-7 · Cited by 1,001
The chemical potential of radiation
Wurfel, P. (1982) · Journal of Physics C: Solid State Physics · doi:10.1088/0022-3719/15/18/012 · Cited by 995
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Improving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Continuous-wave lasing in an organic–inorganic lead halide perovskite semiconductor
Jia, Y., Kerner, R. A., Grede, A. J., Rand, B. P., & Giebink, N. C. (2017) · Nature Photonics · doi:10.1038/s41566-017-0047-6 · Cited by 442
Self-citationDiode-Pumped Organo-Lead Halide Perovskite Lasing in a Metal-Clad Distributed Feedback Resonator
Jia, Y., Kerner, R. A., Grede, A. J., Brigeman, A. N., Rand, B. P., & Giebink, N. C. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01946 · Cited by 216
Self-citationRadiative Recombination from Photoexcited Hot Carriers in GaAs
Shah, J., & Leite, R. C. C. (1969) · Physical Review Letters · doi:10.1103/physrevlett.22.1304 · Cited by 191
Zhao, L., Yeh, Y.-W., Tran, N. L., Wu, F., Xiao, Z., Kerner, R. A., Lin, Y. L., Scholes, G. D., Yao, N., & Rand, B. P. (2017) · ACS Nano · doi:10.1021/acsnano.7b00404 · Cited by 175
Self-citationHeiderhoff, R., Haeger, T., Pourdavoud, N., Hu, T., Al-Khafaji, M., Mayer, A., Chen, Y., Scheer, H., & Riedl, T. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b11495 · Cited by 131
Electrical Stress Influences the Efficiency of CH3NH3PbI3 Perovskite Light Emitting Devices
Zhao, L., Gao, J., Lin, Y. L., Yeh, Y., Lee, K. M., Yao, N., Loo, Y., & Rand, B. P. (2017) · Advanced Materials · doi:10.1002/adma.201605317 · Cited by 125
Self-citationZhao, L., Rolston, N., Lee, K. M., Zhao, X., Reyes‐Martinez, M. A., Tran, N. L., Yeh, Y., Yao, N., Scholes, G. D., Loo, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802060 · Cited by 109
Self-citationCan Trihalide Lead Perovskites Support Continuous Wave Lasing?
Cadelano, M., Sarritzu, V., Sestu, N., Marongiu, D., Chen, F., Piras, R., Corpino, R., Carbonaro, C. M., Quochi, F., Saba, M., et al. (2015) · Advanced Optical Materials · doi:10.1002/adom.201500229 · Cited by 82
Ultrasmooth metal halide perovskite thin films via sol–gel processing
Kerner, R. A., Zhao, L., Xiao, Z., & Rand, B. P. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03092k · Cited by 82
Self-citationOrganic-Inorganic Halide Perovskite Photovoltaics From Fundamentals to Device Architectures
Park, N., Grätzel, M., & Miyasaka, T. (2016) · International Linear Collider · Cited by 66
Cited by
Multi‐Resonance Induced Thermally Activated Delayed Fluorophores for Narrowband Green OLEDs
Zhang, Y., Zhang, D., Wei, J., Liu, Z., Lu, Y., & Duan, L. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201911266 · Cited by 609
High-performance quasi-2D perovskite light-emitting diodes: from materials to devices
Zhang, L., Sun, C., He, T., Jiang, Y., Wei, J., Huang, Y., & Yuan, M. (2021) · Light: Science & Applications · doi:10.1038/s41377-021-00501-0 · Cited by 522
Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes
Jiang, Y., Cui, M., Li, S., Sun, C., Huang, Y., Wei, J., Zhang, L., Lv, M., Qin, C., Liu, Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20555-9 · Cited by 469
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Perovskite Light‐Emitting Diodes with an External Quantum Efficiency Exceeding 30%
Bai, W., Xuan, T., Zhao, H., Dong, H., Cheng, X., Wang, L., & Xie, R. (2023) · Advanced Materials · doi:10.1002/adma.202302283 · Cited by 456
Metadata
- Authors
- Zhao, L., Lee, K. M., Roh, K., Khan, S. U. Z., & Rand, B. P.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2018-11-09
- Volume
- 31
- Issue
- 2
- Pages
- e1805836-e1805836
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2900358800
- Cited by
- 285
- References
- 19
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.