The DOI matches its Crossref record; 248 of the 248 references it cites were found in a registry or an index.
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Abstract
The urgent need for ecofriendly, stable, long‐lifetime power sources is driving the booming market for miniaturized and integrated electronics, including wearable and medical implantable devices. Flexible thermoelectric materials and devices are receiving increasing attention, due to their capability to convert heat into electricity directly by conformably attaching them onto heat sources. Polymer‐based flexible thermoelectric materials are particularly fascinating because of their intrinsic flexibility, affordability, and low toxicity. There are other promising alternatives including inorganic‐based flexible thermoelectrics that have high energy‐conversion efficiency, large power output, and stability at relatively high temperature. Herein, the state‐of‐the‐art in the development of flexible thermoelectric materials and devices is summarized, including exploring the fundamentals behind the performance of flexible thermoelectric materials and devices by relating materials chemistry and physics to properties. By taking insights from carrier and phonon transport, the limitations of high‐performance flexible thermoelectric materials and the underlying mechanisms associated with each optimization strategy are highlighted. Finally, the remaining challenges in flexible thermoelectric materials are discussed in conclusion, and suggestions and a framework to guide future development are provided, which may pave the way for a bright future for flexible thermoelectric devices in the energy market.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–248 of 248
Coulomb Forces and Doping in Organic Semiconductors
Gregg, B. A., Chen, S.-G., & Cormier, R. A. (2004) · Chemistry of Materials · doi:10.1021/cm049625c · Cited by 116
Zhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Macromolecules · doi:10.1021/ma4020406 · Cited by 113
Fan, Z., Du, D., Yao, H., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15158 · Cited by 112
Polaron Delocalization in Conjugated Polymer Films
Ghosh, R., Pochas, C. M., & Spano, F. C. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b02917 · Cited by 107
Moriarty, G. P., Wheeler, J. N., Yu, C., & Grunlan, J. C. (2011) · Carbon · doi:10.1016/j.carbon.2011.09.050 · Cited by 106
Thermal characterization of anisotropic thin dielectric films using harmonic Joule heating
Ju, Y. S., Kurabayashi, K., & Goodson, K. E. (1999) · Thin Solid Films · doi:10.1016/s0040-6090(98)01328-5 · Cited by 106
Exploring Peltier effect in organic thermoelectric films
Jin, W., Liu, L., Yang, T., Shen, H., Zhu, J. Y., Xu, W., Li, S., Li, Q., Chi, L., Di, C., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05999-4 · Cited by 106
Liu, J., Yoon, B., Kuhlmann, E., Tian, M., Zhu, J., George, S. M., Lee, Y.-C., & Yang, R. (2013) · Nano Letters · doi:10.1021/nl403244s · Cited by 105
Petsagkourakis, I., Pavlopoulou, E., Cloutet, É., Chen, Y. F., Liu, X., Fahlman, M., Magnus Berggren, A., Xavier Crispin, A., Dilhaire, S., Fleury, G., et al. (2017) · Organic Electronics · doi:10.1016/j.orgel.2017.11.018 · Cited by 105
Yoon, B., Seghete, D., Cavanagh, A. S., & George, S. M. (2009) · Chemistry of Materials · doi:10.1021/cm9013267 · Cited by 104
Karttunen, A. J., Tynell, T., & Karppinen, M. J. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03433 · Cited by 104
An, C. J., Kang, Y. H., Song, H., Jeong, Y., & Cho, S. Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02509b · Cited by 102
Chabinyc, M. L. (2014) · Nature Materials · doi:10.1038/nmat3859 · Cited by 93
Nanostructural Tailoring to Induce Flexibility in Thermoelectric Ca3Co4O9 Thin Films
Paul, B., Lu, J., & Eklund, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06301 · Cited by 91
Du, Y., Cai, K., Shen, S. Z., Donelsonand, R., Xu, J. Y., Wang, H., & Lin, T. (2017) · RSC Advances · doi:10.1039/c7ra08663f · Cited by 91
Zheng, Y., Zeng, H., Zhu, Q., & Xu, J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01900b · Cited by 91
Thermoelectric model to characterize carrier transport in organic semiconductors
Kim, G., & Pipe, K. P. (2012) · Physical Review B · doi:10.1103/physrevb.86.085208 · Cited by 88
Stretchable organic memory: toward learnable and digitized stretchable electronic applications
Lai, Y., Huang, Y.-C., Lin, T.-Y., Wang, Y.-X., Chang, C.-Y., Li, Y., Lin, T.-Y., Ye, B., Hsieh, Y., Su, W., et al. (2014) · NPG Asia Materials · doi:10.1038/am.2013.85 · Cited by 83
Self-citationRoll-to-roll printing of flexible thin-film organic thermoelectric devices
Zhang, Z., Qiu, J., & Wang, S. (2016) · Manufacturing Letters · doi:10.1016/j.mfglet.2016.04.002 · Cited by 82
Anisotropic Thermal Properties of Solid Polymers
Kurabayashi, K. (2001) · International Journal of Thermophysics · doi:10.1023/a:1006728223978 · Cited by 79
Tynell, T., Giri, A., Gaskins, J. T., Hopkins, P. E., Mele, P., Miyazaki, K., & Karppinen, M. J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02381a · Cited by 74
Large‐scale integration of flexible materials into rolled and corrugated thermoelectric modules
Fang, H., Popere, B. C., Thomas, E. M., Mai, C., Chang, W. B., Bazan, G. C., Chabinyc, M. L., & Segalman, R. A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44208 · Cited by 70
