The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Polymer‐Assisted Metal Deposition (PAMD) for Flexible and Wearable Electronics: Principle, Materials, Printing, and Devices
Abstract
The rapid development of flexible and wearable electronics favors low‐cost, solution‐processing, and high‐throughput techniques for fabricating metal contacts, interconnects, and electrodes on flexible substrates of different natures. Conventional top‐down printing strategies with metal‐nanoparticle‐formulated inks based on the thermal sintering mechanism often suffer from overheating, rough film surface, low adhesion, and poor metal quality, which are not desirable for most flexible electronic applications. In recent years, a bottom‐up strategy termed as polymer‐assisted metal deposition (PAMD) shows great promise in addressing the abovementioned challenges. Here, a detailed review of the development of PAMD in the past decade is provided, covering the fundamental chemical mechanism, the preparation of various soft and conductive metallic materials, the compatibility to different printing technologies, and the applications for a wide variety of flexible and wearable electronic devices. Finally, the attributes of PAMD in comparison with conventional nanoparticle strategies are summarized and future technological and application potentials are elaborated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Ultrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Self-citationKim, R.-H., Kim, D.-H., Xiao, J., Kim, B. H., Park, S.-I., Panilaitis, B., Ghaffari, R., Yao, J., Li, M., Liu, Z., et al. (2010) · Nature Materials · doi:10.1038/nmat2879 · Cited by 637
Park, S., Kim, H., Vosgueritchian, M., Cheon, S., Kim, H., Koo, J. H., Kim, T. R., Lee, S., Schwartz, G., Chang, H., et al. (2014) · Advanced Materials · doi:10.1002/adma.201402574 · Cited by 565
Cited by
Functional Conductive Hydrogels for Bioelectronics
Fu, F., Wang, J., Zeng, H., & Yu, J. (2020) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00309 · Cited by 364
Chen, X., Xu, G., Zeng, G., Gu, H., Chen, H., Xu, H., Yao, H., Li, Y., Hou, J., & Li, Y. (2020) · Advanced Materials · doi:10.1002/adma.201908478 · Cited by 308
Hassan, M., Abbas, G., Li, N., Afzal, A., Haider, Z., Ahmed, S., Xu, X., Pan, C., & Peng, Z. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202100773 · Cited by 284
Porous Conductive Textiles for Wearable Electronics
Ding, Y., Jiang, J., Wu, Y., Zhang, Y., Zhou, J., Zhang, Y., Huang, Q., & Zheng, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00507 · Cited by 269
Self-citation
Metadata
- Authors
- Li, P., Zhang, Y., & Zheng, Z.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-07-15
- Volume
- 31
- Issue
- 37
- Pages
- e1902987-e1902987
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2960200605
- Cited by
- 183
- References
- 4
- FWCI
- 9.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymer‐Assisted Metal Deposition (PAMD) for Flexible and Wearable Electronics: Principle, Materials, Printing, and Devices. https://app.cochat.ai/papers/10.1002/adma.201902987
- The paper
- Li, P., Zhang, Y., & Zheng, Z. (2019). Polymer‐Assisted Metal Deposition (PAMD) for Flexible and Wearable Electronics: Principle, Materials, Printing, and Devices. Advanced Materials. https://doi.org/10.1002/adma.201902987
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.