The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells
Abstract
Chemical interaction at a heterojunction interface induced by an appropriate chemical linker is of crucial importance for high efficiency, hysteresis‐less, and stable perovskite solar cells (PSCs). Effective interface engineering in PSCs is reported via a multifunctional chemical linker of 4‐imidazoleacetic acid hydrochloride (ImAcHCl) that can provide a chemical bridge between SnO 2 and perovskite through an ester bond with SnO 2 via esterification reaction and an electrostatic interaction with perovskite via imidazolium cation in ImAcHCl and iodide anion in perovskite. In addition, the chloride anion in ImAcHCl plays a role in the improvement of crystallinity of perovskite film crystallinity. The introduction of ImAcHCl onto SnO 2 realigns the positions of the conduction and valence bands upwards, reduces nonradiative recombination, and improves carrier life time. As a consequence, average power conversion efficiency (PCE) is increased from 18.60% ± 0.50% to 20.22% ± 0.34% before and after surface modification, respectively, which mainly results from an enhanced voltage from 1.084 ± 0.012 V to 1.143 ± 0.009 V. The best PCE of 21% is achieved by 0.1 mg mL−1 ImAcHCl treatment, along with negligible hysteresis. Moreover, an unencapsulated device with ImAcHCl‐modified SnO 2 shows much better thermal and moisture stability than unmodified SnO 2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Self-citationLong-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Jeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
Bi, D., Yi, C., Luo, J., Décoppet, J.-D., Zhang, F., Zakeeruddin, S. M., Li, X., Hagfeldt, A., & Grätzel, M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.142 · Cited by 2,037
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
A Eu 3+ -Eu 2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells
Wang, L., Zhou, H., Hu, J., Huang, B., Sun, M., Dong, B., Zheng, G., Huang, Y., Chen, Y., Li, L., et al. (2019) · Science · doi:10.1126/science.aau5701 · Cited by 1,093
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells
Jiang, Q., Zhang, X., & You, J. (2018) · Small · doi:10.1002/smll.201801154 · Cited by 924
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Bu, T., Li, J., Zheng, F., Chen, W., Wen, X., Ku, Z., Peng, Y., Zhong, J., Cheng, Y.-B., & Huang, F. (2018) · Nature Communications · doi:10.1038/s41467-018-07099-9 · Cited by 815
Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells
Zuo, L., Guo, H., deQuilettes, D. W., Jariwala, S., De Marco, N., Dong, S., DeBlock, R., Ginger, D. S., Dunn, B., Wang, M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700106 · Cited by 749
Causes and Solutions of Recombination in Perovskite Solar Cells
Chen, J., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201803019 · Cited by 733
Self-citationZuo, L., Gu, Z., Ye, T., Fu, W., Wu, G., Li, H., & Chen, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512518r · Cited by 676
Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells
Wang, R., Xue, J., Meng, L., Lee, J.-W., Zhao, Z., Sun, P., Cai, L., Huang, T., Wang, Z., Wang, Z.-K., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.005 · Cited by 641
Ran, C., Xu, J., Gao, W., Huang, C., & Dou, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00868f · Cited by 634
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Cho, K. T., Paek, S., Grancini, G., Roldán‐Carmona, C., Gao, P., Lee, Y., & Nazeeruddin, M. K. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03182j · Cited by 532
Bu, T., Liu, X., Zhou, Y., Yi, J., Huang, X., Luo, L., Xiao, J., Ku, Z., Peng, Y., Huang, F., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02634j · Cited by 516
Park, M., Kim, J.-Y., Son, H. J., Lee, C.-H., Jang, S. S., & Ko, M. J. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.060 · Cited by 496
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Perovskite Solar Cells with ZnO Electron‐Transporting Materials
Zhang, P., Wu, J., Zhang, T., Wang, Y., Liu, D., Chen, H., Ji, L., Liu, C., Ahmad, W., Chen, Z. D., et al. (2018) · Advanced Materials · doi:10.1002/adma.201703737 · Cited by 450
Cao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N. (2018) · Advanced Materials · doi:10.1002/adma.201705596 · Cited by 447