Flexible Thermoelectric ZnO–Organic Superlattices on Cotton Textile Substrates by ALD/MLD
Karttunen, A. J., Sarnes, L., Townsend, R., Mikkonen, J. V., & Karppinen, M. J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600459 · Cited by 69
Bulk Interpenetration Network of Thermoelectric Polymer in Insulating Supporting Matrix
Lu, G., Bu, L., Li, S., & Yang, X. (2014) · Advanced Materials · doi:10.1002/adma.201305320 · Cited by 68
Thermoelectric Properties of Molecular Nanowires
Wang, Y., Zhou, J., & Yang, R. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp208490q · Cited by 68
Self-citationNanoporous Ca3Co4O9 Thin Films for Transferable Thermoelectrics
Paul, B., Björk, E. M., Kumar, A., Lu, J., & Eklund, P. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00333 · Cited by 67
Xu, K., Chen, G., & Qiu, D. (2015) · Chemistry - An Asian Journal · doi:10.1002/asia.201500066 · Cited by 66
Choi, H., Kim, Y. J., Kim, C. S., Yang, H. M., Oh, M., & Cho, B. J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.031 · Cited by 66
Rojas, J. P., Singh, D. N., Inayat, S. B., Sevilla, G. A. T., Fahad, H. M., & Hussain, M. M. (2017) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0081703jss · Cited by 64
Wearable and flexible thermoelectrics for energy harvesting
Tian, R., Wan, C., Hayashi, N., Aoai, T., & Koumoto, K. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.8 · Cited by 61
A Review on the Fabrication of Polymer‐Based Thermoelectric Materials and Fabrication Methods
Kamarudin, M. A., Sahamir, S. R., Datta, R. S., Long, B. D., Sabri, M. F. M., & Said, S. M. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/713640 · Cited by 60
Ichikawa, S., & Toshima, N. (2015) · Polymer Journal · doi:10.1038/pj.2015.28 · Cited by 47
Nam, S., Shin, M., Kim, H., Ha, C., Ree, M., & Kim, Y. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101215 · Cited by 44
Highly enhanced thermoelectric performance of WS 2 nanosheets upon embedding PEDOT:PSS
Wang, T., Liu, C., Wang, X., Li, X., Jiang, F., Li, C., Hou, J., & Xu, J. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24349 · Cited by 42
Ultra-low thermal conductivity in TiO 2 :C superlattices
Niemelä, J., Giri, A., Hopkins, P. E., & Karppinen, M. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01719j · Cited by 41
Wang, Y. Y., Cai, K., Shen, S., & Yao, X. (2015) · Synthetic Metals · doi:10.1016/j.synthmet.2015.08.034 · Cited by 39
Self-citationRevealing the Electron–Phonon Coupling in a Conjugated Polymer by Single‐Molecule Spectroscopy
Hildner, R., Lemmer, U., Scherf, U., van Heel, M., & Köhler, J. R. (2007) · Advanced Materials · doi:10.1002/adma.200602718 · Cited by 39
Du, Y., Chen, J., Liu, X., Lu, C. P., Xu, J., Paul, B., & Eklund, P. (2018) · Coatings · doi:10.3390/coatings8010025 · Cited by 39
Karttunen, A. J., Tynell, T., & Karppinen, M. J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.028 · Cited by 36
Fabrication and characterization of ultrathin thermoelectric device for energy conversion
Mu, E., Yang, G., Fu, X., Wang, F., & Hu, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.031 · Cited by 36
Lee, D., Sayed, S. Y., Lee, S., Kuryak, C. A., Zhou, J., Chen, G., & Shao‐Horn, Y. (2016) · Nanoscale · doi:10.1039/c6nr06950a · Cited by 34
Reasons behind the improved thermoelectric properties of poly(3-hexylthiophene) nanofiber networks
Endrődi, B., Mellár, J., Gingl, Z., Visy, C., & Janáky, C. (2014) · RSC Advances · doi:10.1039/c4ra09037c · Cited by 32
Huang, Z., Zhang, H., Yang, L., Zhu, B., Zheng, K., Hong, M., Yu, Y., Zu, F., Zou, J., & Chen, Z. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.06.011 · Cited by 32
Self-citationStatz, M., Venkateshvaran, D., Jiao, X., Schott, S., McNeill, C. R., Emin, D., Sirringhaus, H., & Pietro, R. D. (2018) · Communications Physics · doi:10.1038/s42005-018-0016-5 · Cited by 31
Xu, S., Zhu, W., Zhao, H., Xu, L., Sheng, P., Zhao, G., & Deng, Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.12.011 · Cited by 30
Enhancement in thermoelectric properties using a P‐type and N‐type thin‐film device structure
Xu, L., Liu, Y., Chen, B., Zhao, C., & Lu, K. S. (2013) · Polymer Composites · doi:10.1002/pc.22576 · Cited by 23
Mortazavinatanzi, S., Rezania, A., & Rosendahl, L. A. (2018) · Sensors · doi:10.3390/s18040989 · Cited by 20
Co-doped Sb 2 Te 3 paramagnetic nanoplates
Yang, L., Chen, Z., Nie, T., Han, G., Zhang, Z., Hong, M., Wang, K. L., & Zou, J. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc03767k · Cited by 14
Self-citation
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationTechnology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Self-citationEnd-to-end design of wearable sensors
Ates, H. C., Nguyen, P. Q., Gonzalez-Macia, L., Morales-Narváez, E., Güder, F., Collins, J. J., & Dincer, C. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00460-x · Cited by 1,306
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Emerging Materials and Strategies for Personal Thermal Management
Hu, R., Liu, Y., Shin, S., Huang, S., Ren, X., Shu, W., Cheng, J., Tao, G., Xu, W., Chen, R., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903921 · Cited by 638
Metadata
- Authors
- Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-30
- Volume
- 31
- Issue
- 29
- Pages
- e1807916-e1807916
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2947639299
- Cited by
- 751
- References
- 248
- FWCI
- 30.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.