The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Open accessAbstract
Additive manufacturing (AM) technologies appear as a paradigm for scalable manufacture of electrochemical energy storage (EES) devices, where complex 3D architectures are typically required but are hard to achieve using conventional techniques. The combination of these technologies and innovative material formulations that maximize surface area accessibility and ion transport within electrodes while minimizing space are of growing interest. Herein, aqueous inks composed of atomically thin (1–3 nm) 2D Ti 3 C 2 Tx with large lateral size of about 8 µm possessing ideal viscoelastic properties are formulated for extrusion‐based 3D printing of freestanding, high specific surface area architectures to determine the viability of manufacturing energy storage devices. The 3D‐printed device achieves a high areal capacitance of 2.1 F cm−2 at 1.7 mA cm−2 and a gravimetric capacitance of 242.5 F g−1 at 0.2 A g−1 with a retention of above 90% capacitance for 10 000 cycles. It also exhibits a high energy density of 0.0244 mWh cm−2 and a power density of 0.64 mW cm−2 at 4.3 mA cm−2. It is anticipated that the sustainable printing and design approach developed in this work can be applied to fabricate high‐performance bespoke multiscale and multidimensional architectures of functional and structural materials for integrated devices in various applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance
Yan, J., Ren, C. E., Maleski, K., Hatter, C. B., Anasori, B., Urbankowski, P., Sarycheva, A., & Gogotsi, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701264 · Cited by 1,883
Lipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes
Xia, Y., Mathis, T. S., Zhao, M.-Q., Anasori, B., Dang, A., Zhou, Z., Cho, H., Gogotsi, Y., & Yang, S. (2018) · Nature · doi:10.1038/s41586-018-0109-z · Cited by 1,310
Zhang, C. (., Anasori, B., Seral‐Ascaso, A., Park, S., McEvoy, N., Shmeliov, A., Duesberg, G. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2017) · Advanced Materials · doi:10.1002/adma.201702678 · Cited by 1,159
All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors
Jiang, Q., Kurra, N., Alhabeb, M., Gogotsi, Y., & Alshareef, H. N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703043 · Cited by 1,033
Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties
Hantanasirisakul, K., Zhao, M., Urbankowski, P., Halim, J., Anasori, B., Kota, S., Ren, C. E., Barsoum, M. W., & Gogotsi, Y. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600050 · Cited by 838
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Beidaghi, M., & Wang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201292 · Cited by 812
Nitrogen-doped Ti3C2Tx MXene electrodes for high-performance supercapacitors
Wen, Y., Rufford, T. E., Chen, X., Li, N., Lyu, M., Dai, L., & Wang, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.06.009 · Cited by 807
All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage
Peng, Y.-Y., Akuzum, B., Kurra, N., Zhao, M.-Q., Alhabeb, M., Anasori, B., Kumbur, E. C., Alshareef, H. N., Ger, M.-D., & Gogotsi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01717g · Cited by 697
Rheology of Polypropylene/Clay Hybrid Materials
Solomon, M. J., Almusallam, A. S., Seefeldt, K. F., Somwangthanaroj, A., & Varadan, P. (2001) · Macromolecules · doi:10.1021/ma001122e · Cited by 653
Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
2D titanium carbide (MXene) for wireless communication
Sarycheva, A., Polemi, A., Liu, Y., Dandekar, K., Anasori, B., & Gogotsi, Y. (2018) · Science Advances · doi:10.1126/sciadv.aau0920 · Cited by 542
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Jagiello, J., & Thommes, M. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.022 · Cited by 478
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Honda, W., Harada, S., Arie, T., Akita, S., & Takei, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303874 · Cited by 456
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Fang, Y., Liu, Z., Han, J., Jin, Z., Han, Y., Wang, F., Niu, Y., Wu, Y., & Xu, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803406 · Cited by 427
Synthesis and electrochemical performance of Ti3C2Tx with hydrothermal process
Wang, L., Zhang, H., Wang, B., Shen, C., Zhang, C., Hu, Q., Zhou, A., & Liu, B. (2016) · Electronic Materials Letters · doi:10.1007/s13391-016-6088-z · Cited by 409
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Self-citationXu, S., Wei, G., Li, J., Ji, Y., Klyui, N., Izotov, V., & Han, W. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.144 · Cited by 293
Effect of Edge Charges on Stability and Aggregation of Ti3C2Tz MXene Colloidal Suspensions
Natu, V., Sokol, M., Verger, L., & Barsoum, M. W. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b08860 · Cited by 251
Oxide Thin‐Film Electronics using All‐MXene Electrical Contacts
Wang, Z., Kim, H., & Alshareef, H. N. (2018) · Advanced Materials · doi:10.1002/adma.201706656 · Cited by 237
3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Yu, W., Zhou, H., Li, B. Q., & Ding, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13904 · Cited by 227
Blake, A. J., Kohlmeyer, R. R., Hardin, J. O., Carmona, E. A., Maruyama, B., Berrigan, J. D., Huang, H., & Durstock, M. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602920 · Cited by 217
Rocha, V. G., García-Tuñón, E., Botas, C., Markoulidis, F., Feilden, E., D’Elia, E., Ni, N., Shaffer, M., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10285 · Cited by 191
3D Printing by Multiphase Silicone/Water Capillary Inks
Roh, S., Parekh, D. P., Bharti, B., Stoyanov, S. D., & Velev, O. D. (2017) · Advanced Materials · doi:10.1002/adma.201701554 · Cited by 187
Transparent, conductive solution processed spincast 2D Ti2CTx (MXene) films
Ying, G., Dillon, A. D., Fafarman, A. T., & Barsoum, M. W. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1296043 · Cited by 178
An easily manipulated protocol for patterning of MXenes on paper for planar micro-supercapacitors
Hu, H., & Hua, T. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04735e · Cited by 149
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
García‐Tuñón, E., Feilden, E., Zheng, H. Y., D’Elia, E., Leong, A., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07717 · Cited by 114
Shen, D., Zou, G., Liu, L., Zhao, W., Wu, A., Duley, W. W., & Zhou, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14410 · Cited by 71
Chen, B., Zhu, Z., Hong, J., Wen, Z., Ma, J., Qiu, Y., & Chen, J. (2014) · Dalton Transactions · doi:10.1039/c4dt01101e · Cited by 65
Bao, C., Zhang, H., Wilkie, C. A., Bi, S., Tang, X., Wu, J. F., & Yang, J. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.097 · Cited by 35
Self-citation
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Scalable Manufacturing of Free‐Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity
Zhang, J., Kong, N., Uzun, S., Levitt, A., Seyedin, S., Lynch, P. A., Qin, S., Han, M., Yang, W., Liu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001093 · Cited by 972
Self-citationCharacterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Heteroatom‐Doped and Oxygen‐Functionalized Nanocarbons for High‐Performance Supercapacitors
Ghosh, S., Barg, S., Jeong, S. M., & Ostrikov, K. (. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001239 · Cited by 681
Self-citation3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Metadata
- Authors
- Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-07-25
- Volume
- 31
- Issue
- 37
- Pages
- e1902725-e1902725
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2963435156
- Cited by
- 460
- References
- 43
- FWCI
- 19.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.