Yang, D., Yang, R., Ren, X., Zhu, X., Yang, Z., Li, C., & Liu, S. (. (2016) · Advanced Materials · doi:10.1002/adma.201600446 · Cited by 438
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Self-citationTailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells
Zuo, L., Chen, Q., De Marco, N., Hsieh, Y.-T., Chen, H., Sun, P., Chang, S.-Y., Zhao, H., Dong, S., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04015 · Cited by 373
Selective growth of layered perovskites for stable and efficient photovoltaics
Cho, K. T., Grancini, G., Lee, Y., Oveisi, E., Ryu, J., Almora, O., Tschumi, M., Schouwink, P. A., Seo, G., Heo, S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03513f · Cited by 367
Chen, J., Seo, J., & Park, N. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702714 · Cited by 299
Self-citationImpact of Interfacial Layers in Perovskite Solar Cells
Cho, A., & Park, N. (2017) · ChemSusChem · doi:10.1002/cssc.201701095 · Cited by 281
Self-citationNovel p-dopant toward highly efficient and stable perovskite solar cells
Seo, J.-Y., Kim, H.-S., Akin, S., Stojanovic, M., Simon, E., Fleischer, M., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01500g · Cited by 277
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15673 · Cited by 265
Self-citationInorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Self-citationChen, J., Kim, S., & Park, N. (2018) · Advanced Materials · doi:10.1002/adma.201801948 · Cited by 254
Self-citationZhao, X., Tao, L., Li, H., Huang, W., Sun, P., Liu, J., Liu, S., Sun, Q., Cui, Z., Sun, L., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00025 · Cited by 235
Self-citationBisquert, J., Bertoluzzi, L., Mora-Sero, I., & Garcia-Belmonte, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5062144 · Cited by 219
Inhibition of Poly(A)-binding protein with a synthetic RNA mimic reduces pain sensitization in mice
Barragán-Iglesias, P., Lou, T.-F., Bhat, V. D., Megat, S., Burton, M. D., Price, T. J., & Campbell, Z. T. (2018) · Nature Communications · doi:10.1038/s41467-017-02449-5 · Cited by 178
Chen, J., Kim, S.-G., Ren, X., Jung, H. S., & Park, N.-G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11977e · Cited by 175
Self-citationChen, J., Lee, D., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07595 · Cited by 173
Self-citationThe Progress of Interface Design in Perovskite‐Based Solar Cells
Fan, R., Huang, Y., Wang, L., Li, L., Zheng, G., & Zhou, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600460 · Cited by 164
Tavakoli, M. M., Bi, D., Pan, L., Hagfeldt, A., Zakeeruddin, S. M., & Grätzel, M. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800275 · Cited by 132
Jiang, J., Jin, Z., Lei, J., Wang, Q., Zhang, X., Zhang, J., Gao, F., & Liu, S. F. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01636k · Cited by 114
Huang, X., Hu, Z., Xu, J., Wang, P., Wang, L., Zhang, J., & Zhu, Y. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.02.010 · Cited by 93
Low-temperature processed non-TiO 2 electron selective layers for perovskite solar cells
Guo, Z., Gao, L., Zhang, C., Xu, Z., & Ma, T. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10742k · Cited by 69
Брус, В. В., Kyaw, A. K. K., Maryanchuk, P. D., & Zhang, J. (2015) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2586 · Cited by 49
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Self-citationRecent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells
Gao, F., Zhao, Y., Zhang, X., & You, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902650 · Cited by 782
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Self-citationMultifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells
Cai, Y., Cui, J., Chen, M., Zhang, M., Han, Y., Qian, F., Zhao, H., Yang, S., Yang, Z., Bian, H., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202005776 · Cited by 417
Metadata
- Authors
- Chen, J., Zhao, X., Kim, S., & Park, N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-08-12
- Volume
- 31
- Issue
- 39
- Pages
- e1902902-e1902902
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2968806744
- Cited by
- 527
- References
- 53
- FWCI
- 21.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.